From: Vladimir Oltean <olteanv@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: "Andrew Lunn" <andrew@lunn.ch>,
"Vivien Didelot" <vivien.didelot@gmail.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
netdev@vger.kernel.org, "Alvin Šipraga" <alsi@bang-olufsen.dk>,
"Mauri Sandberg" <sandberg@mailfence.com>,
"DENG Qingfang" <dqfext@gmail.com>
Subject: Re: [PATCH net-next 4/5 v2] net: dsa: rtl8366rb: Support flood control
Date: Tue, 31 Aug 2021 01:43:47 +0300 [thread overview]
Message-ID: <20210830224347.3ihtdgs56enz2ju3@skbuf> (raw)
In-Reply-To: <20210830214859.403100-5-linus.walleij@linaro.org>
On Mon, Aug 30, 2021 at 11:48:58PM +0200, Linus Walleij wrote:
> Now that we have implemented bridge flag handling we can easily
> support flood (storm) control as well so let's do it.
>
> Cc: Vladimir Oltean <olteanv@gmail.com>
> Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
> Cc: Mauri Sandberg <sandberg@mailfence.com>
> Cc: DENG Qingfang <dqfext@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v1->v2:
> - New patch
> ---
> drivers/net/dsa/rtl8366rb.c | 38 ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 37 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
> index 2cadd3e57e8b..4cb0e336ce6b 100644
> --- a/drivers/net/dsa/rtl8366rb.c
> +++ b/drivers/net/dsa/rtl8366rb.c
> @@ -149,6 +149,11 @@
>
> #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
>
> +#define RTL8366RB_STORM_BC_CTRL 0x03e0
> +#define RTL8366RB_STORM_MC_CTRL 0x03e1
> +#define RTL8366RB_STORM_UNDA_CTRL 0x03e2
> +#define RTL8366RB_STORM_UNMC_CTRL 0x03e3
> +
> /* LED control registers */
> #define RTL8366RB_LED_BLINKRATE_REG 0x0430
> #define RTL8366RB_LED_BLINKRATE_MASK 0x0007
> @@ -1158,7 +1163,8 @@ rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port,
> struct netlink_ext_ack *extack)
> {
> /* We support enabling/disabling learning */
> - if (flags.mask & ~(BR_LEARNING))
> + if (flags.mask & ~(BR_LEARNING | BR_BCAST_FLOOD |
> + BR_MCAST_FLOOD | BR_FLOOD))
Spaces instead of tabs here?
> return -EINVAL;
>
> return 0;
> @@ -1180,6 +1186,36 @@ rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port,
> return ret;
> }
>
> + if (flags.mask & BR_BCAST_FLOOD) {
> + ret = regmap_update_bits(smi->map, RTL8366RB_STORM_BC_CTRL,
> + BIT(port),
> + (flags.val & BR_BCAST_FLOOD) ? BIT(port) : 0);
> + if (ret)
> + return ret;
> + }
> +
> + if (flags.mask & BR_MCAST_FLOOD) {
> + ret = regmap_update_bits(smi->map, RTL8366RB_STORM_MC_CTRL,
> + BIT(port),
> + (flags.val & BR_MCAST_FLOOD) ? BIT(port) : 0);
> + if (ret)
> + return ret;
> + }
> +
> + /* Enable/disable both types of unicast floods */
> + if (flags.mask & BR_FLOOD) {
> + ret = regmap_update_bits(smi->map, RTL8366RB_STORM_UNDA_CTRL,
> + BIT(port),
> + (flags.val & BR_FLOOD) ? BIT(port) : 0);
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(smi->map, RTL8366RB_STORM_UNMC_CTRL,
> + BIT(port),
> + (flags.val & BR_FLOOD) ? BIT(port) : 0);
> + if (ret)
> + return ret;
UNDA and UNMC?
> + }
> +
> return 0;
> }
>
> --
> 2.31.1
>
next prev parent reply other threads:[~2021-08-30 22:43 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-30 21:48 [PATCH net-next 0/5 v2] RTL8366RB improvements Linus Walleij
2021-08-30 21:48 ` [PATCH net-next 1/5 v2] net: dsa: rtl8366rb: support bridge offloading Linus Walleij
2021-08-30 22:33 ` Vladimir Oltean
2021-08-30 23:24 ` Alvin Šipraga
2021-08-31 1:01 ` Florian Fainelli
2021-08-30 21:48 ` [PATCH net-next 2/5 v2] net: dsa: rtl8366: Drop custom VLAN set-up Linus Walleij
2021-08-30 22:35 ` Vladimir Oltean
2021-08-30 23:27 ` Alvin Šipraga
2021-08-31 1:02 ` Florian Fainelli
2021-08-30 21:48 ` [PATCH net-next 3/5 v2] net: dsa: rtl8366rb: Support disabling learning Linus Walleij
2021-08-30 22:40 ` Vladimir Oltean
2021-09-07 15:52 ` Linus Walleij
2021-09-08 21:09 ` Vladimir Oltean
2021-08-30 21:48 ` [PATCH net-next 4/5 v2] net: dsa: rtl8366rb: Support flood control Linus Walleij
2021-08-30 22:43 ` Vladimir Oltean [this message]
2021-08-30 23:42 ` Alvin Šipraga
2021-08-30 23:35 ` Alvin Šipraga
2021-08-31 1:04 ` Florian Fainelli
2021-08-30 21:48 ` [PATCH net-next 5/5 v2] net: dsa: rtl8366rb: Support fast aging Linus Walleij
2021-08-30 22:46 ` Vladimir Oltean
2021-09-07 17:48 ` Linus Walleij
2021-09-08 20:10 ` Vladimir Oltean
2021-09-10 13:59 ` Linus Walleij
2021-09-10 17:57 ` Vladimir Oltean
2021-08-31 0:24 ` Alvin Šipraga
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210830224347.3ihtdgs56enz2ju3@skbuf \
--to=olteanv@gmail.com \
--cc=alsi@bang-olufsen.dk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=dqfext@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=sandberg@mailfence.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox