From: Stephen Hemminger <stephen@networkplumber.org>
To: netdev@vger.kernel.org
Cc: jiri@resnulli.us, jhs@mojatatu.com, horms@kernel.org,
Stephen Hemminger <stephen@networkplumber.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Dave Taht <dave.taht@gmail.com>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net v8 4/6] net/sched: netem: validate slot configuration
Date: Fri, 17 Apr 2026 20:19:42 -0700 [thread overview]
Message-ID: <20260418032027.900913-5-stephen@networkplumber.org> (raw)
In-Reply-To: <20260418032027.900913-1-stephen@networkplumber.org>
Reject slot configurations that have no defensible meaning:
- negative min_delay or max_delay
- min_delay greater than max_delay
- negative dist_delay or dist_jitter
- negative max_packets or max_bytes
Negative or out-of-order delays underflow in get_slot_next(),
producing garbage intervals. Negative limits trip the per-slot
accounting (packets_left/bytes_left <= 0) on the first packet of
every slot, defeating the rate-limiting half of the slot feature.
Note that dist_jitter has been silently coerced to its absolute
value by get_slot() since the feature was introduced; rejecting
negatives here converts that silent coercion into -EINVAL. The
abs() can be removed in a follow-up.
Fixes: 836af83b54e3 ("netem: support delivering packets in delayed time slots")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
net/sched/sch_netem.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index 556f9747f0e7..640b51be807a 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -827,6 +827,29 @@ static int get_dist_table(struct disttable **tbl, const struct nlattr *attr)
return 0;
}
+static int validate_slot(const struct nlattr *attr, struct netlink_ext_ack *extack)
+{
+ const struct tc_netem_slot *c = nla_data(attr);
+
+ if (c->min_delay < 0 || c->max_delay < 0) {
+ NL_SET_ERR_MSG_ATTR(extack, attr, "negative slot delay");
+ return -EINVAL;
+ }
+ if (c->min_delay > c->max_delay) {
+ NL_SET_ERR_MSG_ATTR(extack, attr, "slot min delay greater than max delay");
+ return -EINVAL;
+ }
+ if (c->dist_delay < 0 || c->dist_jitter < 0) {
+ NL_SET_ERR_MSG_ATTR(extack, attr, "negative dist delay");
+ return -EINVAL;
+ }
+ if (c->max_packets < 0 || c->max_bytes < 0) {
+ NL_SET_ERR_MSG_ATTR(extack, attr, "negative slot limit");
+ return -EINVAL;
+ }
+ return 0;
+}
+
static void get_slot(struct netem_sched_data *q, const struct nlattr *attr)
{
const struct tc_netem_slot *c = nla_data(attr);
@@ -1040,6 +1063,12 @@ static int netem_change(struct Qdisc *sch, struct nlattr *opt,
goto table_free;
}
+ if (tb[TCA_NETEM_SLOT]) {
+ ret = validate_slot(tb[TCA_NETEM_SLOT], extack);
+ if (ret)
+ goto table_free;
+ }
+
sch_tree_lock(sch);
/* backup q->clg and q->loss_model */
old_clg = q->clg;
--
2.53.0
next prev parent reply other threads:[~2026-04-18 3:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-18 3:19 [PATCH v8 net 0/6] netem: bug fixes Stephen Hemminger
2026-04-18 3:19 ` [PATCH net v8 1/6] net/sched: netem: fix probability gaps in 4-state loss model Stephen Hemminger
2026-04-18 3:19 ` [PATCH net v8 2/6] net/sched: netem: fix queue limit check to include reordered packets Stephen Hemminger
2026-04-21 13:15 ` Simon Horman
2026-04-18 3:19 ` [PATCH net v8 3/6] net/sched: netem: only reseed PRNG when seed is explicitly provided Stephen Hemminger
2026-04-18 3:19 ` Stephen Hemminger [this message]
2026-04-21 13:10 ` [PATCH net v8 4/6] net/sched: netem: validate slot configuration Simon Horman
2026-04-18 3:19 ` [PATCH net v8 5/6] net/sched: netem: fix slot delay calculation overflow Stephen Hemminger
2026-04-18 3:19 ` [PATCH net v8 6/6] net/sched: netem: check for negative latency and jitter Stephen Hemminger
2026-04-21 13:16 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260418032027.900913-5-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dave.taht@gmail.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jhs@mojatatu.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox