[PATCH net 2/7] ionic: Handle failures from ionic_reset() when relevant

[Eric Joyner <eric.joyner@amd.com>]

From: Brett Creeley <brett.creeley@amd.com>

If ionic_reset() fails, then the device either wasn't ready to be
communicated with, the firmware is down, and/or the devcmd path is
already torn down. For teardown/remove cases we can ignore the
result of ionic_reset(). However, for any setup cases, we should
take the result seriously.

Note, older firmware always returns success for IONIC_CMD_RESET, so this
change will not break those. However, newer firmware may return failure
if the IONIC_CMD_RESET dev cmd fails.

Fixes: 8097a2f3d21a ("ionic: Reset LIF device while restarting LIF")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
---
 drivers/net/ethernet/pensando/ionic/ionic_lif.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
index 637e635bbf03..db4bbeda0b29 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
@@ -3473,7 +3473,9 @@ static void ionic_lif_handle_fw_up(struct ionic_lif *lif)
 	 * just need to reanimate it.
 	 */
 	ionic_init_devinfo(ionic);
-	ionic_reset(ionic);
+	err = ionic_reset(ionic);
+	if (err)
+		goto err_out;
 	err = ionic_identify(ionic);
 	if (err)
 		goto err_out;
-- 
2.17.1