Netdev List
 help / color / mirror / Atom feed
From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Claudiu Manoil <claudiu.manoil@nxp.com>
Subject: [PATCH net-next 08/12] net: enetc: move phylink_start/stop out of enetc_start/stop
Date: Wed, 18 Jan 2023 01:02:30 +0200	[thread overview]
Message-ID: <20230117230234.2950873-9-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20230117230234.2950873-1-vladimir.oltean@nxp.com>

We want to introduce a fast interface reconfiguration procedure, which
involves temporarily stopping the rings.

But we want enetc_start() and enetc_stop() to not restart PHY autoneg,
because that can take a few seconds until it completes again.

So we need part of enetc_start() and enetc_stop(), but not all of them.
Move phylink_start() right next to phylink_of_phy_connect(), and
phylink_stop() right next to phylink_disconnect_phy(), both still in
ndo_open() and ndo_stop().

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/ethernet/freescale/enetc/enetc.c | 26 ++++++++++----------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index 543ae8875bc9..014de5425b81 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -2322,8 +2322,11 @@ static int enetc_phylink_connect(struct net_device *ndev)
 	struct ethtool_eee edata;
 	int err;
 
-	if (!priv->phylink)
-		return 0; /* phy-less mode */
+	if (!priv->phylink) {
+		/* phy-less mode */
+		netif_carrier_on(ndev);
+		return 0;
+	}
 
 	err = phylink_of_phy_connect(priv->phylink, priv->dev->of_node, 0);
 	if (err) {
@@ -2335,6 +2338,8 @@ static int enetc_phylink_connect(struct net_device *ndev)
 	memset(&edata, 0, sizeof(struct ethtool_eee));
 	phylink_ethtool_set_eee(priv->phylink, &edata);
 
+	phylink_start(priv->phylink);
+
 	return 0;
 }
 
@@ -2376,11 +2381,6 @@ void enetc_start(struct net_device *ndev)
 		enable_irq(irq);
 	}
 
-	if (priv->phylink)
-		phylink_start(priv->phylink);
-	else
-		netif_carrier_on(ndev);
-
 	netif_tx_start_all_queues(ndev);
 }
 
@@ -2461,11 +2461,6 @@ void enetc_stop(struct net_device *ndev)
 		napi_disable(&priv->int_vector[i]->napi);
 	}
 
-	if (priv->phylink)
-		phylink_stop(priv->phylink);
-	else
-		netif_carrier_off(ndev);
-
 	enetc_clear_interrupts(priv);
 }
 
@@ -2476,8 +2471,13 @@ int enetc_close(struct net_device *ndev)
 	enetc_stop(ndev);
 	enetc_clear_bdrs(priv);
 
-	if (priv->phylink)
+	if (priv->phylink) {
+		phylink_stop(priv->phylink);
 		phylink_disconnect_phy(priv->phylink);
+	} else {
+		netif_carrier_off(ndev);
+	}
+
 	enetc_free_rxtx_rings(priv);
 
 	/* Avoids dangling pointers and also frees old resources */
-- 
2.34.1


  parent reply	other threads:[~2023-01-17 23:52 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-17 23:02 [PATCH net-next 00/12] ENETC BD ring cleanup Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 01/12] net: enetc: set next_to_clean/next_to_use just from enetc_setup_txbdr() Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 02/12] net: enetc: set up RX ring indices from enetc_setup_rxbdr() Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 03/12] net: enetc: create enetc_dma_free_bdr() Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 04/12] net: enetc: rx_swbd and tx_swbd are never NULL in enetc_free_rxtx_rings() Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 05/12] net: enetc: drop redundant enetc_free_tx_frame() call from enetc_free_txbdr() Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 06/12] net: enetc: bring "bool extended" to top-level in enetc_open() Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 07/12] net: enetc: split ring resource allocation from assignment Vladimir Oltean
2023-01-17 23:02 ` Vladimir Oltean [this message]
2023-01-17 23:02 ` [PATCH net-next 09/12] net: enetc: implement ring reconfiguration procedure for PTP RX timestamping Vladimir Oltean
2023-01-18 10:51   ` Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 10/12] net: enetc: rename "xdp" and "dev" in enetc_setup_bpf() Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 11/12] net: enetc: set up XDP program under enetc_reconfigure() Vladimir Oltean
2023-01-17 23:02 ` [PATCH net-next 12/12] net: enetc: prioritize ability to go down over packet processing Vladimir Oltean
2023-01-19  5:10 ` [PATCH net-next 00/12] ENETC BD ring cleanup patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230117230234.2950873-9-vladimir.oltean@nxp.com \
    --to=vladimir.oltean@nxp.com \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox