From: Shahed Shaikh <shahed.shaikh@cavium.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <Manish.Chopra@cavium.com>,
<Dept-GELinuxNICDev@cavium.com>
Subject: [PATCH net 1/1] qlcnic: fix Tx descriptor corruption on 82xx devices
Date: Wed, 26 Sep 2018 12:41:10 -0700 [thread overview]
Message-ID: <20180926194110.28043-1-shahed.shaikh@cavium.com> (raw)
In regular NIC transmission flow, driver always configures MAC using
Tx queue zero descriptor as a part of MAC learning flow.
But with multi Tx queue supported NIC, regular transmission can occur on
any non-zero Tx queue and from that context it uses
Tx queue zero descriptor to configure MAC, at the same time TX queue
zero could be used by another CPU for regular transmission
which could lead to Tx queue zero descriptor corruption and cause FW
abort.
This patch fixes this in such a way that driver always configures
learned MAC address from the same Tx queue which is used for
regular transmission.
Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 8 +++++---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 3 ++-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h | 3 ++-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h | 3 ++-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 12 ++++++------
5 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 81312924df14..0c443ea98479 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -1800,7 +1800,8 @@ struct qlcnic_hardware_ops {
int (*config_loopback) (struct qlcnic_adapter *, u8);
int (*clear_loopback) (struct qlcnic_adapter *, u8);
int (*config_promisc_mode) (struct qlcnic_adapter *, u32);
- void (*change_l2_filter) (struct qlcnic_adapter *, u64 *, u16);
+ void (*change_l2_filter)(struct qlcnic_adapter *adapter, u64 *addr,
+ u16 vlan, struct qlcnic_host_tx_ring *tx_ring);
int (*get_board_info) (struct qlcnic_adapter *);
void (*set_mac_filter_count) (struct qlcnic_adapter *);
void (*free_mac_list) (struct qlcnic_adapter *);
@@ -2064,9 +2065,10 @@ static inline int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter,
}
static inline void qlcnic_change_filter(struct qlcnic_adapter *adapter,
- u64 *addr, u16 id)
+ u64 *addr, u16 vlan,
+ struct qlcnic_host_tx_ring *tx_ring)
{
- adapter->ahw->hw_ops->change_l2_filter(adapter, addr, id);
+ adapter->ahw->hw_ops->change_l2_filter(adapter, addr, vlan, tx_ring);
}
static inline int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 569d54ededec..a79d84f99102 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -2135,7 +2135,8 @@ int qlcnic_83xx_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
}
void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *adapter, u64 *addr,
- u16 vlan_id)
+ u16 vlan_id,
+ struct qlcnic_host_tx_ring *tx_ring)
{
u8 mac[ETH_ALEN];
memcpy(&mac, addr, ETH_ALEN);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
index b75a81246856..73fe2f64491d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
@@ -550,7 +550,8 @@ int qlcnic_83xx_wrt_reg_indirect(struct qlcnic_adapter *, ulong, u32);
int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *, u32);
int qlcnic_83xx_config_hw_lro(struct qlcnic_adapter *, int);
int qlcnic_83xx_config_rss(struct qlcnic_adapter *, int);
-void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *, u64 *, u16);
+void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *adapter, u64 *addr,
+ u16 vlan, struct qlcnic_host_tx_ring *ring);
int qlcnic_83xx_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info *);
int qlcnic_83xx_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *);
void qlcnic_83xx_initialize_nic(struct qlcnic_adapter *, int);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
index 4bb33af8e2b3..56a3bd9e37dc 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
@@ -173,7 +173,8 @@ int qlcnic_82xx_napi_add(struct qlcnic_adapter *adapter,
struct net_device *netdev);
void qlcnic_82xx_get_beacon_state(struct qlcnic_adapter *);
void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter,
- u64 *uaddr, u16 vlan_id);
+ u64 *uaddr, u16 vlan_id,
+ struct qlcnic_host_tx_ring *tx_ring);
int qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *,
struct ethtool_coalesce *);
int qlcnic_82xx_set_rx_coalesce(struct qlcnic_adapter *);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index 84dd83031a1b..9647578cbe6a 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -268,13 +268,12 @@ static void qlcnic_add_lb_filter(struct qlcnic_adapter *adapter,
}
void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr,
- u16 vlan_id)
+ u16 vlan_id, struct qlcnic_host_tx_ring *tx_ring)
{
struct cmd_desc_type0 *hwdesc;
struct qlcnic_nic_req *req;
struct qlcnic_mac_req *mac_req;
struct qlcnic_vlan_req *vlan_req;
- struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring;
u32 producer;
u64 word;
@@ -301,7 +300,8 @@ void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr,
static void qlcnic_send_filter(struct qlcnic_adapter *adapter,
struct cmd_desc_type0 *first_desc,
- struct sk_buff *skb)
+ struct sk_buff *skb,
+ struct qlcnic_host_tx_ring *tx_ring)
{
struct vlan_ethhdr *vh = (struct vlan_ethhdr *)(skb->data);
struct ethhdr *phdr = (struct ethhdr *)(skb->data);
@@ -335,7 +335,7 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter,
tmp_fil->vlan_id == vlan_id) {
if (jiffies > (QLCNIC_READD_AGE * HZ + tmp_fil->ftime))
qlcnic_change_filter(adapter, &src_addr,
- vlan_id);
+ vlan_id, tx_ring);
tmp_fil->ftime = jiffies;
return;
}
@@ -350,7 +350,7 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter,
if (!fil)
return;
- qlcnic_change_filter(adapter, &src_addr, vlan_id);
+ qlcnic_change_filter(adapter, &src_addr, vlan_id, tx_ring);
fil->ftime = jiffies;
fil->vlan_id = vlan_id;
memcpy(fil->faddr, &src_addr, ETH_ALEN);
@@ -766,7 +766,7 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
}
if (adapter->drv_mac_learn)
- qlcnic_send_filter(adapter, first_desc, skb);
+ qlcnic_send_filter(adapter, first_desc, skb, tx_ring);
tx_ring->tx_stats.tx_bytes += skb->len;
tx_ring->tx_stats.xmit_called++;
--
2.14.1
next reply other threads:[~2018-09-27 1:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-26 19:41 Shahed Shaikh [this message]
2018-09-29 18:47 ` [PATCH net 1/1] qlcnic: fix Tx descriptor corruption on 82xx devices David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180926194110.28043-1-shahed.shaikh@cavium.com \
--to=shahed.shaikh@cavium.com \
--cc=Dept-GELinuxNICDev@cavium.com \
--cc=Manish.Chopra@cavium.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox