* [PATCH] usb: plusb: Add support for National Instruments host-to-host cable
@ 2015-02-16 19:47 Ben Shelton
2015-02-20 20:14 ` David Miller
0 siblings, 1 reply; 6+ messages in thread
From: Ben Shelton @ 2015-02-16 19:47 UTC (permalink / raw)
To: linux-usb, netdev, linux-kernel; +Cc: Ben Shelton
The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it.
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
---
drivers/net/usb/plusb.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 3d18bb0..1bfe0fc 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -134,6 +134,11 @@ static const struct usb_device_id products [] = {
}, {
USB_DEVICE(0x050d, 0x258a), /* Belkin F5U258/F5U279 (PL-25A1) */
.driver_info = (unsigned long) &prolific_info,
+}, {
+ USB_DEVICE(0x3923, 0x7825), /* National Instruments USB
+ * Host-to-Host Cable
+ */
+ .driver_info = (unsigned long) &prolific_info,
},
{ }, // END
--
2.3.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] usb: plusb: Add support for National Instruments host-to-host cable
2015-02-16 19:47 [PATCH] usb: plusb: Add support for National Instruments host-to-host cable Ben Shelton
@ 2015-02-20 20:14 ` David Miller
2015-02-27 21:26 ` Ben Shelton
0 siblings, 1 reply; 6+ messages in thread
From: David Miller @ 2015-02-20 20:14 UTC (permalink / raw)
To: ben.shelton; +Cc: linux-usb, netdev, linux-kernel
From: Ben Shelton <ben.shelton@ni.com>
Date: Mon, 16 Feb 2015 13:47:06 -0600
> The National Instruments USB Host-to-Host Cable is based on the Prolific
> PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it.
>
> Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] usb: plusb: Add support for National Instruments host-to-host cable
2015-02-20 20:14 ` David Miller
@ 2015-02-27 21:26 ` Ben Shelton
2015-02-27 22:35 ` David Miller
0 siblings, 1 reply; 6+ messages in thread
From: Ben Shelton @ 2015-02-27 21:26 UTC (permalink / raw)
To: David Miller; +Cc: linux-usb, netdev, linux-kernel
On 02/20, David Miller wrote:
> From: Ben Shelton <ben.shelton@ni.com>
> Date: Mon, 16 Feb 2015 13:47:06 -0600
>
> > The National Instruments USB Host-to-Host Cable is based on the Prolific
> > PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it.
> >
> > Signed-off-by: Ben Shelton <ben.shelton@ni.com>
>
> Applied, thanks.
Hi David,
Is this something you think would go into stable as well?
Thanks,
Ben
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] usb: plusb: Add support for National Instruments host-to-host cable
2015-02-27 21:26 ` Ben Shelton
@ 2015-02-27 22:35 ` David Miller
2015-03-02 16:00 ` Ben Shelton
0 siblings, 1 reply; 6+ messages in thread
From: David Miller @ 2015-02-27 22:35 UTC (permalink / raw)
To: ben.shelton; +Cc: linux-usb, netdev, linux-kernel
From: Ben Shelton <ben.shelton@ni.com>
Date: Fri, 27 Feb 2015 15:26:32 -0600
> On 02/20, David Miller wrote:
>> From: Ben Shelton <ben.shelton@ni.com>
>> Date: Mon, 16 Feb 2015 13:47:06 -0600
>>
>> > The National Instruments USB Host-to-Host Cable is based on the Prolific
>> > PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it.
>> >
>> > Signed-off-by: Ben Shelton <ben.shelton@ni.com>
>>
>> Applied, thanks.
>
> Hi David,
>
> Is this something you think would go into stable as well?
I'm ambivalent.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] usb: plusb: Add support for National Instruments host-to-host cable
2015-02-27 22:35 ` David Miller
@ 2015-03-02 16:00 ` Ben Shelton
2015-03-02 20:26 ` David Miller
0 siblings, 1 reply; 6+ messages in thread
From: Ben Shelton @ 2015-03-02 16:00 UTC (permalink / raw)
To: David Miller; +Cc: linux-usb, netdev, linux-kernel
On 02/27, David Miller wrote:
> From: Ben Shelton <ben.shelton@ni.com>
> Date: Fri, 27 Feb 2015 15:26:32 -0600
>
> > On 02/20, David Miller wrote:
> >> From: Ben Shelton <ben.shelton@ni.com>
> >> Date: Mon, 16 Feb 2015 13:47:06 -0600
> >>
> >> > The National Instruments USB Host-to-Host Cable is based on the Prolific
> >> > PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it.
> >> >
> >> > Signed-off-by: Ben Shelton <ben.shelton@ni.com>
> >>
> >> Applied, thanks.
> >
> > Hi David,
> >
> > Is this something you think would go into stable as well?
>
> I'm ambivalent.
In that case, could you go ahead and apply it to stable as well?
Thanks,
Ben
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] usb: plusb: Add support for National Instruments host-to-host cable
2015-03-02 16:00 ` Ben Shelton
@ 2015-03-02 20:26 ` David Miller
0 siblings, 0 replies; 6+ messages in thread
From: David Miller @ 2015-03-02 20:26 UTC (permalink / raw)
To: ben.shelton; +Cc: linux-usb, netdev, linux-kernel
From: Ben Shelton <ben.shelton@ni.com>
Date: Mon, 2 Mar 2015 10:00:14 -0600
> On 02/27, David Miller wrote:
>> From: Ben Shelton <ben.shelton@ni.com>
>> Date: Fri, 27 Feb 2015 15:26:32 -0600
>>
>> > On 02/20, David Miller wrote:
>> >> From: Ben Shelton <ben.shelton@ni.com>
>> >> Date: Mon, 16 Feb 2015 13:47:06 -0600
>> >>
>> >> > The National Instruments USB Host-to-Host Cable is based on the Prolific
>> >> > PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it.
>> >> >
>> >> > Signed-off-by: Ben Shelton <ben.shelton@ni.com>
>> >>
>> >> Applied, thanks.
>> >
>> > Hi David,
>> >
>> > Is this something you think would go into stable as well?
>>
>> I'm ambivalent.
>
> In that case, could you go ahead and apply it to stable as well?
Done.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-03-02 20:26 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-16 19:47 [PATCH] usb: plusb: Add support for National Instruments host-to-host cable Ben Shelton
2015-02-20 20:14 ` David Miller
2015-02-27 21:26 ` Ben Shelton
2015-02-27 22:35 ` David Miller
2015-03-02 16:00 ` Ben Shelton
2015-03-02 20:26 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox