Netdev List
 help / color / mirror / Atom feed
From: Shenwei Wang <shenwei.wang@nxp.com>
To: Wei Fang <wei.fang@nxp.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Shenwei Wang <shenwei.wang@nxp.com>,
	Clark Wang <xiaoning.wang@nxp.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Alexei Starovoitov <ast@kernel.org>,
	Daniel Borkmann <daniel@iogearbox.net>,
	Jesper Dangaard Brouer <hawk@kernel.org>,
	John Fastabend <john.fastabend@gmail.com>,
	Alexander Lobakin <alexandr.lobakin@intel.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	imx@lists.linux.dev, Gagandeep Singh <g.singh@nxp.com>
Subject: [PATCH 1/1] net: fec: enable the XDP_TX support
Date: Tue,  2 May 2023 14:32:19 -0500	[thread overview]
Message-ID: <20230502193219.673637-1-shenwei.wang@nxp.com> (raw)

Enable the XDP_TX path and correct the return value of the xmit function.

If any individual frame cannot transmit due to lack of BD entries, the
function would still return success for sending all frames. This results
in prematurely indicating frames were sent when they were actually dropped.

The patch resolves the issue by ensureing the return value properly
indicates the actual number of frames successfully transmitted, rather than
potentially reporting success for all frames when some could not transmit.

Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 27 ++++++++++++++++-------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 160c1b3525f5..dfc1bcc9a8db 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -75,6 +75,10 @@
 
 static void set_multicast_list(struct net_device *ndev);
 static void fec_enet_itr_coal_set(struct net_device *ndev);
+static int fec_enet_xdp_xmit(struct net_device *dev,
+			     int num_frames,
+			     struct xdp_frame **frames,
+			     u32 flags);
 
 #define DRIVER_NAME	"fec"
 
@@ -1517,6 +1521,7 @@ fec_enet_run_xdp(struct fec_enet_private *fep, struct bpf_prog *prog,
 {
 	unsigned int sync, len = xdp->data_end - xdp->data;
 	u32 ret = FEC_ENET_XDP_PASS;
+	struct xdp_frame *xdp_frame;
 	struct page *page;
 	int err;
 	u32 act;
@@ -1545,11 +1550,12 @@ fec_enet_run_xdp(struct fec_enet_private *fep, struct bpf_prog *prog,
 		}
 		break;
 
-	default:
-		bpf_warn_invalid_xdp_action(fep->netdev, prog, act);
-		fallthrough;
-
 	case XDP_TX:
+		xdp_frame = xdp_convert_buff_to_frame(xdp);
+		ret = fec_enet_xdp_xmit(fep->netdev, 1, &xdp_frame, 0);
+		break;
+
+	default:
 		bpf_warn_invalid_xdp_action(fep->netdev, prog, act);
 		fallthrough;
 
@@ -3798,7 +3804,8 @@ static int fec_enet_txq_xmit_frame(struct fec_enet_private *fep,
 	entries_free = fec_enet_get_free_txdesc_num(txq);
 	if (entries_free < MAX_SKB_FRAGS + 1) {
 		netdev_err(fep->netdev, "NOT enough BD for SG!\n");
-		return NETDEV_TX_OK;
+		xdp_return_frame(frame);
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Fill in a Tx ring entry */
@@ -3856,6 +3863,7 @@ static int fec_enet_xdp_xmit(struct net_device *dev,
 	struct fec_enet_private *fep = netdev_priv(dev);
 	struct fec_enet_priv_tx_q *txq;
 	int cpu = smp_processor_id();
+	unsigned int sent_frames = 0;
 	struct netdev_queue *nq;
 	unsigned int queue;
 	int i;
@@ -3866,8 +3874,11 @@ static int fec_enet_xdp_xmit(struct net_device *dev,
 
 	__netif_tx_lock(nq, cpu);
 
-	for (i = 0; i < num_frames; i++)
-		fec_enet_txq_xmit_frame(fep, txq, frames[i]);
+	for (i = 0; i < num_frames; i++) {
+		if (fec_enet_txq_xmit_frame(fep, txq, frames[i]) != 0)
+			break;
+		sent_frames++;
+	}
 
 	/* Make sure the update to bdp and tx_skbuff are performed. */
 	wmb();
@@ -3877,7 +3888,7 @@ static int fec_enet_xdp_xmit(struct net_device *dev,
 
 	__netif_tx_unlock(nq);
 
-	return num_frames;
+	return sent_frames;
 }
 
 static const struct net_device_ops fec_netdev_ops = {
-- 
2.34.1


             reply	other threads:[~2023-05-02 19:32 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-02 19:32 Shenwei Wang [this message]
2023-05-02 20:16 ` [PATCH 1/1] net: fec: enable the XDP_TX support Andrew Lunn
2023-05-02 20:31 ` Horatiu Vultur

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230502193219.673637-1-shenwei.wang@nxp.com \
    --to=shenwei.wang@nxp.com \
    --cc=alexandr.lobakin@intel.com \
    --cc=ast@kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=g.singh@nxp.com \
    --cc=hawk@kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=john.fastabend@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=wei.fang@nxp.com \
    --cc=xiaoning.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox