From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Brett Creeley <brett.creeley@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
Andrew Bowers <andrewx.bowers@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 08/15] ice: Refactor removal of VLAN promiscuous rules
Date: Wed, 20 Nov 2019 23:46:05 -0800 [thread overview]
Message-ID: <20191121074612.3055661-9-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <20191121074612.3055661-1-jeffrey.t.kirsher@intel.com>
From: Brett Creeley <brett.creeley@intel.com>
Currently ice_clear_vsi_promisc() detects if the VLAN ID sent is not 0
and sets the recipe_id to ICE_SW_LKUP_PROMISC_VLAN in that case and
ICE_SW_LKUP_PROMISC if the VLAN_ID is 0. However this doesn't allow VLAN
0 promiscuous rules to be removed, but they can be added. Fix this by
checking if the promisc_mask contains ICE_PROMISC_VLAN_RX or
ICE_PROMISC_VLAN_TX. This change was made to match what is being done
for ice_set_vsi_promisc().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ice/ice_switch.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index 77d211ea3aae..b5a53f862a83 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -2428,7 +2428,7 @@ ice_clear_vsi_promisc(struct ice_hw *hw, u16 vsi_handle, u8 promisc_mask,
if (!ice_is_vsi_valid(hw, vsi_handle))
return ICE_ERR_PARAM;
- if (vid)
+ if (promisc_mask & (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX))
recipe_id = ICE_SW_LKUP_PROMISC_VLAN;
else
recipe_id = ICE_SW_LKUP_PROMISC;
@@ -2440,13 +2440,18 @@ ice_clear_vsi_promisc(struct ice_hw *hw, u16 vsi_handle, u8 promisc_mask,
mutex_lock(rule_lock);
list_for_each_entry(itr, rule_head, list_entry) {
+ struct ice_fltr_info *fltr_info;
u8 fltr_promisc_mask = 0;
if (!ice_vsi_uses_fltr(itr, vsi_handle))
continue;
+ fltr_info = &itr->fltr_info;
+
+ if (recipe_id == ICE_SW_LKUP_PROMISC_VLAN &&
+ vid != fltr_info->l_data.mac_vlan.vlan_id)
+ continue;
- fltr_promisc_mask |=
- ice_determine_promisc_mask(&itr->fltr_info);
+ fltr_promisc_mask |= ice_determine_promisc_mask(fltr_info);
/* Skip if filter is not completely specified by given mask */
if (fltr_promisc_mask & ~promisc_mask)
@@ -2454,7 +2459,7 @@ ice_clear_vsi_promisc(struct ice_hw *hw, u16 vsi_handle, u8 promisc_mask,
status = ice_add_entry_to_vsi_fltr_list(hw, vsi_handle,
&remove_list_head,
- &itr->fltr_info);
+ fltr_info);
if (status) {
mutex_unlock(rule_lock);
goto free_fltr_list;
--
2.23.0
next prev parent reply other threads:[~2019-11-21 7:46 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-21 7:45 [net-next 00/15][pull request] 100GbE Intel Wired LAN Driver Updates 2019-11-20 Jeff Kirsher
2019-11-21 7:45 ` [net-next 01/15] ice: Store number of functions for the device Jeff Kirsher
2019-11-21 7:45 ` [net-next 02/15] ice: Correct capabilities reporting of max TCs Jeff Kirsher
2019-11-21 7:46 ` [net-next 03/15] ice: Disallow VF VLAN opcodes if VLAN offloads disabled Jeff Kirsher
2019-11-21 7:46 ` [net-next 04/15] ice: Don't modify stripping for add/del VLANs on VF Jeff Kirsher
2019-11-21 7:46 ` [net-next 05/15] ice: fix stack leakage Jeff Kirsher
2019-11-21 22:25 ` Jakub Kicinski
2019-11-21 22:37 ` David Miller
2019-11-21 23:07 ` Jeff Kirsher
2019-11-21 7:46 ` [net-next 06/15] ice: Only disable VF state when freeing each VF resources Jeff Kirsher
2019-11-21 7:46 ` [net-next 07/15] ice: Fix setting coalesce to handle DCB configuration Jeff Kirsher
2019-11-21 7:46 ` Jeff Kirsher [this message]
2019-11-21 7:46 ` [net-next 09/15] ice: Do not use devm* functions for local uses Jeff Kirsher
2019-11-21 7:46 ` [net-next 10/15] ice: Add ice_pf_to_dev(pf) macro Jeff Kirsher
2019-11-21 7:46 ` [net-next 11/15] ice: add helpers for virtchnl Jeff Kirsher
2019-11-21 7:46 ` [net-next 12/15] ice: implement VF stats NDO Jeff Kirsher
2019-11-21 7:46 ` [net-next 13/15] ice: Implement ethtool ops for channels Jeff Kirsher
2019-11-21 22:42 ` Jakub Kicinski
2019-11-22 7:09 ` Jeff Kirsher
2019-11-22 17:44 ` Jakub Kicinski
2019-11-21 7:46 ` [net-next 14/15] ice: remove pointless NULL check of port_info Jeff Kirsher
2019-11-21 7:46 ` [net-next 15/15] ice: Update FW API minor version Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191121074612.3055661-9-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=andrewx.bowers@intel.com \
--cc=brett.creeley@intel.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox