Netdev List
 help / color / mirror / Atom feed
From: Herve Codina <herve.codina@bootlin.com>
To: Linus Walleij <linusw@kernel.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Horatiu Vultur <horatiu.vultur@microchip.com>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: net: lan966x: Accept standard ethernet prefixes
Date: Thu, 7 May 2026 13:40:43 +0200	[thread overview]
Message-ID: <20260507134043.35fdb1b9@bootlin.com> (raw)
In-Reply-To: <20260507-lan966-binding-v1-1-e99293d2a4ec@kernel.org>

Hi Linus,

On Thu, 07 May 2026 11:26:01 +0200
Linus Walleij <linusw@kernel.org> wrote:

> The dsa.yaml and ethernet-switch.yaml bindings recommend
> prefixing ethernet switches and ports with "ethernet-" so
> make the LAN966x do the same.
> 
> Reported-by: Herve Codina <herve.codina@bootlin.com>
> Signed-off-by: Linus Walleij <linusw@kernel.org>
> ---
>  .../devicetree/bindings/net/microchip,lan966x-switch.yaml      | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
> index 306ef9ecf2b9..0f0f35865ef4 100644
> --- a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
> @@ -17,7 +17,7 @@ description: |
>  
>  properties:
>    $nodename:
> -    pattern: "^switch@[0-9a-f]+$"
> +    pattern: "^(ethernet-)?switch@[0-9a-f]+$"
>  
>    compatible:
>      const: microchip,lan966x-switch
> @@ -70,7 +70,7 @@ properties:
>      additionalProperties: false
>  
>      patternProperties:
> -      "^port@[0-9a-f]+$":
> +      "^(ethernet-)?port@[0-9a-f]+$":
>          type: object
>  
>          $ref: /schemas/net/ethernet-controller.yaml#
> @@ -138,7 +138,7 @@ additionalProperties: false
>  examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> -    switch: switch@e0000000 {
> +    switch: ethernet-switch@e0000000 {
>        compatible = "microchip,lan966x-switch";
>        reg =  <0xe0000000 0x0100000>,
>               <0xe2000000 0x0800000>;
> @@ -151,14 +151,14 @@ examples:
>          #address-cells = <1>;
>          #size-cells = <0>;
>  
> -        port0: port@0 {
> +        port0: ethernet-port@0 {
>            reg = <0>;
>            phy-handle = <&phy0>;
>            phys = <&serdes 0 0>;
>            phy-mode = "gmii";
>          };
>  
> -        port1: port@1 {
> +        port1: ethernet-port@1 {
>            reg = <1>;
>            sfp = <&sfp_eth1>;
>            managed = "in-band-status";
> 
> ---
> base-commit: 254f49634ee16a731174d2ae34bc50bd5f45e731
> change-id: 20260507-lan966-binding-0df62a018509
> 
> Best regards,
> --  
> Linus Walleij <linusw@kernel.org>
> 

With those changes, dtb_check will not be happy when following dtsi/dts are
involved:
  - arch/arm/boot/dts/microchip/lan966x.dtsi
  - arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
  - arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
  - arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
  - arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts

IMHO they should be updated as part of the series.

Best regards,
Hervé

  reply	other threads:[~2026-05-07 11:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-07  9:26 [PATCH] dt-bindings: net: lan966x: Accept standard ethernet prefixes Linus Walleij
2026-05-07 11:40 ` Herve Codina [this message]
2026-05-07 11:59   ` Rob Herring
2026-05-07 12:13     ` Herve Codina
2026-05-07 15:41 ` Rob Herring (Arm)
2026-05-08 22:20 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260507134043.35fdb1b9@bootlin.com \
    --to=herve.codina@bootlin.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=horatiu.vultur@microchip.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linusw@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox