From: Justin Lai <justinlai0215@realtek.com>
To: <kuba@kernel.org>
Cc: <davem@davemloft.net>, <edumazet@google.com>, <pabeni@redhat.com>,
<linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
<andrew@lunn.ch>, <pkshih@realtek.com>, <larry.chiu@realtek.com>,
Justin Lai <justinlai0215@realtek.com>
Subject: [PATCH net-next v15 03/13] rtase: Implement the rtase_down function
Date: Fri, 5 Jan 2024 16:57:27 +0800 [thread overview]
Message-ID: <20240105085737.376885-4-justinlai0215@realtek.com> (raw)
In-Reply-To: <20240105085737.376885-1-justinlai0215@realtek.com>
Implement the rtase_down function to disable hardware setting
and interrupt and clear descriptor ring.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
---
.../net/ethernet/realtek/rtase/rtase_main.c | 148 ++++++++++++++++++
1 file changed, 148 insertions(+)
diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
index 3c9905f81f6e..9c7b27744d37 100644
--- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
+++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
@@ -190,6 +190,57 @@ static void rtase_free_desc(struct rtase_private *tp)
}
}
+static void rtase_unmap_tx_skb(struct pci_dev *pdev, u32 len,
+ struct tx_desc *desc)
+{
+ dma_unmap_single(&pdev->dev, le64_to_cpu(desc->addr), len,
+ DMA_TO_DEVICE);
+ desc->opts1 = cpu_to_le32(RTK_OPTS1_DEBUG_VALUE);
+ desc->opts2 = 0x00;
+ desc->addr = cpu_to_le64(RTK_MAGIC_NUMBER);
+}
+
+static void rtase_tx_clear_range(struct rtase_ring *ring, u32 start, u32 n)
+{
+ const struct rtase_private *tp = ring->ivec->tp;
+ struct tx_desc *desc_base = ring->desc;
+ struct net_device *dev = tp->dev;
+ u32 i;
+
+ for (i = 0; i < n; i++) {
+ u32 entry = (start + i) % NUM_DESC;
+ struct tx_desc *desc = desc_base + entry;
+ u32 len = ring->mis.len[entry];
+ struct sk_buff *skb;
+
+ if (len == 0)
+ continue;
+
+ rtase_unmap_tx_skb(tp->pdev, len, desc);
+ ring->mis.len[entry] = 0;
+ skb = ring->skbuff[entry];
+ if (!skb)
+ continue;
+
+ dev->stats.tx_dropped++;
+ dev_kfree_skb_any(skb);
+ ring->skbuff[entry] = NULL;
+ }
+}
+
+static void rtase_tx_clear(struct rtase_private *tp)
+{
+ struct rtase_ring *ring;
+ u16 i;
+
+ for (i = 0; i < tp->func_tx_queue_num; i++) {
+ ring = &tp->tx_ring[i];
+ rtase_tx_clear_range(ring, ring->dirty_idx, NUM_DESC);
+ ring->cur_idx = 0;
+ ring->dirty_idx = 0;
+ }
+}
+
static void rtase_mark_to_asic(union rx_desc *desc, u32 rx_buf_sz)
{
u32 eor = le32_to_cpu(desc->desc_cmd.opts1) & RING_END;
@@ -423,6 +474,77 @@ static void rtase_tally_counter_clear(const struct rtase_private *tp)
rtase_w32(tp, RTASE_DTCCR0, cmd | COUNTER_RESET);
}
+static void rtase_irq_dis_and_clear(const struct rtase_private *tp)
+{
+ const struct rtase_int_vector *ivec = &tp->int_vector[0];
+ u32 val1;
+ u16 val2;
+ u8 i;
+
+ rtase_w32(tp, ivec->imr_addr, 0);
+ val1 = rtase_r32(tp, ivec->isr_addr);
+ rtase_w32(tp, ivec->isr_addr, val1);
+
+ for (i = 1; i < tp->int_nums; i++) {
+ ivec = &tp->int_vector[i];
+ rtase_w16(tp, ivec->imr_addr, 0);
+ val2 = rtase_r16(tp, ivec->isr_addr);
+ rtase_w16(tp, ivec->isr_addr, val2);
+ }
+}
+
+static void rtase_poll_timeout(const struct rtase_private *tp, u32 cond,
+ u32 sleep_us, u64 timeout_us, u16 reg)
+{
+ int err;
+ u8 val;
+
+ err = read_poll_timeout(rtase_r8, val, val & cond, sleep_us, timeout_us,
+ false, tp, reg);
+
+ if (err == -ETIMEDOUT)
+ netdev_err(tp->dev, "poll reg 0x00%x timeout\n", reg);
+}
+
+static void rtase_nic_reset(const struct net_device *dev)
+{
+ const struct rtase_private *tp = netdev_priv(dev);
+ u16 rx_config;
+ u8 val;
+
+ rx_config = rtase_r16(tp, RTASE_RX_CONFIG_0);
+ rtase_w16(tp, RTASE_RX_CONFIG_0, rx_config & ~ACCEPT_MASK);
+
+ val = rtase_r8(tp, RTASE_MISC);
+ rtase_w8(tp, RTASE_MISC, val | RX_DV_GATE_EN);
+
+ val = rtase_r8(tp, RTASE_CHIP_CMD);
+ rtase_w8(tp, RTASE_CHIP_CMD, val | STOP_REQ);
+ mdelay(2);
+
+ rtase_poll_timeout(tp, STOP_REQ_DONE, 100, 150000, RTASE_CHIP_CMD);
+
+ rtase_poll_timeout(tp, TX_FIFO_EMPTY, 100, 100000, RTASE_FIFOR);
+
+ rtase_poll_timeout(tp, RX_FIFO_EMPTY, 100, 100000, RTASE_FIFOR);
+
+ val = rtase_r8(tp, RTASE_CHIP_CMD);
+ rtase_w8(tp, RTASE_CHIP_CMD, val & ~(TE | RE));
+ val = rtase_r8(tp, RTASE_CHIP_CMD);
+ rtase_w8(tp, RTASE_CHIP_CMD, val & ~STOP_REQ);
+
+ rtase_w16(tp, RTASE_RX_CONFIG_0, rx_config);
+}
+
+static void rtase_hw_reset(const struct net_device *dev)
+{
+ const struct rtase_private *tp = netdev_priv(dev);
+
+ rtase_irq_dis_and_clear(tp);
+
+ rtase_nic_reset(dev);
+}
+
static void rtase_nic_enable(const struct net_device *dev)
{
const struct rtase_private *tp = netdev_priv(dev);
@@ -524,6 +646,32 @@ static int rtase_open(struct net_device *dev)
return ret;
}
+static void rtase_down(struct net_device *dev)
+{
+ struct rtase_private *tp = netdev_priv(dev);
+ struct rtase_int_vector *ivec;
+ struct rtase_ring *ring, *tmp;
+ u32 i;
+
+ for (i = 0; i < tp->int_nums; i++) {
+ ivec = &tp->int_vector[i];
+ napi_disable(&ivec->napi);
+ list_for_each_entry_safe(ring, tmp, &ivec->ring_list, ring_entry) {
+ list_del(&ring->ring_entry);
+ }
+ }
+
+ netif_tx_disable(dev);
+
+ netif_carrier_off(dev);
+
+ rtase_hw_reset(dev);
+
+ rtase_tx_clear(tp);
+
+ rtase_rx_clear(tp);
+}
+
static int rtase_close(struct net_device *dev)
{
struct rtase_private *tp = netdev_priv(dev);
--
2.34.1
next prev parent reply other threads:[~2024-01-05 8:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-05 8:57 [PATCH net-next v15 00/13] Add Realtek automotive PCIe driver Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 01/13] rtase: Add pci table supported in this module Justin Lai
2024-01-05 9:33 ` Jiri Pirko
2024-01-05 8:57 ` [PATCH net-next v15 02/13] rtase: Implement the .ndo_open function Justin Lai
2024-01-05 8:57 ` Justin Lai [this message]
2024-01-05 8:57 ` [PATCH net-next v15 04/13] rtase: Implement the interrupt routine and rtase_poll Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 05/13] rtase: Implement hardware configuration function Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 06/13] rtase: Implement .ndo_start_xmit function Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 07/13] rtase: Implement a function to receive packets Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 08/13] rtase: Implement net_device_ops Justin Lai
2024-01-05 9:04 ` [PATCH net-next v15 00/13] Add Realtek automotive PCIe driver Justin Lai
-- strict thread matches above, loose matches on Subject: below --
2024-01-05 9:00 Justin Lai
2024-01-05 9:00 ` [PATCH net-next v15 03/13] rtase: Implement the rtase_down function Justin Lai
2024-01-05 8:52 [PATCH net-next v15 00/13] Add Realtek automotive PCIe driver Justin Lai
2024-01-05 8:52 ` [PATCH net-next v15 03/13] rtase: Implement the rtase_down function Justin Lai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240105085737.376885-4-justinlai0215@realtek.com \
--to=justinlai0215@realtek.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=larry.chiu@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox