From: Ido Schimmel <idosch@mellanox.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, yuvalm@mellanox.com, jiri@mellanox.com,
nikolay@cumulusnetworks.com, Ido Schimmel <idosch@mellanox.com>
Subject: [PATCH net-next 08/15] mlxsw: reg: Add register settings for IPv6 multicast routing
Date: Mon, 26 Mar 2018 15:01:38 +0300 [thread overview]
Message-ID: <20180326120145.11752-9-idosch@mellanox.com> (raw)
In-Reply-To: <20180326120145.11752-1-idosch@mellanox.com>
From: Yuval Mintz <yuvalm@mellanox.com>
Add new fields for the rmft register necessary for setting the IPv6
multicast FIB table. Add a matching wrapper function for filling
the register in the IPv6 scenario.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 58 +++++++++++++++++++++++--------
1 file changed, 44 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 8397bed1f372..6218231e379e 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -6318,30 +6318,34 @@ MLXSW_ITEM32(reg, rmft2, irif_mask, 0x08, 24, 1);
*/
MLXSW_ITEM32(reg, rmft2, irif, 0x08, 0, 16);
-/* reg_rmft2_dip4
- * Destination IPv4 address
+/* reg_rmft2_dip{4,6}
+ * Destination IPv4/6 address
* Access: RW
*/
+MLXSW_ITEM_BUF(reg, rmft2, dip6, 0x10, 16);
MLXSW_ITEM32(reg, rmft2, dip4, 0x1C, 0, 32);
-/* reg_rmft2_dip4_mask
+/* reg_rmft2_dip{4,6}_mask
* A bit that is set directs the TCAM to compare the corresponding bit in key. A
* bit that is clear directs the TCAM to ignore the corresponding bit in key.
* Access: RW
*/
+MLXSW_ITEM_BUF(reg, rmft2, dip6_mask, 0x20, 16);
MLXSW_ITEM32(reg, rmft2, dip4_mask, 0x2C, 0, 32);
-/* reg_rmft2_sip4
- * Source IPv4 address
+/* reg_rmft2_sip{4,6}
+ * Source IPv4/6 address
* Access: RW
*/
+MLXSW_ITEM_BUF(reg, rmft2, sip6, 0x30, 16);
MLXSW_ITEM32(reg, rmft2, sip4, 0x3C, 0, 32);
-/* reg_rmft2_sip4_mask
+/* reg_rmft2_sip{4,6}_mask
* A bit that is set directs the TCAM to compare the corresponding bit in key. A
* bit that is clear directs the TCAM to ignore the corresponding bit in key.
* Access: RW
*/
+MLXSW_ITEM_BUF(reg, rmft2, sip6_mask, 0x40, 16);
MLXSW_ITEM32(reg, rmft2, sip4_mask, 0x4C, 0, 32);
/* reg_rmft2_flexible_action_set
@@ -6359,26 +6363,52 @@ MLXSW_ITEM_BUF(reg, rmft2, flexible_action_set, 0x80,
MLXSW_REG_FLEX_ACTION_SET_LEN);
static inline void
-mlxsw_reg_rmft2_ipv4_pack(char *payload, bool v, u16 offset, u16 virtual_router,
- enum mlxsw_reg_rmft2_irif_mask irif_mask, u16 irif,
- u32 dip4, u32 dip4_mask, u32 sip4, u32 sip4_mask,
- const char *flexible_action_set)
+mlxsw_reg_rmft2_common_pack(char *payload, bool v, u16 offset,
+ u16 virtual_router,
+ enum mlxsw_reg_rmft2_irif_mask irif_mask, u16 irif,
+ const char *flex_action_set)
{
MLXSW_REG_ZERO(rmft2, payload);
mlxsw_reg_rmft2_v_set(payload, v);
- mlxsw_reg_rmft2_type_set(payload, MLXSW_REG_RMFT2_TYPE_IPV4);
mlxsw_reg_rmft2_op_set(payload, MLXSW_REG_RMFT2_OP_READ_WRITE);
mlxsw_reg_rmft2_offset_set(payload, offset);
mlxsw_reg_rmft2_virtual_router_set(payload, virtual_router);
mlxsw_reg_rmft2_irif_mask_set(payload, irif_mask);
mlxsw_reg_rmft2_irif_set(payload, irif);
+ if (flex_action_set)
+ mlxsw_reg_rmft2_flexible_action_set_memcpy_to(payload,
+ flex_action_set);
+}
+
+static inline void
+mlxsw_reg_rmft2_ipv4_pack(char *payload, bool v, u16 offset, u16 virtual_router,
+ enum mlxsw_reg_rmft2_irif_mask irif_mask, u16 irif,
+ u32 dip4, u32 dip4_mask, u32 sip4, u32 sip4_mask,
+ const char *flexible_action_set)
+{
+ mlxsw_reg_rmft2_common_pack(payload, v, offset, virtual_router,
+ irif_mask, irif, flexible_action_set);
+ mlxsw_reg_rmft2_type_set(payload, MLXSW_REG_RMFT2_TYPE_IPV4);
mlxsw_reg_rmft2_dip4_set(payload, dip4);
mlxsw_reg_rmft2_dip4_mask_set(payload, dip4_mask);
mlxsw_reg_rmft2_sip4_set(payload, sip4);
mlxsw_reg_rmft2_sip4_mask_set(payload, sip4_mask);
- if (flexible_action_set)
- mlxsw_reg_rmft2_flexible_action_set_memcpy_to(payload,
- flexible_action_set);
+}
+
+static inline void
+mlxsw_reg_rmft2_ipv6_pack(char *payload, bool v, u16 offset, u16 virtual_router,
+ enum mlxsw_reg_rmft2_irif_mask irif_mask, u16 irif,
+ struct in6_addr dip6, struct in6_addr dip6_mask,
+ struct in6_addr sip6, struct in6_addr sip6_mask,
+ const char *flexible_action_set)
+{
+ mlxsw_reg_rmft2_common_pack(payload, v, offset, virtual_router,
+ irif_mask, irif, flexible_action_set);
+ mlxsw_reg_rmft2_type_set(payload, MLXSW_REG_RMFT2_TYPE_IPV6);
+ mlxsw_reg_rmft2_dip6_memcpy_to(payload, (void *)&dip6);
+ mlxsw_reg_rmft2_dip6_mask_memcpy_to(payload, (void *)&dip6_mask);
+ mlxsw_reg_rmft2_sip6_memcpy_to(payload, (void *)&sip6);
+ mlxsw_reg_rmft2_sip6_mask_memcpy_to(payload, (void *)&sip6_mask);
}
/* MFCR - Management Fan Control Register
--
2.14.3
next prev parent reply other threads:[~2018-03-26 12:02 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-26 12:01 [PATCH net-next 00/15] mlxsw: Offload IPv6 multicast routes Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 01/15] ipmr: Make vif fib notifiers common Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 02/15] ipmr: Make MFC " Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 03/15] ipmr: Make ipmr_dump() common Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 04/15] ip6mr: Support fib notifications Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 05/15] ip6mr: Add API for default_rule fib Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 06/15] ip6mr: Add refcounting to mfc Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 07/15] mlxsw: reg: Configure RIF to forward IPv6 multicast packets Ido Schimmel
2018-03-26 12:01 ` Ido Schimmel [this message]
2018-03-26 12:01 ` [PATCH net-next 09/15] mlxsw: spectrum_mr: Pass protocol as part of catchall route params Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 10/15] mlxsw: spectrum_router: Support IPv6 multicast to host CPU Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 11/15] mlxsw: spectrum_mr: Convert into using mr_mfc Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 12/15] mlxsw: spectrum_router: Make IPMR-related APIs family agnostic Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 13/15] mlxsw: spectrum_mr: Add ipv6 specific operations Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 14/15] mlxsw: spectrum_router: Process IP6MR fib notification Ido Schimmel
2018-03-26 12:01 ` [PATCH net-next 15/15] mlxsw: spectrum: Add multicast router trap for PIMv6 Ido Schimmel
2018-03-26 17:15 ` [PATCH net-next 00/15] mlxsw: Offload IPv6 multicast routes David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180326120145.11752-9-idosch@mellanox.com \
--to=idosch@mellanox.com \
--cc=davem@davemloft.net \
--cc=jiri@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=nikolay@cumulusnetworks.com \
--cc=yuvalm@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox