Driver issue on Linux 2.6.35-22-generic-pae #33-Ubuntu SMP

Driver issue on Linux 2.6.35-22-generic-pae #33-Ubuntu SMP

[Colum.Flannigan]

[-- Attachment #1: Type: text/plain, Size: 707 bytes --]

Hi,

   I am writing to this address as it is the address listed in the mod info. I purchased 3 of your cards for my infrastucture and am haven an issue with my linux system i am testing this on. Currently i have 1 card installed on this system and it is working fine, however the gigabit card i got from Netgear does not show in the system

I have checked my dmesg's and have no errors relatting to this and the lsmod command does not show it in the list..

I also tried to install the drive listed on the site, but that failed to work as i got errors when running.. Errors were stating the MakeFile did not exist.

Have you any ideas what this could be?? or steps to resolve??

Thanks
Colum

Re: Driver issue on Linux 2.6.35-22-generic-pae #33-Ubuntu SMP

[Francois Romieu]

Colum.Flannigan@omegasrvshn.com <Colum.Flannigan@omegasrvshn.com> :
[...]
> I am writing to this address as it is the address listed in the mod info.

Please be nice with me and cut your lines below 80 characters.

> I purchased 3 of your cards for my infrastucture and am haven an issue with
> my linux system i am testing this on. Currently i have 1 card installed on
> this system and it is working fine, however the gigabit card i got from
> Netgear does not show in the system.

You forgot to specify the kind of card you are using.

(3x) Netgear GA311 ?

> I have checked my dmesg's and have no errors relatting to this and
> the lsmod command does not show it in the list...

The device driver can not help much as long as lsmod does not list
the card. If it is a PCI device detection problem (i.e. card correctly
inserted, slot and card ok), you may take it on linux-kernel but you
will probably be required to try a more recent kernel and provide more
info (lspci -H1 and -H2 output, dmesg, etc.).

-- 
Ueimor