From: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
To: netdev@vger.kernel.org
Cc: vadim.fedorenko@linux.dev, jiri@resnulli.us, corbet@lwn.net,
davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
jesse.brandeburg@intel.com, anthony.l.nguyen@intel.com,
linux-doc@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Subject: [PATCH net-next v5 5/5] dpll: netlink/core: change pin frequency set behavior
Date: Wed, 11 Oct 2023 12:12:36 +0200 [thread overview]
Message-ID: <20231011101236.23160-6-arkadiusz.kubalewski@intel.com> (raw)
In-Reply-To: <20231011101236.23160-1-arkadiusz.kubalewski@intel.com>
Align the approach of pin frequency set behavior with the approach
introduced with pin phase adjust set.
Fail the request if any of devices did not registered the callback ops.
If callback op on any pin's registered device fails, return error and
rollback the value to previous one.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
---
drivers/dpll/dpll_netlink.c | 50 +++++++++++++++++++++++++++++++------
1 file changed, 42 insertions(+), 8 deletions(-)
diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c
index 09a6c2a1ea92..a6dc3997bf5c 100644
--- a/drivers/dpll/dpll_netlink.c
+++ b/drivers/dpll/dpll_netlink.c
@@ -615,8 +615,10 @@ static int
dpll_pin_freq_set(struct dpll_pin *pin, struct nlattr *a,
struct netlink_ext_ack *extack)
{
- u64 freq = nla_get_u64(a);
- struct dpll_pin_ref *ref;
+ u64 freq = nla_get_u64(a), old_freq;
+ struct dpll_pin_ref *ref, *failed;
+ const struct dpll_pin_ops *ops;
+ struct dpll_device *dpll;
unsigned long i;
int ret;
@@ -626,19 +628,51 @@ dpll_pin_freq_set(struct dpll_pin *pin, struct nlattr *a,
}
xa_for_each(&pin->dpll_refs, i, ref) {
- const struct dpll_pin_ops *ops = dpll_pin_ops(ref);
- struct dpll_device *dpll = ref->dpll;
-
- if (!ops->frequency_set)
+ ops = dpll_pin_ops(ref);
+ if (!ops->frequency_set || !ops->frequency_get) {
+ NL_SET_ERR_MSG(extack, "frequency set not supported by the device");
return -EOPNOTSUPP;
+ }
+ }
+ ref = dpll_xa_ref_dpll_first(&pin->dpll_refs);
+ ops = dpll_pin_ops(ref);
+ dpll = ref->dpll;
+ ret = ops->frequency_get(pin, dpll_pin_on_dpll_priv(dpll, pin), dpll,
+ dpll_priv(dpll), &old_freq, extack);
+ if (ret) {
+ NL_SET_ERR_MSG(extack, "unable to get old frequency value");
+ return ret;
+ }
+ if (freq == old_freq)
+ return 0;
+
+ xa_for_each(&pin->dpll_refs, i, ref) {
+ ops = dpll_pin_ops(ref);
+ dpll = ref->dpll;
ret = ops->frequency_set(pin, dpll_pin_on_dpll_priv(dpll, pin),
dpll, dpll_priv(dpll), freq, extack);
- if (ret)
- return ret;
+ if (ret) {
+ failed = ref;
+ NL_SET_ERR_MSG_FMT(extack, "frequency set failed for dpll_id:%u",
+ dpll->id);
+ goto rollback;
+ }
}
__dpll_pin_change_ntf(pin);
return 0;
+
+rollback:
+ xa_for_each(&pin->dpll_refs, i, ref) {
+ if (ref == failed)
+ break;
+ ops = dpll_pin_ops(ref);
+ dpll = ref->dpll;
+ if (ops->frequency_set(pin, dpll_pin_on_dpll_priv(dpll, pin),
+ dpll, dpll_priv(dpll), old_freq, extack))
+ NL_SET_ERR_MSG(extack, "set frequency rollback failed");
+ }
+ return ret;
}
static int
--
2.38.1
next prev parent reply other threads:[~2023-10-11 10:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-11 10:12 [PATCH net-next v5 0/5] dpll: add phase-offset and phase-adjust Arkadiusz Kubalewski
2023-10-11 10:12 ` [PATCH net-next v5 1/5] dpll: docs: add support for pin signal phase offset/adjust Arkadiusz Kubalewski
2023-10-11 10:12 ` [PATCH net-next v5 2/5] dpll: spec: add support for pin-dpll " Arkadiusz Kubalewski
2023-10-11 10:12 ` [PATCH net-next v5 3/5] dpll: netlink/core: " Arkadiusz Kubalewski
2023-10-11 10:12 ` [PATCH net-next v5 4/5] ice: dpll: implement phase related callbacks Arkadiusz Kubalewski
2023-10-11 10:12 ` Arkadiusz Kubalewski [this message]
2023-10-11 11:11 ` [PATCH net-next v5 0/5] dpll: add phase-offset and phase-adjust Jiri Pirko
2023-10-13 11:13 ` Vadim Fedorenko
2023-10-15 15:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231011101236.23160-6-arkadiusz.kubalewski@intel.com \
--to=arkadiusz.kubalewski@intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jesse.brandeburg@intel.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox