From: Eric Dumazet <edumazet@google.com>
To: "David S . Miller" <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>,
Eric Dumazet <edumazet@google.com>,
Michael Chan <michael.chan@broadcom.com>,
Aviad Krawczyk <aviad.krawczyk@huawei.com>,
Song Liu <songliubraving@fb.com>,
Douglas Miller <dougmill@linux.vnet.ibm.com>,
Yisen Zhuang <yisen.zhuang@huawei.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
Jason Wang <jasowang@redhat.com>,
Harish Patil <harish.patil@cavium.com>,
Manish Chopra <manish.chopra@cavium.com>,
Netanel Belgazal <netanel@amazon.com>,
Solarflare linux maintainers <linux-net-drivers@solarflare.com>,
Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Subject: [PATCH net 02/11] hinic: remove ndo_poll_controller
Date: Thu, 27 Sep 2018 09:31:52 -0700 [thread overview]
Message-ID: <20180927163201.56609-3-edumazet@google.com> (raw)
In-Reply-To: <20180927163201.56609-1-edumazet@google.com>
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
hinic uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Note that hinic_netpoll() was incorrectly scheduling NAPI
on both RX and TX queues.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com>
---
.../net/ethernet/huawei/hinic/hinic_main.c | 20 -------------------
1 file changed, 20 deletions(-)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c
index 09e9da10b786549b6232d8069c4e45857b95fd8c..4a8f82938ed5b87c8da6b09e88e08d387c652f0c 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_main.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c
@@ -789,23 +789,6 @@ static void hinic_get_stats64(struct net_device *netdev,
stats->tx_errors = nic_tx_stats->tx_dropped;
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void hinic_netpoll(struct net_device *netdev)
-{
- struct hinic_dev *nic_dev = netdev_priv(netdev);
- int i, num_qps;
-
- num_qps = hinic_hwdev_num_qps(nic_dev->hwdev);
- for (i = 0; i < num_qps; i++) {
- struct hinic_txq *txq = &nic_dev->txqs[i];
- struct hinic_rxq *rxq = &nic_dev->rxqs[i];
-
- napi_schedule(&txq->napi);
- napi_schedule(&rxq->napi);
- }
-}
-#endif
-
static const struct net_device_ops hinic_netdev_ops = {
.ndo_open = hinic_open,
.ndo_stop = hinic_close,
@@ -818,9 +801,6 @@ static const struct net_device_ops hinic_netdev_ops = {
.ndo_start_xmit = hinic_xmit_frame,
.ndo_tx_timeout = hinic_tx_timeout,
.ndo_get_stats64 = hinic_get_stats64,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = hinic_netpoll,
-#endif
};
static void netdev_features_init(struct net_device *netdev)
--
2.19.0.605.g01d371f741-goog
next prev parent reply other threads:[~2018-09-27 22:51 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-27 16:31 [PATCH net 00/11] netpoll: second round of fixes Eric Dumazet
2018-09-27 16:31 ` [PATCH net 01/11] netpoll: do not test NAPI_STATE_SCHED in poll_one_napi() Eric Dumazet
2018-09-27 18:25 ` Michael Chan
2018-09-27 18:33 ` Song Liu
2018-09-27 16:31 ` Eric Dumazet [this message]
2018-09-27 16:31 ` [PATCH net 03/11] ehea: remove ndo_poll_controller Eric Dumazet
2018-09-27 16:31 ` [PATCH net 04/11] net: hns: " Eric Dumazet
2018-09-27 16:31 ` [PATCH net 05/11] virtio_net: " Eric Dumazet
2018-09-27 16:31 ` [PATCH net 06/11] qlcnic: " Eric Dumazet
2018-09-27 16:31 ` [PATCH net 07/11] qlogic: netxen: " Eric Dumazet
2018-09-27 16:31 ` [PATCH net 08/11] net: ena: " Eric Dumazet
2018-09-27 16:31 ` [PATCH net 09/11] sfc: " Eric Dumazet
2018-09-28 7:30 ` Bert Kenward
2018-09-27 16:32 ` [PATCH net 10/11] sfc-falcon: " Eric Dumazet
2018-09-28 7:30 ` Bert Kenward
2018-09-27 16:32 ` [PATCH net 11/11] ibmvnic: " Eric Dumazet
2018-09-28 18:14 ` [PATCH net 00/11] netpoll: second round of fixes David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180927163201.56609-3-edumazet@google.com \
--to=edumazet@google.com \
--cc=aviad.krawczyk@huawei.com \
--cc=davem@davemloft.net \
--cc=dougmill@linux.vnet.ibm.com \
--cc=harish.patil@cavium.com \
--cc=jasowang@redhat.com \
--cc=linux-net-drivers@solarflare.com \
--cc=manish.chopra@cavium.com \
--cc=michael.chan@broadcom.com \
--cc=mst@redhat.com \
--cc=netanel@amazon.com \
--cc=netdev@vger.kernel.org \
--cc=songliubraving@fb.com \
--cc=tlfalcon@linux.vnet.ibm.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox