* compat/devlink/mode is not present after installing linux-generic-hwe-18.04-edge
[not found] <10ad0e50-5753-cd42-e26d-d635a263084e@radiokomunikace.cz>
@ 2019-11-27 12:29 ` Koukal Petr
2019-11-27 13:42 ` Jiri Pirko
0 siblings, 1 reply; 2+ messages in thread
From: Koukal Petr @ 2019-11-27 12:29 UTC (permalink / raw)
To: netdev
Hi,
compat/devlink/mode is not present after installing
linux-generic-hwe-18.04-edge
After installing linux-generic-hwe-18.04-edge
cannot set "switchdev" for vif interface when configuring asap2 SRIOV
networking.
Previously, /sys/class/net/{device}/compat/devlink/mode was available.
Thank you very much for your help.
Petr
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: compat/devlink/mode is not present after installing linux-generic-hwe-18.04-edge
2019-11-27 12:29 ` compat/devlink/mode is not present after installing linux-generic-hwe-18.04-edge Koukal Petr
@ 2019-11-27 13:42 ` Jiri Pirko
0 siblings, 0 replies; 2+ messages in thread
From: Jiri Pirko @ 2019-11-27 13:42 UTC (permalink / raw)
To: Koukal Petr; +Cc: netdev
Wed, Nov 27, 2019 at 01:29:20PM CET, p.koukal@radiokomunikace.cz wrote:
>Hi,
>
>compat/devlink/mode is not present after installing
>linux-generic-hwe-18.04-edge
>
>After installing linux-generic-hwe-18.04-edge
>cannot set "switchdev" for vif interface when configuring asap2 SRIOV
>networking.
>
>Previously, /sys/class/net/{device}/compat/devlink/mode was available.
Hmm, this smells terribly like some out-of-tree thing. Are you sure you
didn't send this to a wrong mailing list?
>
>
>Thank you very much for your help.
>Petr
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-11-27 13:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <10ad0e50-5753-cd42-e26d-d635a263084e@radiokomunikace.cz>
2019-11-27 12:29 ` compat/devlink/mode is not present after installing linux-generic-hwe-18.04-edge Koukal Petr
2019-11-27 13:42 ` Jiri Pirko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox