[PATCH v5 0/4] RTL9300 MDIO driver

[Chris Packham <chris.packham@alliedtelesis.co.nz>]

This series adds a driver for the MDIO controller on the RTL9300 family
of devices. The controller is a little unique in that we can't access the SMI
interfaces directly. This means we need to use the hardware description from
the DTS to compute a mapping of switch port to mdio bus/address.

Note that the dt-bindings: mfd patch is dependent on the dt-bindings: net patch.

Gmail seems to have decided to throttle mail coming from our domain so there
has been some things I've responded to that have hit lore.kernel.org but may
not have been delivered directly. So sorry if it looks like I've ignored
something. That's also why I haven't send this round out earlier as hopefully
we've done enough to get of Google's naughty list.

Chris Packham (4):
  dt-bindings: net: Add Realtek MDIO controller
  dt-bindings: mfd: Add MDIO interface to rtl9301-switch
  mips: dts: realtek: Add MDIO controller
  net: mdio: Add RTL9300 MDIO driver

 .../bindings/mfd/realtek,rtl9301-switch.yaml  |  29 ++
 .../bindings/net/realtek,rtl9301-mdio.yaml    |  98 ++++
 arch/mips/boot/dts/realtek/rtl930x.dtsi       |  33 ++
 drivers/net/mdio/Kconfig                      |   7 +
 drivers/net/mdio/Makefile                     |   1 +
 drivers/net/mdio/mdio-realtek-rtl9300.c       | 436 ++++++++++++++++++
 6 files changed, 604 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml
 create mode 100644 drivers/net/mdio/mdio-realtek-rtl9300.c

-- 
2.48.1