From: "Bjørn Mork" <bjorn@mork.no>
To: netdev@vger.kernel.org
Cc: "Oliver Neukum" <oliver@neukum.org>,
linux-usb@vger.kernel.org, "Lars Melin" <larsm17@gmail.com>,
"Bjørn Mork" <bjorn@mork.no>
Subject: [PATCH net,stable] cdc_ether: fix rndis support for Mediatek based smartphones
Date: Thu, 12 Sep 2019 10:42:00 +0200 [thread overview]
Message-ID: <20190912084200.6359-1-bjorn@mork.no> (raw)
A Mediatek based smartphone owner reports problems with USB
tethering in Linux. The verbose USB listing shows a rndis_host
interface pair (e0/01/03 + 10/00/00), but the driver fails to
bind with
[ 355.960428] usb 1-4: bad CDC descriptors
The problem is a failsafe test intended to filter out ACM serial
functions using the same 02/02/ff class/subclass/protocol as RNDIS.
The serial functions are recognized by their non-zero bmCapabilities.
No RNDIS function with non-zero bmCapabilities were known at the time
this failsafe was added. But it turns out that some Wireless class
RNDIS functions are using the bmCapabilities field. These functions
are uniquely identified as RNDIS by their class/subclass/protocol, so
the failing test can safely be disabled. The same applies to the two
types of Misc class RNDIS functions.
Applying the failsafe to Communication class functions only retains
the original functionality, and fixes the problem for the Mediatek based
smartphone.
Tow examples of CDC functional descriptors with non-zero bmCapabilities
from Wireless class RNDIS functions are:
0e8d:000a Mediatek Crosscall Spider X5 3G Phone
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x0f
connection notifications
sends break
line coding and serial state
get/set/clear comm features
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
and
19d2:1023 ZTE K4201-z
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC Union:
bMasterInterface 0
bSlaveInterface 1
The Mediatek example is believed to apply to most smartphones with
Mediatek firmware. The ZTE example is most likely also part of a larger
family of devices/firmwares.
Suggested-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
---
drivers/net/usb/cdc_ether.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 8458e88c18e9..32f53de5b1fe 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -206,7 +206,15 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
goto bad_desc;
}
skip:
- if (rndis && header.usb_cdc_acm_descriptor &&
+ /* Communcation class functions with bmCapabilities are not
+ * RNDIS. But some Wireless class RNDIS functions use
+ * bmCapabilities for their own purpose. The failsafe is
+ * therefore applied only to Communication class RNDIS
+ * functions. The rndis test is redundant, but a cheap
+ * optimization.
+ */
+ if (rndis && is_rndis(&intf->cur_altsetting->desc) &&
+ header.usb_cdc_acm_descriptor &&
header.usb_cdc_acm_descriptor->bmCapabilities) {
dev_dbg(&intf->dev,
"ACM capabilities %02x, not really RNDIS?\n",
--
2.20.1
next reply other threads:[~2019-09-12 8:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-12 8:42 Bjørn Mork [this message]
2019-09-13 20:09 ` [PATCH net,stable] cdc_ether: fix rndis support for Mediatek based smartphones David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190912084200.6359-1-bjorn@mork.no \
--to=bjorn@mork.no \
--cc=larsm17@gmail.com \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=oliver@neukum.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox