From: Justin Lai <justinlai0215@realtek.com>
To: <kuba@kernel.org>
Cc: <davem@davemloft.net>, <edumazet@google.com>, <pabeni@redhat.com>,
<linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
<andrew@lunn.ch>, <pkshih@realtek.com>, <larry.chiu@realtek.com>,
Justin Lai <justinlai0215@realtek.com>
Subject: [PATCH net-next v15 06/13] rtase: Implement .ndo_start_xmit function
Date: Fri, 5 Jan 2024 16:57:30 +0800 [thread overview]
Message-ID: <20240105085737.376885-7-justinlai0215@realtek.com> (raw)
In-Reply-To: <20240105085737.376885-1-justinlai0215@realtek.com>
Implement .ndo_start_xmit function to fill the information of the packet
to be transmitted into the tx descriptor, and then the hardware will
transmit the packet using the information in the tx descriptor.
In addition, we also implemented the tx_handler function to enable the
tx descriptor to be reused.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
---
.../net/ethernet/realtek/rtase/rtase_main.c | 282 ++++++++++++++++++
1 file changed, 282 insertions(+)
diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
index 2337c3cf3cd0..9bbda3ad0c49 100644
--- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
+++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
@@ -252,6 +252,67 @@ static void rtase_mark_to_asic(union rx_desc *desc, u32 rx_buf_sz)
cpu_to_le32(DESC_OWN | eor | rx_buf_sz));
}
+static u32 rtase_tx_avail(struct rtase_ring *ring)
+{
+ return READ_ONCE(ring->dirty_idx) + NUM_DESC - READ_ONCE(ring->cur_idx);
+}
+
+static int tx_handler(struct rtase_ring *ring, int budget)
+{
+ const struct rtase_private *tp = ring->ivec->tp;
+ struct net_device *dev = tp->dev;
+ u32 dirty_tx, tx_left;
+ u32 bytes_compl = 0;
+ u32 pkts_compl = 0;
+ int workdone = 0;
+
+ dirty_tx = ring->dirty_idx;
+ tx_left = READ_ONCE(ring->cur_idx) - dirty_tx;
+
+ while (tx_left > 0) {
+ u32 entry = dirty_tx % NUM_DESC;
+ struct tx_desc *desc = ring->desc +
+ sizeof(struct tx_desc) * entry;
+ u32 status;
+
+ status = le32_to_cpu(desc->opts1);
+
+ if (status & DESC_OWN)
+ break;
+
+ rtase_unmap_tx_skb(tp->pdev, ring->mis.len[entry], desc);
+ ring->mis.len[entry] = 0;
+ if (ring->skbuff[entry]) {
+ pkts_compl++;
+ bytes_compl += ring->skbuff[entry]->len;
+ napi_consume_skb(ring->skbuff[entry], budget);
+ ring->skbuff[entry] = NULL;
+ }
+
+ dirty_tx++;
+ tx_left--;
+ workdone++;
+
+ if (workdone == RTASE_TX_BUDGET_DEFAULT)
+ break;
+ }
+
+ if (ring->dirty_idx != dirty_tx) {
+ dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
+ WRITE_ONCE(ring->dirty_idx, dirty_tx);
+
+ netif_subqueue_completed_wake(dev, ring->index, pkts_compl,
+ bytes_compl,
+ rtase_tx_avail(ring),
+ RTASE_TX_START_THRS);
+
+ if (ring->cur_idx != dirty_tx)
+ rtase_w8(tp, RTASE_TPPOLL, BIT(ring->index));
+ }
+
+ return 0;
+}
+
static void rtase_tx_desc_init(struct rtase_private *tp, u16 idx)
{
struct rtase_ring *ring = &tp->tx_ring[idx];
@@ -991,6 +1052,226 @@ static int rtase_close(struct net_device *dev)
return 0;
}
+static u32 rtase_tx_vlan_tag(const struct rtase_private *tp,
+ const struct sk_buff *skb)
+{
+ return (skb_vlan_tag_present(skb)) ?
+ (TX_VLAN_TAG | swab16(skb_vlan_tag_get(skb))) : 0x00;
+}
+
+static u32 rtase_tx_csum(struct sk_buff *skb, const struct net_device *dev)
+{
+ u32 csum_cmd = 0;
+ u8 ip_protocol;
+
+ switch (vlan_get_protocol(skb)) {
+ case htons(ETH_P_IP):
+ csum_cmd = TX_IPCS_C;
+ ip_protocol = ip_hdr(skb)->protocol;
+ break;
+
+ case htons(ETH_P_IPV6):
+ csum_cmd = TX_IPV6F_C;
+ ip_protocol = ipv6_hdr(skb)->nexthdr;
+ break;
+
+ default:
+ ip_protocol = IPPROTO_RAW;
+ break;
+ }
+
+ if (ip_protocol == IPPROTO_TCP)
+ csum_cmd |= TX_TCPCS_C;
+ else if (ip_protocol == IPPROTO_UDP)
+ csum_cmd |= TX_UDPCS_C;
+ else
+ WARN_ON_ONCE(1);
+
+ csum_cmd |= u32_encode_bits(skb_transport_offset(skb), TCPHO_MASK);
+
+ return csum_cmd;
+}
+
+static int rtase_xmit_frags(struct rtase_ring *ring, struct sk_buff *skb,
+ u32 opts1, u32 opts2)
+{
+ const struct skb_shared_info *info = skb_shinfo(skb);
+ const struct rtase_private *tp = ring->ivec->tp;
+ const u8 nr_frags = info->nr_frags;
+ struct tx_desc *txd = NULL;
+ u32 cur_frag, entry;
+
+ entry = ring->cur_idx;
+ for (cur_frag = 0; cur_frag < nr_frags; cur_frag++) {
+ const skb_frag_t *frag = &info->frags[cur_frag];
+ dma_addr_t mapping;
+ u32 status, len;
+ void *addr;
+
+ entry = (entry + 1) % NUM_DESC;
+
+ txd = ring->desc + sizeof(struct tx_desc) * entry;
+ len = skb_frag_size(frag);
+ addr = skb_frag_address(frag);
+ mapping = dma_map_single(&tp->pdev->dev, addr, len,
+ DMA_TO_DEVICE);
+
+ if (unlikely(dma_mapping_error(&tp->pdev->dev, mapping))) {
+ if (unlikely(net_ratelimit()))
+ netdev_err(tp->dev,
+ "Failed to map TX fragments DMA!\n");
+
+ goto err_out;
+ }
+
+ if (((entry + 1) % NUM_DESC) == 0)
+ status = (opts1 | len | RING_END);
+ else
+ status = opts1 | len;
+
+ if (cur_frag == (nr_frags - 1)) {
+ ring->skbuff[entry] = skb;
+ status |= TX_LAST_FRAG;
+ }
+
+ ring->mis.len[entry] = len;
+ txd->addr = cpu_to_le64(mapping);
+ txd->opts2 = cpu_to_le32(opts2);
+
+ /* make sure the operating fields have been updated */
+ wmb();
+ txd->opts1 = cpu_to_le32(status);
+ }
+
+ return cur_frag;
+
+err_out:
+ rtase_tx_clear_range(ring, ring->cur_idx + 1, cur_frag);
+ return -EIO;
+}
+
+static netdev_tx_t rtase_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct skb_shared_info *shinfo = skb_shinfo(skb);
+ struct rtase_private *tp = netdev_priv(dev);
+ u32 q_idx, entry, len, opts1, opts2;
+ struct netdev_queue *tx_queue;
+ bool stop_queue, door_bell;
+ u32 mss = shinfo->gso_size;
+ struct rtase_ring *ring;
+ struct tx_desc *txd;
+ dma_addr_t mapping;
+ int frags;
+
+ /* multiqueues */
+ q_idx = skb_get_queue_mapping(skb);
+ ring = &tp->tx_ring[q_idx];
+ tx_queue = netdev_get_tx_queue(dev, q_idx);
+
+ if (unlikely(!rtase_tx_avail(ring))) {
+ if (net_ratelimit())
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
+ goto err_stop;
+ }
+
+ entry = ring->cur_idx % NUM_DESC;
+ txd = ring->desc + sizeof(struct tx_desc) * entry;
+
+ opts1 = DESC_OWN;
+ opts2 = rtase_tx_vlan_tag(tp, skb);
+
+ /* tcp segmentation offload (or tcp large send) */
+ if (mss) {
+ if (shinfo->gso_type & SKB_GSO_TCPV4) {
+ opts1 |= GIANT_SEND_V4;
+ } else if (shinfo->gso_type & SKB_GSO_TCPV6) {
+ if (skb_cow_head(skb, 0))
+ goto err_dma_0;
+
+ tcp_v6_gso_csum_prep(skb);
+ opts1 |= GIANT_SEND_V6;
+ } else {
+ WARN_ON_ONCE(1);
+ }
+
+ opts1 |= u32_encode_bits(skb_transport_offset(skb), TCPHO_MASK);
+ opts2 |= u32_encode_bits(mss, MSS_MASK);
+ } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ opts2 |= rtase_tx_csum(skb, dev);
+ }
+
+ frags = rtase_xmit_frags(ring, skb, opts1, opts2);
+ if (unlikely(frags < 0))
+ goto err_dma_0;
+
+ if (frags) {
+ len = skb_headlen(skb);
+ opts1 |= TX_FIRST_FRAG;
+ } else {
+ len = skb->len;
+ ring->skbuff[entry] = skb;
+ opts1 |= TX_FIRST_FRAG | TX_LAST_FRAG;
+ }
+
+ if (((entry + 1) % NUM_DESC) == 0)
+ opts1 |= (len | RING_END);
+ else
+ opts1 |= len;
+
+ mapping = dma_map_single(&tp->pdev->dev, skb->data, len,
+ DMA_TO_DEVICE);
+
+ if (unlikely(dma_mapping_error(&tp->pdev->dev, mapping))) {
+ if (unlikely(net_ratelimit()))
+ netdev_err(dev, "Failed to map TX DMA!\n");
+
+ goto err_dma_1;
+ }
+
+ ring->mis.len[entry] = len;
+ txd->addr = cpu_to_le64(mapping);
+ txd->opts2 = cpu_to_le32(opts2);
+ txd->opts1 = cpu_to_le32(opts1 & ~DESC_OWN);
+
+ /* make sure the operating fields have been updated */
+ wmb();
+
+ door_bell = __netdev_tx_sent_queue(tx_queue, skb->len, netdev_xmit_more());
+
+ txd->opts1 = cpu_to_le32(opts1);
+
+ skb_tx_timestamp(skb);
+
+ /* tx needs to see descriptor changes before updated cur_idx */
+ smp_wmb();
+
+ WRITE_ONCE(ring->cur_idx, ring->cur_idx + frags + 1);
+
+ stop_queue = !netif_subqueue_maybe_stop(dev, ring->index, rtase_tx_avail(ring),
+ RTASE_TX_STOP_THRS,
+ RTASE_TX_START_THRS);
+
+ if (door_bell || stop_queue)
+ rtase_w8(tp, RTASE_TPPOLL, BIT(ring->index));
+
+ return NETDEV_TX_OK;
+
+err_dma_1:
+ ring->skbuff[entry] = NULL;
+ rtase_tx_clear_range(ring, ring->cur_idx + 1, frags);
+
+err_dma_0:
+ dev->stats.tx_dropped++;
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+
+err_stop:
+ netif_stop_queue(dev);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_BUSY;
+}
+
static void rtase_enable_eem_write(const struct rtase_private *tp)
{
u8 val;
@@ -1042,6 +1323,7 @@ static void rtase_netpoll(struct net_device *dev)
static const struct net_device_ops rtase_netdev_ops = {
.ndo_open = rtase_open,
.ndo_stop = rtase_close,
+ .ndo_start_xmit = rtase_start_xmit,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = rtase_netpoll,
#endif
--
2.34.1
next prev parent reply other threads:[~2024-01-05 8:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-05 8:57 [PATCH net-next v15 00/13] Add Realtek automotive PCIe driver Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 01/13] rtase: Add pci table supported in this module Justin Lai
2024-01-05 9:33 ` Jiri Pirko
2024-01-05 8:57 ` [PATCH net-next v15 02/13] rtase: Implement the .ndo_open function Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 03/13] rtase: Implement the rtase_down function Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 04/13] rtase: Implement the interrupt routine and rtase_poll Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 05/13] rtase: Implement hardware configuration function Justin Lai
2024-01-05 8:57 ` Justin Lai [this message]
2024-01-05 8:57 ` [PATCH net-next v15 07/13] rtase: Implement a function to receive packets Justin Lai
2024-01-05 8:57 ` [PATCH net-next v15 08/13] rtase: Implement net_device_ops Justin Lai
2024-01-05 9:04 ` [PATCH net-next v15 00/13] Add Realtek automotive PCIe driver Justin Lai
-- strict thread matches above, loose matches on Subject: below --
2024-01-05 8:54 [PATCH net-next v15 05/13] rtase: Implement hardware configuration function Justin Lai
2024-01-05 8:54 ` [PATCH net-next v15 06/13] rtase: Implement .ndo_start_xmit function Justin Lai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240105085737.376885-7-justinlai0215@realtek.com \
--to=justinlai0215@realtek.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=larry.chiu@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox