Netdev List
 help / color / mirror / Atom feed
From: Vivien Didelot <vivien.didelot@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, f.fainelli@gmail.com, andrew@lunn.ch,
	Vivien Didelot <vivien.didelot@gmail.com>
Subject: [PATCH net-next 4/7] net: dsa: mv88e6xxx: wait for AVB Busy bit
Date: Fri,  9 Aug 2019 18:47:56 -0400	[thread overview]
Message-ID: <20190809224759.5743-5-vivien.didelot@gmail.com> (raw)
In-Reply-To: <20190809224759.5743-1-vivien.didelot@gmail.com>

The AVB is not an indirect table using an Update bit, but a unit using
a Busy bit. This means that we must ensure that this bit is cleared
before setting it and wait until it gets cleared again after writing
an operation. Reflect that.

Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
---
 drivers/net/dsa/mv88e6xxx/global2_avb.c | 29 +++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/global2_avb.c b/drivers/net/dsa/mv88e6xxx/global2_avb.c
index 116b8cf5a6e3..657783e043ff 100644
--- a/drivers/net/dsa/mv88e6xxx/global2_avb.c
+++ b/drivers/net/dsa/mv88e6xxx/global2_avb.c
@@ -11,6 +11,8 @@
  *	Brandon Streiff <brandon.streiff@ni.com>
  */
 
+#include <linux/bitfield.h>
+
 #include "global2.h"
 
 /* Offset 0x16: AVB Command Register
@@ -27,17 +29,33 @@
 /* mv88e6xxx_g2_avb_read -- Read one or multiple 16-bit words.
  * The hardware supports snapshotting up to four contiguous registers.
  */
+static int mv88e6xxx_g2_avb_wait(struct mv88e6xxx_chip *chip)
+{
+	int bit = __bf_shf(MV88E6352_G2_AVB_CMD_BUSY);
+
+	return mv88e6xxx_g2_wait_bit(chip, MV88E6352_G2_AVB_CMD, bit, 0);
+}
+
 static int mv88e6xxx_g2_avb_read(struct mv88e6xxx_chip *chip, u16 readop,
 				 u16 *data, int len)
 {
 	int err;
 	int i;
 
+	err = mv88e6xxx_g2_avb_wait(chip);
+	if (err)
+		return err;
+
 	/* Hardware can only snapshot four words. */
 	if (len > 4)
 		return -E2BIG;
 
-	err = mv88e6xxx_g2_update(chip, MV88E6352_G2_AVB_CMD, readop);
+	err = mv88e6xxx_g2_write(chip, MV88E6352_G2_AVB_CMD,
+				 MV88E6352_G2_AVB_CMD_BUSY | readop);
+	if (err)
+		return err;
+
+	err = mv88e6xxx_g2_avb_wait(chip);
 	if (err)
 		return err;
 
@@ -57,11 +75,18 @@ static int mv88e6xxx_g2_avb_write(struct mv88e6xxx_chip *chip, u16 writeop,
 {
 	int err;
 
+	err = mv88e6xxx_g2_avb_wait(chip);
+	if (err)
+		return err;
+
 	err = mv88e6xxx_g2_write(chip, MV88E6352_G2_AVB_DATA, data);
 	if (err)
 		return err;
 
-	return mv88e6xxx_g2_update(chip, MV88E6352_G2_AVB_CMD, writeop);
+	err = mv88e6xxx_g2_write(chip, MV88E6352_G2_AVB_CMD,
+				 MV88E6352_G2_AVB_CMD_BUSY | writeop);
+
+	return mv88e6xxx_g2_avb_wait(chip);
 }
 
 static int mv88e6352_g2_avb_port_ptp_read(struct mv88e6xxx_chip *chip,
-- 
2.22.0


  parent reply	other threads:[~2019-08-09 22:50 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09 22:47 [PATCH net-next 0/7] net: dsa: mv88e6xxx: prepare Wait Bit operation Vivien Didelot
2019-08-09 22:47 ` [PATCH net-next 1/7] net: dsa: mv88e6xxx: wait for 88E6185 PPU disabled Vivien Didelot
2019-08-09 22:47 ` [PATCH net-next 2/7] net: dsa: mv88e6xxx: introduce wait mask routine Vivien Didelot
2019-08-09 22:47 ` [PATCH net-next 3/7] net: dsa: mv88e6xxx: introduce wait bit routine Vivien Didelot
2019-08-09 22:47 ` Vivien Didelot [this message]
2019-08-09 22:47 ` [PATCH net-next 5/7] net: dsa: mv88e6xxx: remove wait and update routines Vivien Didelot
2019-08-09 22:47 ` [PATCH net-next 6/7] net: dsa: mv88e6xxx: fix SMI bit checking Vivien Didelot
2019-08-09 22:47 ` [PATCH net-next 7/7] net: dsa: mv88e6xxx: add delay in direct SMI wait Vivien Didelot
2019-08-12  4:27 ` [PATCH net-next 0/7] net: dsa: mv88e6xxx: prepare Wait Bit operation David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809224759.5743-5-vivien.didelot@gmail.com \
    --to=vivien.didelot@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox