From: Saeed Mahameed <saeedm@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Eugenia Emantayev <eugenia@mellanox.com>,
Saeed Mahameed <saeedm@mellanox.com>
Subject: [net 06/14] net/mlx5e: Fix defaulting RX ring size when not needed
Date: Wed, 20 Dec 2017 00:24:48 +0200 [thread overview]
Message-ID: <20171219222456.29627-7-saeedm@mellanox.com> (raw)
In-Reply-To: <20171219222456.29627-1-saeedm@mellanox.com>
From: Eugenia Emantayev <eugenia@mellanox.com>
Fixes the bug when turning on/off CQE compression mechanism
resets the RX rings size to default value when it is not
needed.
Fixes: 2fc4bfb7250d ("net/mlx5e: Dynamic RQ type infrastructure")
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en.h | 8 ++++++--
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 10 ++++++++--
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 15 +++++++--------
drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 2 +-
4 files changed, 22 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 43f9054830e5..543060c305a0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -82,6 +82,9 @@
max_t(u32, MLX5_MPWRQ_MIN_LOG_STRIDE_SZ(mdev), req)
#define MLX5_MPWRQ_DEF_LOG_STRIDE_SZ(mdev) MLX5_MPWRQ_LOG_STRIDE_SZ(mdev, 6)
#define MLX5_MPWRQ_CQE_CMPRS_LOG_STRIDE_SZ(mdev) MLX5_MPWRQ_LOG_STRIDE_SZ(mdev, 8)
+#define MLX5E_MPWQE_STRIDE_SZ(mdev, cqe_cmprs) \
+ (cqe_cmprs ? MLX5_MPWRQ_CQE_CMPRS_LOG_STRIDE_SZ(mdev) : \
+ MLX5_MPWRQ_DEF_LOG_STRIDE_SZ(mdev))
#define MLX5_MPWRQ_LOG_WQE_SZ 18
#define MLX5_MPWRQ_WQE_PAGE_ORDER (MLX5_MPWRQ_LOG_WQE_SZ - PAGE_SHIFT > 0 ? \
@@ -936,8 +939,9 @@ void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params,
u8 cq_period_mode);
void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params,
u8 cq_period_mode);
-void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev,
- struct mlx5e_params *params, u8 rq_type);
+void mlx5e_init_rq_type_params(struct mlx5_core_dev *mdev,
+ struct mlx5e_params *params,
+ u8 rq_type);
static inline bool mlx5e_tunnel_inner_ft_supported(struct mlx5_core_dev *mdev)
{
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 23425f028405..8f05efa5c829 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1523,8 +1523,10 @@ int mlx5e_modify_rx_cqe_compression_locked(struct mlx5e_priv *priv, bool new_val
new_channels.params = priv->channels.params;
MLX5E_SET_PFLAG(&new_channels.params, MLX5E_PFLAG_RX_CQE_COMPRESS, new_val);
- mlx5e_set_rq_type_params(priv->mdev, &new_channels.params,
- new_channels.params.rq_wq_type);
+ new_channels.params.mpwqe_log_stride_sz =
+ MLX5E_MPWQE_STRIDE_SZ(priv->mdev, new_val);
+ new_channels.params.mpwqe_log_num_strides =
+ MLX5_MPWRQ_LOG_WQE_SZ - new_channels.params.mpwqe_log_stride_sz;
if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) {
priv->channels.params = new_channels.params;
@@ -1536,6 +1538,10 @@ int mlx5e_modify_rx_cqe_compression_locked(struct mlx5e_priv *priv, bool new_val
return err;
mlx5e_switch_priv_channels(priv, &new_channels, NULL);
+ mlx5e_dbg(DRV, priv, "MLX5E: RxCqeCmprss was turned %s\n",
+ MLX5E_GET_PFLAG(&priv->channels.params,
+ MLX5E_PFLAG_RX_CQE_COMPRESS) ? "ON" : "OFF");
+
return 0;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index c535a44ab8ac..d9d8227f195f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -78,8 +78,8 @@ static bool mlx5e_check_fragmented_striding_rq_cap(struct mlx5_core_dev *mdev)
MLX5_CAP_ETH(mdev, reg_umr_sq);
}
-void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev,
- struct mlx5e_params *params, u8 rq_type)
+void mlx5e_init_rq_type_params(struct mlx5_core_dev *mdev,
+ struct mlx5e_params *params, u8 rq_type)
{
params->rq_wq_type = rq_type;
params->lro_wqe_sz = MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ;
@@ -88,10 +88,8 @@ void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev,
params->log_rq_size = is_kdump_kernel() ?
MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE_MPW :
MLX5E_PARAMS_DEFAULT_LOG_RQ_SIZE_MPW;
- params->mpwqe_log_stride_sz =
- MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS) ?
- MLX5_MPWRQ_CQE_CMPRS_LOG_STRIDE_SZ(mdev) :
- MLX5_MPWRQ_DEF_LOG_STRIDE_SZ(mdev);
+ params->mpwqe_log_stride_sz = MLX5E_MPWQE_STRIDE_SZ(mdev,
+ MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS));
params->mpwqe_log_num_strides = MLX5_MPWRQ_LOG_WQE_SZ -
params->mpwqe_log_stride_sz;
break;
@@ -115,13 +113,14 @@ void mlx5e_set_rq_type_params(struct mlx5_core_dev *mdev,
MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS));
}
-static void mlx5e_set_rq_params(struct mlx5_core_dev *mdev, struct mlx5e_params *params)
+static void mlx5e_set_rq_params(struct mlx5_core_dev *mdev,
+ struct mlx5e_params *params)
{
u8 rq_type = mlx5e_check_fragmented_striding_rq_cap(mdev) &&
!params->xdp_prog && !MLX5_IPSEC_DEV(mdev) ?
MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ :
MLX5_WQ_TYPE_LINKED_LIST;
- mlx5e_set_rq_type_params(mdev, params, rq_type);
+ mlx5e_init_rq_type_params(mdev, params, rq_type);
}
static void mlx5e_update_carrier(struct mlx5e_priv *priv)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
index d2a66dc4adc6..8812d7208e8f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
@@ -57,7 +57,7 @@ static void mlx5i_build_nic_params(struct mlx5_core_dev *mdev,
struct mlx5e_params *params)
{
/* Override RQ params as IPoIB supports only LINKED LIST RQ for now */
- mlx5e_set_rq_type_params(mdev, params, MLX5_WQ_TYPE_LINKED_LIST);
+ mlx5e_init_rq_type_params(mdev, params, MLX5_WQ_TYPE_LINKED_LIST);
/* RQ size in ipoib by default is 512 */
params->log_rq_size = is_kdump_kernel() ?
--
2.13.0
next prev parent reply other threads:[~2017-12-19 22:28 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 22:24 [pull request][net 00/14] Mellanox, mlx5 fixes 2017-12-19 Saeed Mahameed
2017-12-19 22:24 ` [net 01/14] net/mlx5: FPGA, return -EINVAL if size is zero Saeed Mahameed
2017-12-19 22:24 ` [net 02/14] Revert "mlx5: move affinity hints assignments to generic code" Saeed Mahameed
2017-12-19 22:42 ` Jes Sorensen
2017-12-25 13:53 ` Sagi Grimberg
2017-12-26 15:58 ` Saeed Mahameed
2017-12-26 17:14 ` Sagi Grimberg
2018-01-04 20:19 ` Saeed Mahameed
2017-12-19 22:24 ` [net 03/14] net/mlx5: Fix rate limit packet pacing naming and struct Saeed Mahameed
2017-12-19 22:24 ` [net 04/14] net/mlx5e: Fix ETS BW check Saeed Mahameed
2017-12-20 7:42 ` Or Gerlitz
2017-12-19 22:24 ` [net 05/14] net/mlx5e: Fix features check of IPv6 traffic Saeed Mahameed
2017-12-20 7:45 ` Or Gerlitz
2017-12-19 22:24 ` Saeed Mahameed [this message]
2017-12-19 22:24 ` [net 07/14] net/mlx5: Fix misspelling in the error message and comment Saeed Mahameed
2017-12-19 22:24 ` [net 08/14] net/mlx5: Fix error flow in CREATE_QP command Saeed Mahameed
2017-12-19 22:24 ` [net 09/14] net/mlx5e: Fix possible deadlock of VXLAN lock Saeed Mahameed
2017-12-19 22:24 ` [net 10/14] net/mlx5e: Add refcount to VXLAN structure Saeed Mahameed
2017-12-19 22:24 ` [net 11/14] net/mlx5e: Prevent possible races in VXLAN control flow Saeed Mahameed
2017-12-19 22:24 ` [net 12/14] net/mlx5: Fix steering memory leak Saeed Mahameed
2017-12-19 22:24 ` [net 13/14] net/mlx5: Cleanup IRQs in case of unload failure Saeed Mahameed
2017-12-19 22:24 ` [net 14/14] net/mlx5: Stay in polling mode when command EQ destroy fails Saeed Mahameed
2017-12-20 18:42 ` [pull request][net 00/14] Mellanox, mlx5 fixes 2017-12-19 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219222456.29627-7-saeedm@mellanox.com \
--to=saeedm@mellanox.com \
--cc=davem@davemloft.net \
--cc=eugenia@mellanox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox