From: "Michael S. Tsirkin" <mst@redhat.com>
To: Simon Schippers <simon.schippers@tu-dortmund.de>
Cc: willemdebruijn.kernel@gmail.com, jasowang@redhat.com,
andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, eperezma@redhat.com,
leiyang@redhat.com, stephen@networkplumber.org, jon@nutanix.com,
tim.gebauer@tu-dortmund.de, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
virtualization@lists.linux.dev
Subject: Re: [PATCH net-next v9 4/4] tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present
Date: Tue, 28 Apr 2026 08:50:21 -0400 [thread overview]
Message-ID: <20260428084851-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20260428123859.19578-5-simon.schippers@tu-dortmund.de>
On Tue, Apr 28, 2026 at 02:38:59PM +0200, Simon Schippers wrote:
> This commit prevents tail-drop when a qdisc is present and the ptr_ring
> becomes full. Once an entry is successfully produced and the ptr_ring
> reaches capacity, the netdev queue is stopped instead of dropping
> subsequent packets.
>
> If producing an entry fails anyways due to a race, tun_net_xmit returns
> NETDEV_TX_BUSY, again avoiding a drop. Such races are expected because
> LLTX is enabled and the transmit path operates without the usual locking.
>
> If no qdisc is present, the previous tail-drop behavior is preserved.
>
> The existing __tun_wake_queue() function of the consumer races with the
> producer for waking/stopping the netdev queue: the consumer may drain
> the ring just as the producer stops the queue, leading to a permanent
> stall. To avoid this, the producer re-checks the ring after stopping
> and wakes the queue itself if space was just made. An
> smp_mb__after_atomic() is required so the re-peek of the ring sees any
> drain that the consumer performed.
> smp_mb__after_atomic() pairs with the test_and_clear_bit() inside of
> netif_wake_subqueue():
>
> Consumer CPU Producer CPU
> ======================== =========================
> __ptr_ring_consume()
> netif_wake_subqueue() netif_tx_stop_queue()
> /\ smp_mb__after_atomic()
> || __ptr_ring_produce_peek()
> contains RMW operation
> test_and_clear_bit()
> /\
> ||
> "Fully ordered RMW:
> smp_mb() before + after"
> - atomic_t.txt
>
> Benchmarks:
> The benchmarks show a slight regression in raw transmission performance,
> though no packets are lost anymore.
Could you include the packets received as well?
To demonstrate the gains/lack of loss.
>
> The previously introduced threshold to only wake after the queue stopped
> and half of the ring was consumed showed to be a descent choice:
> Waking the queue whenever a consume made space in the ring strongly
> degrades performance for tap, while waking only when the ring is empty
> is too late and also hurts throughput for tap & tap+vhost-net.
> Other ratios (3/4, 7/8) showed similar results (not shown here), so
> 1/2 was chosen for the sake of simplicity for both tun/tap and
> tun/tap+vhost-net.
>
> Test setup:
> AMD Ryzen 5 5600X at 4.3 GHz, 3200 MHz RAM, isolated QEMU threads;
> Average over 50 runs @ 100,000,000 packets. SRSO and spectre v2
> mitigations disabled.
>
> Note for tap+vhost-net:
> XDP drop program active in VM -> ~2.5x faster, slower for tap due to
> more syscalls (high utilization of entry_SYSRETQ_unsafe_stack in perf)
>
> +--------------------------+--------------+----------------+----------+
> | 1 thread | Stock | Patched with | diff |
> | sending | | fq_codel qdisc | |
> +------------+-------------+--------------+----------------+----------+
> | TAP | Transmitted | 1.136 Mpps | 1.130 Mpps | -0.6% |
> | +-------------+--------------+----------------+----------+
> | | Lost/s | 3.758 Mpps | 0 pps | |
> +------------+-------------+--------------+----------------+----------+
> | TAP | Transmitted | 3.858 Mpps | 3.816 Mpps | -1.1% |
> | +-------------+--------------+----------------+----------+
> | +vhost-net | Lost/s | 789.8 Kpps | 0 pps | |
> +------------+-------------+--------------+----------------+----------+
>
> +--------------------------+--------------+----------------+----------+
> | 2 threads | Stock | Patched with | diff |
> | sending | | fq_codel qdisc | |
> +------------+-------------+--------------+----------------+----------+
> | TAP | Transmitted | 1.117 Mpps | 1.087 Mpps | -2.7% |
> | +-------------+--------------+----------------+----------+
> | | Lost/s | 8.476 Mpps | 0 pps | |
> +------------+-------------+--------------+----------------+----------+
> | TAP | Transmitted | 3.679 Mpps | 3.464 Mpps | -5.8% |
> | +-------------+--------------+----------------+----------+
> | +vhost-net | Lost/s | 5.306 Mpps | 0 pps | |
> +------------+-------------+--------------+----------------+----------+
>
> Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
> Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
> Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
> ---
> drivers/net/tun.c | 30 ++++++++++++++++++++++++++++--
> 1 file changed, 28 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/tun.c b/drivers/net/tun.c
> index efe809597622..c2a1618cc9db 100644
> --- a/drivers/net/tun.c
> +++ b/drivers/net/tun.c
> @@ -1011,6 +1011,8 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
> struct netdev_queue *queue;
> struct tun_file *tfile;
> int len = skb->len;
> + bool qdisc_present;
> + int ret;
>
> rcu_read_lock();
> tfile = rcu_dereference(tun->tfiles[txq]);
> @@ -1065,13 +1067,37 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
>
> nf_reset_ct(skb);
>
> - if (ptr_ring_produce(&tfile->tx_ring, skb)) {
> + queue = netdev_get_tx_queue(dev, txq);
> + qdisc_present = !qdisc_txq_has_no_queue(queue);
> +
> + spin_lock(&tfile->tx_ring.producer_lock);
> + ret = __ptr_ring_produce(&tfile->tx_ring, skb);
> + if (__ptr_ring_produce_peek(&tfile->tx_ring) && qdisc_present) {
> + netif_tx_stop_queue(queue);
> + /* Re-peek and wake if the consumer drained the ring
> + * concurrently in a race. smp_mb__after_atomic() pairs
> + * with the test_and_clear_bit() of netif_wake_subqueue()
> + * in __tun_wake_queue().
> + */
> + smp_mb__after_atomic();
> + if (!__ptr_ring_produce_peek(&tfile->tx_ring))
> + netif_tx_wake_queue(queue);
> + }
> + spin_unlock(&tfile->tx_ring.producer_lock);
> +
> + if (ret) {
> + /* If a qdisc is attached to our virtual device,
> + * returning NETDEV_TX_BUSY is allowed.
> + */
> + if (qdisc_present) {
> + rcu_read_unlock();
> + return NETDEV_TX_BUSY;
> + }
> drop_reason = SKB_DROP_REASON_FULL_RING;
> goto drop;
> }
>
> /* dev->lltx requires to do our own update of trans_start */
> - queue = netdev_get_tx_queue(dev, txq);
> txq_trans_cond_update(queue);
>
> /* Notify and wake up reader process */
> --
> 2.43.0
next prev parent reply other threads:[~2026-04-28 12:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 12:38 [PATCH net-next v9 0/4] tun/tap & vhost-net: apply qdisc backpressure on full ptr_ring to reduce TX drops Simon Schippers
2026-04-28 12:38 ` [PATCH net-next v9 1/4] tun/tap: add ptr_ring consume helper with netdev queue wakeup Simon Schippers
2026-04-28 12:38 ` [PATCH net-next v9 2/4] vhost-net: wake queue of tun/tap after ptr_ring consume Simon Schippers
2026-04-28 12:38 ` [PATCH net-next v9 3/4] ptr_ring: move free-space check into separate helper Simon Schippers
2026-04-28 12:38 ` [PATCH net-next v9 4/4] tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present Simon Schippers
2026-04-28 12:50 ` Michael S. Tsirkin [this message]
2026-04-28 13:10 ` Simon Schippers
2026-04-28 13:22 ` Michael S. Tsirkin
2026-04-28 13:41 ` Simon Schippers
2026-04-28 14:10 ` Michael S. Tsirkin
2026-04-28 14:18 ` Simon Schippers
2026-04-28 14:32 ` Michael S. Tsirkin
2026-04-28 14:55 ` Simon Schippers
2026-04-29 21:04 ` [PATCH net-next v9 0/4] tun/tap & vhost-net: apply qdisc backpressure on full ptr_ring to reduce TX drops Simon Schippers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260428084851-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=eperezma@redhat.com \
--cc=jasowang@redhat.com \
--cc=jon@nutanix.com \
--cc=kuba@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=leiyang@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=simon.schippers@tu-dortmund.de \
--cc=stephen@networkplumber.org \
--cc=tim.gebauer@tu-dortmund.de \
--cc=virtualization@lists.linux.dev \
--cc=willemdebruijn.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox