[PATCH net 3/7] ionic: Fix unexpected dev_cmd failures

[Eric Joyner <eric.joyner@amd.com>]

From: Brett Creeley <brett.creeley@amd.com>

When polling for a devcmd completion it's possible for the driver to
timeout the command even if the dev_cmd has completed. This can cause
unexpected failures and device probe to fail. Fix this by reading
the dev_cmd's done bit one last time after breaking out of the poll
loop.

Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Suggested-by: Neel Patel <neel.patel@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
---
 drivers/net/ethernet/pensando/ionic/ionic_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_main.c b/drivers/net/ethernet/pensando/ionic/ionic_main.c
index 91f89b9ff807..810cef0fec93 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_main.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_main.c
@@ -541,6 +541,10 @@ static int __ionic_dev_cmd_wait(struct ionic *ionic, unsigned long max_seconds,
 	}
 	duration = jiffies - start_time;
 
+	/* one final check to prevent unexpected timeout */
+	if (!done)
+		done = ionic_dev_cmd_done(idev);
+
 	dev_dbg(ionic->dev, "DEVCMD %s (%d) done=%d took %ld secs (%ld jiffies)\n",
 		ionic_opcode_to_str(opcode), opcode,
 		done, duration / HZ, duration);
-- 
2.17.1