Netdev List
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
	kernel@pengutronix.de,
	Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
	kernel test robot <lkp@intel.com>, Max Staudt <max@enpas.org>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH net-next 10/22] can: skb: move can_dropped_invalid_skb() and can_skb_headroom_valid() to skb.c
Date: Sat, 25 Jun 2022 14:03:23 +0200	[thread overview]
Message-ID: <20220625120335.324697-11-mkl@pengutronix.de> (raw)
In-Reply-To: <20220625120335.324697-1-mkl@pengutronix.de>

From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>

The functions can_dropped_invalid_skb() and can_skb_headroom_valid()
grew a lot over the years to a point which it does not make much sense
to have them defined as static inline in header files. Move those two
functions to the .c counterpart of skb.h.

can_skb_headroom_valid()'s only caller being
can_dropped_invalid_skb(), the declaration is removed from the
header. Only can_dropped_invalid_skb() gets its symbol exported.

While doing so, do a small cleanup: add brackets around the else block
in can_dropped_invalid_skb().

Link: https://lore.kernel.org/all/20220610143009.323579-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Max Staudt <max@enpas.org>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev/skb.c | 58 ++++++++++++++++++++++++++++++++++++++
 include/linux/can/skb.h   | 59 +--------------------------------------
 2 files changed, 59 insertions(+), 58 deletions(-)

diff --git a/drivers/net/can/dev/skb.c b/drivers/net/can/dev/skb.c
index a4208f125b76..dc9da76c0470 100644
--- a/drivers/net/can/dev/skb.c
+++ b/drivers/net/can/dev/skb.c
@@ -259,3 +259,61 @@ struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
 	return skb;
 }
 EXPORT_SYMBOL_GPL(alloc_can_err_skb);
+
+/* Check for outgoing skbs that have not been created by the CAN subsystem */
+static bool can_skb_headroom_valid(struct net_device *dev, struct sk_buff *skb)
+{
+	/* af_packet creates a headroom of HH_DATA_MOD bytes which is fine */
+	if (WARN_ON_ONCE(skb_headroom(skb) < sizeof(struct can_skb_priv)))
+		return false;
+
+	/* af_packet does not apply CAN skb specific settings */
+	if (skb->ip_summed == CHECKSUM_NONE) {
+		/* init headroom */
+		can_skb_prv(skb)->ifindex = dev->ifindex;
+		can_skb_prv(skb)->skbcnt = 0;
+
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		/* perform proper loopback on capable devices */
+		if (dev->flags & IFF_ECHO)
+			skb->pkt_type = PACKET_LOOPBACK;
+		else
+			skb->pkt_type = PACKET_HOST;
+
+		skb_reset_mac_header(skb);
+		skb_reset_network_header(skb);
+		skb_reset_transport_header(skb);
+	}
+
+	return true;
+}
+
+/* Drop a given socketbuffer if it does not contain a valid CAN frame. */
+bool can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb)
+{
+	const struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
+
+	if (skb->protocol == htons(ETH_P_CAN)) {
+		if (unlikely(skb->len != CAN_MTU ||
+			     cfd->len > CAN_MAX_DLEN))
+			goto inval_skb;
+	} else if (skb->protocol == htons(ETH_P_CANFD)) {
+		if (unlikely(skb->len != CANFD_MTU ||
+			     cfd->len > CANFD_MAX_DLEN))
+			goto inval_skb;
+	} else {
+		goto inval_skb;
+	}
+
+	if (!can_skb_headroom_valid(dev, skb))
+		goto inval_skb;
+
+	return false;
+
+inval_skb:
+	kfree_skb(skb);
+	dev->stats.tx_dropped++;
+	return true;
+}
+EXPORT_SYMBOL_GPL(can_dropped_invalid_skb);
diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h
index fdb22b00674a..182749e858b3 100644
--- a/include/linux/can/skb.h
+++ b/include/linux/can/skb.h
@@ -31,6 +31,7 @@ struct sk_buff *alloc_canfd_skb(struct net_device *dev,
 				struct canfd_frame **cfd);
 struct sk_buff *alloc_can_err_skb(struct net_device *dev,
 				  struct can_frame **cf);
+bool can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb);
 
 /*
  * The struct can_skb_priv is used to transport additional information along
@@ -96,64 +97,6 @@ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb)
 	return nskb;
 }
 
-/* Check for outgoing skbs that have not been created by the CAN subsystem */
-static inline bool can_skb_headroom_valid(struct net_device *dev,
-					  struct sk_buff *skb)
-{
-	/* af_packet creates a headroom of HH_DATA_MOD bytes which is fine */
-	if (WARN_ON_ONCE(skb_headroom(skb) < sizeof(struct can_skb_priv)))
-		return false;
-
-	/* af_packet does not apply CAN skb specific settings */
-	if (skb->ip_summed == CHECKSUM_NONE) {
-		/* init headroom */
-		can_skb_prv(skb)->ifindex = dev->ifindex;
-		can_skb_prv(skb)->skbcnt = 0;
-
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-		/* perform proper loopback on capable devices */
-		if (dev->flags & IFF_ECHO)
-			skb->pkt_type = PACKET_LOOPBACK;
-		else
-			skb->pkt_type = PACKET_HOST;
-
-		skb_reset_mac_header(skb);
-		skb_reset_network_header(skb);
-		skb_reset_transport_header(skb);
-	}
-
-	return true;
-}
-
-/* Drop a given socketbuffer if it does not contain a valid CAN frame. */
-static inline bool can_dropped_invalid_skb(struct net_device *dev,
-					  struct sk_buff *skb)
-{
-	const struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
-
-	if (skb->protocol == htons(ETH_P_CAN)) {
-		if (unlikely(skb->len != CAN_MTU ||
-			     cfd->len > CAN_MAX_DLEN))
-			goto inval_skb;
-	} else if (skb->protocol == htons(ETH_P_CANFD)) {
-		if (unlikely(skb->len != CANFD_MTU ||
-			     cfd->len > CANFD_MAX_DLEN))
-			goto inval_skb;
-	} else
-		goto inval_skb;
-
-	if (!can_skb_headroom_valid(dev, skb))
-		goto inval_skb;
-
-	return false;
-
-inval_skb:
-	kfree_skb(skb);
-	dev->stats.tx_dropped++;
-	return true;
-}
-
 static inline bool can_is_canfd_skb(const struct sk_buff *skb)
 {
 	/* the CAN specific type of skb is identified by its data length */
-- 
2.35.1



  parent reply	other threads:[~2022-06-25 12:06 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-25 12:03 [PATCH net-next 0/22] pull-request: can-next 2022-06-25 Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 01/22] can: xilinx_can: add Transmitter Delay Compensation (TDC) feature support Marc Kleine-Budde
2022-06-27 11:00   ` patchwork-bot+netdevbpf
2022-06-25 12:03 ` [PATCH net-next 02/22] can: xilinx_can: fix typo prescalar -> prescaler Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 03/22] can: m_can: " Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 04/22] can: netlink: allow configuring of fixed bit rates without need for do_set_bittiming callback Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 05/22] can: Kconfig: rename config symbol CAN_DEV into CAN_NETLINK Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 06/22] can: Kconfig: turn menu "CAN Device Drivers" into a menuconfig using CAN_DEV Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 07/22] can: bittiming: move bittiming calculation functions to calc_bittiming.c Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 08/22] can: Kconfig: add CONFIG_CAN_RX_OFFLOAD Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 09/22] net: Kconfig: move the CAN device menu to the "Device Drivers" section Marc Kleine-Budde
2022-06-25 12:03 ` Marc Kleine-Budde [this message]
2022-06-25 12:03 ` [PATCH net-next 11/22] can: skb: drop tx skb if in listen only mode Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 12/22] can: Break loopback loop on loopback documentation Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 13/22] can: etas_es58x: replace es58x_device::rx_max_packet_size by usb_maxpacket() Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 14/22] can: etas_es58x: fix signedness of USB RX and TX pipes Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 15/22] dt-bindings: can: mpfs: document the mpfs CAN controller Marc Kleine-Budde
2022-06-27 11:05   ` Conor.Dooley
2022-06-25 12:03 ` [PATCH net-next 16/22] riscv: dts: microchip: add mpfs's CAN controllers Marc Kleine-Budde
2022-06-27  7:12   ` Conor.Dooley
2022-06-27  7:30     ` Marc Kleine-Budde
2022-06-27 11:17       ` Conor.Dooley
2022-06-27 11:23         ` Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 17/22] can: netlink: allow configuring of fixed data bit rates without need for do_set_data_bittiming callback Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 18/22] can/esd_usb2: Rename esd_usb2.c to esd_usb.c Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 19/22] can/esd_usb: Add an entry to the MAINTAINERS file Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 20/22] can/esd_usb: Rename all terms USB2 to USB Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 21/22] can/esd_usb: Fixed some checkpatch.pl warnings Marc Kleine-Budde
2022-06-25 12:03 ` [PATCH net-next 22/22] can/esd_usb: Update to copyright, M_AUTHOR and M_DESCRIPTION Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220625120335.324697-11-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=lkp@intel.com \
    --cc=mailhol.vincent@wanadoo.fr \
    --cc=max@enpas.org \
    --cc=netdev@vger.kernel.org \
    --cc=socketcan@hartkopp.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox