From: Stephen Hemminger <stephen@networkplumber.org>
To: kys@microsoft.com, haiyangz@microsoft.com, sthemmin@microsoft.com
Cc: devel@linuxdriverproject.org, netdev@vger.kernel.org
Subject: [PATCH net-next 10/10] netvsc: keep track of some non-fatal overload conditions
Date: Wed, 9 Aug 2017 17:46:12 -0700 [thread overview]
Message-ID: <20170810004612.22163-11-sthemmin@microsoft.com> (raw)
In-Reply-To: <20170810004612.22163-1-sthemmin@microsoft.com>
Add ethtool statistics for case where send chimmeny buffer is
exhausted and driver has to fall back to doing scatter/gather
send. Also, add statistic for case where ring buffer is full and
receive completions are delayed.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
---
drivers/net/hyperv/hyperv_net.h | 2 ++
drivers/net/hyperv/netvsc.c | 19 +++++++++++++------
drivers/net/hyperv/netvsc_drv.c | 2 ++
3 files changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 4ccfc335a356..345786321879 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -680,6 +680,8 @@ struct netvsc_ethtool_stats {
unsigned long tx_no_space;
unsigned long tx_too_big;
unsigned long tx_busy;
+ unsigned long tx_send_full;
+ unsigned long rx_comp_busy;
};
struct netvsc_vf_pcpu_stats {
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 5b3a2b8fa77e..938c9f3d2ea6 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -882,7 +882,9 @@ int netvsc_send(struct net_device_context *ndev_ctx,
} else if (pktlen + net_device->pkt_align <
net_device->send_section_size) {
section_index = netvsc_get_next_send_section(net_device);
- if (section_index != NETVSC_INVALID_INDEX) {
+ if (unlikely(section_index == NETVSC_INVALID_INDEX)) {
+ ++ndev_ctx->eth_stats.tx_send_full;
+ } else {
move_pkt_msd(&msd_send, &msd_skb, msdp);
msd_len = 0;
}
@@ -948,9 +950,10 @@ int netvsc_send(struct net_device_context *ndev_ctx,
}
/* Send pending recv completions */
-static int send_recv_completions(struct netvsc_channel *nvchan)
+static int send_recv_completions(struct net_device *ndev,
+ struct netvsc_device *nvdev,
+ struct netvsc_channel *nvchan)
{
- struct netvsc_device *nvdev = nvchan->net_device;
struct multi_recv_comp *mrc = &nvchan->mrc;
struct recv_comp_msg {
struct nvsp_message_header hdr;
@@ -968,8 +971,12 @@ static int send_recv_completions(struct netvsc_channel *nvchan)
msg.status = rcd->status;
ret = vmbus_sendpacket(nvchan->channel, &msg, sizeof(msg),
rcd->tid, VM_PKT_COMP, 0);
- if (unlikely(ret))
+ if (unlikely(ret)) {
+ struct net_device_context *ndev_ctx = netdev_priv(ndev);
+
+ ++ndev_ctx->eth_stats.rx_comp_busy;
return ret;
+ }
if (++mrc->first == nvdev->recv_completion_cnt)
mrc->first = 0;
@@ -1010,7 +1017,7 @@ static void enq_receive_complete(struct net_device *ndev,
recv_comp_slot_avail(nvdev, mrc, &filled, &avail);
if (unlikely(filled > NAPI_POLL_WEIGHT)) {
- send_recv_completions(nvchan);
+ send_recv_completions(ndev, nvdev, nvchan);
recv_comp_slot_avail(nvdev, mrc, &filled, &avail);
}
@@ -1193,7 +1200,7 @@ int netvsc_poll(struct napi_struct *napi, int budget)
* then re-enable host interrupts
* and reschedule if ring is not empty.
*/
- if (send_recv_completions(nvchan) == 0 &&
+ if (send_recv_completions(ndev, net_device, nvchan) == 0 &&
work_done < budget &&
napi_complete_done(napi, work_done) &&
hv_end_read(&channel->inbound)) {
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 873c83a66cc2..b33f0507c373 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -1112,6 +1112,8 @@ static const struct {
{ "tx_no_space", offsetof(struct netvsc_ethtool_stats, tx_no_space) },
{ "tx_too_big", offsetof(struct netvsc_ethtool_stats, tx_too_big) },
{ "tx_busy", offsetof(struct netvsc_ethtool_stats, tx_busy) },
+ { "tx_send_full", offsetof(struct netvsc_ethtool_stats, tx_send_full) },
+ { "rx_comp_busy", offsetof(struct netvsc_ethtool_stats, rx_comp_busy) },
}, vf_stats[] = {
{ "vf_rx_packets", offsetof(struct netvsc_vf_pcpu_stats, rx_packets) },
{ "vf_rx_bytes", offsetof(struct netvsc_vf_pcpu_stats, rx_bytes) },
--
2.11.0
next prev parent reply other threads:[~2017-08-10 0:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-10 0:46 [PATCH net-next 00/10] netvsc: minor fixes and improvements Stephen Hemminger
2017-08-10 0:46 ` [PATCH net-next 01/10] netvsc: delay setup of VF device Stephen Hemminger
2017-08-10 0:46 ` [PATCH net-next 02/10] netvsc: don't signal host twice if empty Stephen Hemminger
2017-08-10 0:46 ` [PATCH net-next 03/10] netvsc: propagate MAC address change to VF slave Stephen Hemminger
2017-08-10 0:46 ` [PATCH net-next 04/10] netvsc: check error return when restoring channels and mtu Stephen Hemminger
2017-08-10 0:46 ` [PATCH net-next 05/10] netvsc: no need to allocate send/receive on numa node Stephen Hemminger
2017-08-10 0:46 ` [PATCH net-next 06/10] netvsc: whitespace cleanup Stephen Hemminger
2017-08-10 0:46 ` [PATCH net-next 07/10] netvsc: remove unnecessary cast of void pointer Stephen Hemminger
2017-08-10 0:46 ` [PATCH net-next 08/10] netvsc: remove unnecessary check for NULL hdr Stephen Hemminger
2017-08-10 0:46 ` [PATCH net-next 09/10] netvsc: allow controlling send/recv buffer size Stephen Hemminger
2017-08-10 0:46 ` Stephen Hemminger [this message]
2017-08-11 21:00 ` [PATCH net-next 00/10] netvsc: minor fixes and improvements David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170810004612.22163-11-sthemmin@microsoft.com \
--to=stephen@networkplumber.org \
--cc=devel@linuxdriverproject.org \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=netdev@vger.kernel.org \
--cc=sthemmin@microsoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox