[PATCH AUTOSEL 4.4 10/20] mac80211: fix miscounting of ttl-dropped frames

[PATCH AUTOSEL 4.4 10/20] mac80211: fix miscounting of ttl-dropped frames

[Sasha Levin]

From: Bob Copeland <me@bobcopeland.com>

[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ]

In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl'
counter when we decrement the ttl to zero.  For unicast frames
destined for other hosts, we stop processing the frame at that point.

For multicast frames, we do not rebroadcast it in this case, but we
do pass the frame up the stack to process it on this STA.  That
doesn't match the usual definition of "dropped," so don't count
those as such.

With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a
peer in a ttl=1 network no longer increments the counter rapidly.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 64f76f88f819..8c587f06414e 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2339,7 +2339,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 	skb_set_queue_mapping(skb, q);
 
 	if (!--mesh_hdr->ttl) {
-		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
+		if (!is_multicast_ether_addr(hdr->addr1))
+			IEEE80211_IFSTA_MESH_CTR_INC(ifmsh,
+						     dropped_frames_ttl);
 		goto out;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.4 11/20] libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()

[Sasha Levin]

From: Ilya Dryomov <idryomov@gmail.com>

[ Upstream commit 4aac9228d16458cedcfd90c7fb37211cf3653ac3 ]

con_fault() can transition the connection into STANDBY right after
ceph_con_keepalive() clears STANDBY in clear_standby():

    libceph user thread               ceph-msgr worker

ceph_con_keepalive()
  mutex_lock(&con->mutex)
  clear_standby(con)
  mutex_unlock(&con->mutex)
                                mutex_lock(&con->mutex)
                                con_fault()
                                  ...
                                  if KEEPALIVE_PENDING isn't set
                                    set state to STANDBY
                                  ...
                                mutex_unlock(&con->mutex)
  set KEEPALIVE_PENDING
  set WRITE_PENDING

This triggers warnings in clear_standby() when either ceph_con_send()
or ceph_con_keepalive() get to clearing STANDBY next time.

I don't see a reason to condition queue_con() call on the previous
value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING
into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING
could have been a non-atomic flag.

Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ceph/messenger.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index ad3c9e96a275..3e6897efe1eb 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -3181,9 +3181,10 @@ void ceph_con_keepalive(struct ceph_connection *con)
 	dout("con_keepalive %p\n", con);
 	mutex_lock(&con->mutex);
 	clear_standby(con);
+	con_flag_set(con, CON_FLAG_KEEPALIVE_PENDING);
 	mutex_unlock(&con->mutex);
-	if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
-	    con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
+
+	if (con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
 		queue_con(con);
 }
 EXPORT_SYMBOL(ceph_con_keepalive);
-- 
2.19.1

[PATCH AUTOSEL 4.4 14/20] net: altera_tse: fix connect_local_phy error path

[Sasha Levin]

From: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>

[ Upstream commit 17b42a20d7ca59377788c6a2409e77569570cc10 ]

The connect_local_phy should return NULL (not negative errno) on
error, since its caller expects it.

Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/altera/altera_tse_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index fe644823ceaf..bb51f124d8c7 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -716,8 +716,10 @@ static struct phy_device *connect_local_phy(struct net_device *dev)
 
 		phydev = phy_connect(dev, phy_id_fmt, &altera_tse_adjust_link,
 				     priv->phy_iface);
-		if (IS_ERR(phydev))
+		if (IS_ERR(phydev)) {
 			netdev_err(dev, "Could not attach to PHY\n");
+			phydev = NULL;
+		}
 
 	} else {
 		int ret;
-- 
2.19.1

[PATCH AUTOSEL 4.4 15/20] sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe

[Sasha Levin]

From: Edward Cree <ecree@solarflare.com>

[ Upstream commit 3366463513f544c12c6b88c13da4462ee9e7a1a1 ]

Use a bitmap to keep track of which partition types we've already seen;
 for duplicates, return -EEXIST from efx_ef10_mtd_probe_partition() and
 thus skip adding that partition.
Duplicate partitions occur because of the A/B backup scheme used by newer
 sfc NICs.  Prior to this patch they cause sysfs_warn_dup errors because
 they have the same name, causing us not to expose any MTDs at all.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 063aca17e698..79a1031c3ef7 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -4433,22 +4433,25 @@ static const struct efx_ef10_nvram_type_info efx_ef10_nvram_types[] = {
 	{ NVRAM_PARTITION_TYPE_LICENSE,		   0,    0, "sfc_license" },
 	{ NVRAM_PARTITION_TYPE_PHY_MIN,		   0xff, 0, "sfc_phy_fw" },
 };
+#define EF10_NVRAM_PARTITION_COUNT	ARRAY_SIZE(efx_ef10_nvram_types)
 
 static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
 					struct efx_mcdi_mtd_partition *part,
-					unsigned int type)
+					unsigned int type,
+					unsigned long *found)
 {
 	MCDI_DECLARE_BUF(inbuf, MC_CMD_NVRAM_METADATA_IN_LEN);
 	MCDI_DECLARE_BUF(outbuf, MC_CMD_NVRAM_METADATA_OUT_LENMAX);
 	const struct efx_ef10_nvram_type_info *info;
 	size_t size, erase_size, outlen;
+	int type_idx = 0;
 	bool protected;
 	int rc;
 
-	for (info = efx_ef10_nvram_types; ; info++) {
-		if (info ==
-		    efx_ef10_nvram_types + ARRAY_SIZE(efx_ef10_nvram_types))
+	for (type_idx = 0; ; type_idx++) {
+		if (type_idx == EF10_NVRAM_PARTITION_COUNT)
 			return -ENODEV;
+		info = efx_ef10_nvram_types + type_idx;
 		if ((type & ~info->type_mask) == info->type)
 			break;
 	}
@@ -4461,6 +4464,13 @@ static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
 	if (protected)
 		return -ENODEV; /* hide it */
 
+	/* If we've already exposed a partition of this type, hide this
+	 * duplicate.  All operations on MTDs are keyed by the type anyway,
+	 * so we can't act on the duplicate.
+	 */
+	if (__test_and_set_bit(type_idx, found))
+		return -EEXIST;
+
 	part->nvram_type = type;
 
 	MCDI_SET_DWORD(inbuf, NVRAM_METADATA_IN_TYPE, type);
@@ -4489,6 +4499,7 @@ static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
 static int efx_ef10_mtd_probe(struct efx_nic *efx)
 {
 	MCDI_DECLARE_BUF(outbuf, MC_CMD_NVRAM_PARTITIONS_OUT_LENMAX);
+	DECLARE_BITMAP(found, EF10_NVRAM_PARTITION_COUNT);
 	struct efx_mcdi_mtd_partition *parts;
 	size_t outlen, n_parts_total, i, n_parts;
 	unsigned int type;
@@ -4517,11 +4528,13 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx)
 	for (i = 0; i < n_parts_total; i++) {
 		type = MCDI_ARRAY_DWORD(outbuf, NVRAM_PARTITIONS_OUT_TYPE_ID,
 					i);
-		rc = efx_ef10_mtd_probe_partition(efx, &parts[n_parts], type);
-		if (rc == 0)
-			n_parts++;
-		else if (rc != -ENODEV)
+		rc = efx_ef10_mtd_probe_partition(efx, &parts[n_parts], type,
+						  found);
+		if (rc == -EEXIST || rc == -ENODEV)
+			continue;
+		if (rc)
 			goto fail;
+		n_parts++;
 	}
 
 	rc = efx_mtd_add(efx, &parts[0].common, n_parts, sizeof(*parts));
-- 
2.19.1

[PATCH AUTOSEL 4.4 16/20] ax25: fix possible use-after-free

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 63530aba7826a0f8e129874df9c4d264f9db3f9e ]

syzbot found that ax25 routes where not properly protected
against concurrent use [1].

In this particular report the bug happened while
copying ax25->digipeat.

Fix this problem by making sure we call ax25_get_route()
while ax25_route_lock is held, so that no modification
could happen while using the route.

The current two ax25_get_route() callers do not sleep,
so this change should be fine.

Once we do that, ax25_get_route() no longer needs to
grab a reference on the found route.

[1]
ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113
Read of size 66 at addr ffff888066641a80 by task syz-executor2/531

ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1db/0x2d0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x24/0x50 mm/kasan/common.c:130
 memcpy include/linux/string.h:352 [inline]
 kmemdup+0x42/0x60 mm/util.c:113
 kmemdup include/linux/string.h:425 [inline]
 ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424
 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224
 __sys_connect+0x357/0x490 net/socket.c:1664
 __do_sys_connect net/socket.c:1675 [inline]
 __se_sys_connect net/socket.c:1672 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1672
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458099
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099
RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4
R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff

Allocated by task 526:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:496 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
 kmalloc include/linux/slab.h:545 [inline]
 ax25_rt_add net/ax25/ax25_route.c:95 [inline]
 ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233
 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
 sock_do_ioctl+0xe2/0x400 net/socket.c:950
 sock_ioctl+0x32f/0x6c0 net/socket.c:1074
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
Freed by task 550:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
 __cache_free mm/slab.c:3487 [inline]
 kfree+0xcf/0x230 mm/slab.c:3806
 ax25_rt_add net/ax25/ax25_route.c:92 [inline]
 ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233
 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
 sock_do_ioctl+0xe2/0x400 net/socket.c:950
 sock_ioctl+0x32f/0x6c0 net/socket.c:1074
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888066641a80
 which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
 96-byte region [ffff888066641a80, ffff888066641ae0)
The buggy address belongs to the page:
page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0
flags: 0x1fffc0000000200(slab)
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0
raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc
>ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                   ^
 ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ax25.h    | 12 ++++++++++++
 net/ax25/ax25_ip.c    |  4 ++--
 net/ax25/ax25_route.c | 19 ++++++++-----------
 3 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/include/net/ax25.h b/include/net/ax25.h
index e602f8177ebf..b507ce2b1952 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -199,6 +199,18 @@ static inline void ax25_hold_route(ax25_route *ax25_rt)
 
 void __ax25_put_route(ax25_route *ax25_rt);
 
+extern rwlock_t ax25_route_lock;
+
+static inline void ax25_route_lock_use(void)
+{
+	read_lock(&ax25_route_lock);
+}
+
+static inline void ax25_route_lock_unuse(void)
+{
+	read_unlock(&ax25_route_lock);
+}
+
 static inline void ax25_put_route(ax25_route *ax25_rt)
 {
 	if (atomic_dec_and_test(&ax25_rt->refcount))
diff --git a/net/ax25/ax25_ip.c b/net/ax25/ax25_ip.c
index 2fa3be965101..cd9a24e5b97a 100644
--- a/net/ax25/ax25_ip.c
+++ b/net/ax25/ax25_ip.c
@@ -114,6 +114,7 @@ netdev_tx_t ax25_ip_xmit(struct sk_buff *skb)
 	dst = (ax25_address *)(bp + 1);
 	src = (ax25_address *)(bp + 8);
 
+	ax25_route_lock_use();
 	route = ax25_get_route(dst, NULL);
 	if (route) {
 		digipeat = route->digipeat;
@@ -206,9 +207,8 @@ netdev_tx_t ax25_ip_xmit(struct sk_buff *skb)
 	ax25_queue_xmit(skb, dev);
 
 put:
-	if (route)
-		ax25_put_route(route);
 
+	ax25_route_lock_unuse();
 	return NETDEV_TX_OK;
 }
 
diff --git a/net/ax25/ax25_route.c b/net/ax25/ax25_route.c
index d39097737e38..149f82bd83fd 100644
--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -40,7 +40,7 @@
 #include <linux/export.h>
 
 static ax25_route *ax25_route_list;
-static DEFINE_RWLOCK(ax25_route_lock);
+DEFINE_RWLOCK(ax25_route_lock);
 
 void ax25_rt_device_down(struct net_device *dev)
 {
@@ -349,6 +349,7 @@ const struct file_operations ax25_route_fops = {
  *	Find AX.25 route
  *
  *	Only routes with a reference count of zero can be destroyed.
+ *	Must be called with ax25_route_lock read locked.
  */
 ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev)
 {
@@ -356,7 +357,6 @@ ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev)
 	ax25_route *ax25_def_rt = NULL;
 	ax25_route *ax25_rt;
 
-	read_lock(&ax25_route_lock);
 	/*
 	 *	Bind to the physical interface we heard them on, or the default
 	 *	route if none is found;
@@ -379,11 +379,6 @@ ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev)
 	if (ax25_spe_rt != NULL)
 		ax25_rt = ax25_spe_rt;
 
-	if (ax25_rt != NULL)
-		ax25_hold_route(ax25_rt);
-
-	read_unlock(&ax25_route_lock);
-
 	return ax25_rt;
 }
 
@@ -414,9 +409,12 @@ int ax25_rt_autobind(ax25_cb *ax25, ax25_address *addr)
 	ax25_route *ax25_rt;
 	int err = 0;
 
-	if ((ax25_rt = ax25_get_route(addr, NULL)) == NULL)
+	ax25_route_lock_use();
+	ax25_rt = ax25_get_route(addr, NULL);
+	if (!ax25_rt) {
+		ax25_route_lock_unuse();
 		return -EHOSTUNREACH;
-
+	}
 	if ((ax25->ax25_dev = ax25_dev_ax25dev(ax25_rt->dev)) == NULL) {
 		err = -EHOSTUNREACH;
 		goto put;
@@ -451,8 +449,7 @@ int ax25_rt_autobind(ax25_cb *ax25, ax25_address *addr)
 	}
 
 put:
-	ax25_put_route(ax25_rt);
-
+	ax25_route_lock_unuse();
 	return err;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.4 17/20] ibmveth: Do not process frames after calling napi_reschedule

[Sasha Levin]

From: Thomas Falcon <tlfalcon@linux.ibm.com>

[ Upstream commit e95d22c69b2c130ccce257b84daf283fd82d611e ]

The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmveth.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 61a9ab4fe047..70b3253e7ed5 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1238,7 +1238,6 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
 	struct iphdr *iph;
 	u16 mss = 0;
 
-restart_poll:
 	while (frames_processed < budget) {
 		if (!ibmveth_rxq_pending_buffer(adapter))
 			break;
@@ -1336,7 +1335,6 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
 		    napi_reschedule(napi)) {
 			lpar_rc = h_vio_signal(adapter->vdev->unit_address,
 					       VIO_IRQ_DISABLE);
-			goto restart_poll;
 		}
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.4 18/20] mac80211: don't initiate TDLS connection if station is not associated to AP

[Sasha Levin]

From: Balaji Pothunoori <bpothuno@codeaurora.org>

[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ]

Following call trace is observed while adding TDLS peer entry in driver
during TDLS setup.

Call Trace:
[<c1301476>] dump_stack+0x47/0x61
[<c10537d2>] __warn+0xe2/0x100
[<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211]
[<c1053895>] warn_slowpath_null+0x25/0x30
[<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211]
[<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211]
[<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211]
[<c1876fe3>] nl80211_new_station+0x273/0x420
[<c170f6d9>] genl_rcv_msg+0x219/0x3c0
[<c170f4c0>] ? genl_rcv+0x30/0x30
[<c170ee7e>] netlink_rcv_skb+0x8e/0xb0
[<c170f4ac>] genl_rcv+0x1c/0x30
[<c170e8aa>] netlink_unicast+0x13a/0x1d0
[<c170ec18>] netlink_sendmsg+0x2d8/0x390
[<c16c5acd>] sock_sendmsg+0x2d/0x40
[<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0

Fixing this by allowing TDLS setup request only when we have completed
association.

Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/cfg.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 67348d8ac35d..7349bf26ae7b 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1228,6 +1228,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 	if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
 		sta->sta.tdls = true;
 
+	if (sta->sta.tdls && sdata->vif.type == NL80211_IFTYPE_STATION &&
+	    !sdata->u.mgd.associated)
+		return -EINVAL;
+
 	err = sta_apply_parameters(local, sta, params);
 	if (err) {
 		sta_info_free(local, sta);
-- 
2.19.1

[PATCH AUTOSEL 4.4 19/20] cfg80211: extend range deviation for DMG

[Sasha Levin]

From: Chaitanya Tata <chaitanya.tata@bluwirelesstechnology.com>

[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ]

Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/reg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 50dffd183cc6..429abf421906 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -780,7 +780,7 @@ static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range,
  * definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"),
  * however it is safe for now to assume that a frequency rule should not be
  * part of a frequency's band if the start freq or end freq are off by more
- * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the
+ * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 20 GHz for the
  * 60 GHz band.
  * This resolution can be lowered and should be considered as we add
  * regulatory rule support for other "bands".
@@ -795,7 +795,7 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
 	 * with the Channel starting frequency above 45 GHz.
 	 */
 	u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ?
-			10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
+			20 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
 	if (abs(freq_khz - freq_range->start_freq_khz) <= limit)
 		return true;
 	if (abs(freq_khz - freq_range->end_freq_khz) <= limit)
-- 
2.19.1