From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: Shenwei Wang <shenwei.wang@nxp.com>
Cc: Wei Fang <wei.fang@nxp.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Clark Wang <xiaoning.wang@nxp.com>,
NXP Linux Team <linux-imx@nxp.com>,
Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Jesper Dangaard Brouer <hawk@kernel.org>,
John Fastabend <john.fastabend@gmail.com>,
Alexander Lobakin <alexandr.lobakin@intel.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<imx@lists.linux.dev>, Gagandeep Singh <g.singh@nxp.com>
Subject: Re: [PATCH 1/1] net: fec: enable the XDP_TX support
Date: Tue, 2 May 2023 22:31:17 +0200 [thread overview]
Message-ID: <20230502203117.2hwozz2azlvu6h4d@soft-dev3-1> (raw)
In-Reply-To: <20230502193219.673637-1-shenwei.wang@nxp.com>
The 05/02/2023 14:32, Shenwei Wang wrote:
Hi Shenwei,
>
> Enable the XDP_TX path and correct the return value of the xmit function.
I think this patch should be split in 2. One that adds support for
XDP_TX which needs to go in net-next, and one where you fix the
return value of the function 'fec_enect_xdp_xmit' which needs to
go in net.
Other than that it looks fine, just a small comment bellow.
>
> If any individual frame cannot transmit due to lack of BD entries, the
> function would still return success for sending all frames. This results
> in prematurely indicating frames were sent when they were actually dropped.
>
> The patch resolves the issue by ensureing the return value properly
> indicates the actual number of frames successfully transmitted, rather than
> potentially reporting success for all frames when some could not transmit.
>
> Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
> Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
> ---
> drivers/net/ethernet/freescale/fec_main.c | 27 ++++++++++++++++-------
> 1 file changed, 19 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index 160c1b3525f5..dfc1bcc9a8db 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -75,6 +75,10 @@
>
> static void set_multicast_list(struct net_device *ndev);
> static void fec_enet_itr_coal_set(struct net_device *ndev);
> +static int fec_enet_xdp_xmit(struct net_device *dev,
> + int num_frames,
> + struct xdp_frame **frames,
> + u32 flags);
Sometimes, I received comments at my patches not to have forward
declaration of the functions.
>
> #define DRIVER_NAME "fec"
>
> @@ -1517,6 +1521,7 @@ fec_enet_run_xdp(struct fec_enet_private *fep, struct bpf_prog *prog,
> {
> unsigned int sync, len = xdp->data_end - xdp->data;
> u32 ret = FEC_ENET_XDP_PASS;
> + struct xdp_frame *xdp_frame;
> struct page *page;
> int err;
> u32 act;
> @@ -1545,11 +1550,12 @@ fec_enet_run_xdp(struct fec_enet_private *fep, struct bpf_prog *prog,
> }
> break;
>
> - default:
> - bpf_warn_invalid_xdp_action(fep->netdev, prog, act);
> - fallthrough;
> -
> case XDP_TX:
> + xdp_frame = xdp_convert_buff_to_frame(xdp);
> + ret = fec_enet_xdp_xmit(fep->netdev, 1, &xdp_frame, 0);
> + break;
> +
> + default:
> bpf_warn_invalid_xdp_action(fep->netdev, prog, act);
> fallthrough;
>
> @@ -3798,7 +3804,8 @@ static int fec_enet_txq_xmit_frame(struct fec_enet_private *fep,
> entries_free = fec_enet_get_free_txdesc_num(txq);
> if (entries_free < MAX_SKB_FRAGS + 1) {
> netdev_err(fep->netdev, "NOT enough BD for SG!\n");
> - return NETDEV_TX_OK;
> + xdp_return_frame(frame);
>
> struct fec_enet_private *fep = netdev_priv(dev);
> struct fec_enet_priv_tx_q *txq;
> int cpu = smp_processor_id();
> + unsigned int sent_frames = 0;
> struct netdev_queue *nq;
> unsigned int queue;
> int i;
> @@ -3866,8 +3874,11 @@ static int fec_enet_xdp_xmit(struct net_device *dev,
>
> __netif_tx_lock(nq, cpu);
>
> - for (i = 0; i < num_frames; i++)
> - fec_enet_txq_xmit_frame(fep, txq, frames[i]);
> + for (i = 0; i < num_frames; i++) {
> + if (fec_enet_txq_xmit_frame(fep, txq, frames[i]) != 0)
> + break;
> + sent_frames++;
> + }
>
> /* Make sure the update to bdp and tx_skbuff are performed. */
> wmb();
> @@ -3877,7 +3888,7 @@ static int fec_enet_xdp_xmit(struct net_device *dev,
>
> __netif_tx_unlock(nq);
>
> - return num_frames;
> + return sent_frames;
> }
>
> static const struct net_device_ops fec_netdev_ops = {
> --
> 2.34.1
>
--
/Horatiu
prev parent reply other threads:[~2023-05-02 20:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-02 19:32 [PATCH 1/1] net: fec: enable the XDP_TX support Shenwei Wang
2023-05-02 20:16 ` Andrew Lunn
2023-05-02 20:31 ` Horatiu Vultur [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230502203117.2hwozz2azlvu6h4d@soft-dev3-1 \
--to=horatiu.vultur@microchip.com \
--cc=alexandr.lobakin@intel.com \
--cc=ast@kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=g.singh@nxp.com \
--cc=hawk@kernel.org \
--cc=imx@lists.linux.dev \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shenwei.wang@nxp.com \
--cc=wei.fang@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox