Netdev List
 help / color / mirror / Atom feed
From: Michael Dege <michael.dege@renesas.com>
To: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
	"Andrew Lunn" <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Paul Barker" <paul@pbarker.dev>
Cc: netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	Michael Dege <michael.dege@renesas.com>
Subject: [PATCH net-next v4 01/13] net: renesas: rswitch: improve port change mode functions
Date: Mon, 11 May 2026 10:52:04 +0200	[thread overview]
Message-ID: <20260511-rswitch_add_vlans-v4-1-a5a225f8faae@renesas.com> (raw)
In-Reply-To: <20260511-rswitch_add_vlans-v4-0-a5a225f8faae@renesas.com>

For ETHA and GWCA ports every mode change from operational to
configuration and vice-versa requires to change the mode to
"disable" first. This was done by calling the function twice.
Let the change_mode functione take care of this requiered step
in a single call.

Signed-off-by: Michael Dege <michael.dege@renesas.com>
---
 drivers/net/ethernet/renesas/rswitch_main.c | 43 +++++++++++++++--------------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/renesas/rswitch_main.c b/drivers/net/ethernet/renesas/rswitch_main.c
index 6fe964816322..9b739594cc02 100644
--- a/drivers/net/ethernet/renesas/rswitch_main.c
+++ b/drivers/net/ethernet/renesas/rswitch_main.c
@@ -176,14 +176,21 @@ static int rswitch_gwca_change_mode(struct rswitch_private *priv,
 	if (!rswitch_agent_clock_is_enabled(priv->addr, priv->gwca.index))
 		rswitch_agent_clock_ctrl(priv->addr, priv->gwca.index, 1);
 
-	iowrite32(mode, priv->addr + GWMC);
+	iowrite32(GWMC_OPC_DISABLE, priv->addr + GWMC);
 
-	ret = rswitch_reg_wait(priv->addr, GWMS, GWMS_OPS_MASK, mode);
+	ret = rswitch_reg_wait(priv->addr, GWMS, GWMS_OPS_MASK, GWMC_OPC_DISABLE);
+	if (ret < 0)
+		return ret;
 
-	if (mode == GWMC_OPC_DISABLE)
+	if (mode == GWMC_OPC_DISABLE) {
 		rswitch_agent_clock_ctrl(priv->addr, priv->gwca.index, 0);
 
-	return ret;
+		return ret;
+	}
+
+	iowrite32(mode, priv->addr + GWMC);
+
+	return rswitch_reg_wait(priv->addr, GWMS, GWMS_OPS_MASK, mode);
 }
 
 static int rswitch_gwca_mcast_table_reset(struct rswitch_private *priv)
@@ -682,9 +689,6 @@ static int rswitch_gwca_hw_init(struct rswitch_private *priv)
 	unsigned int i;
 	int err;
 
-	err = rswitch_gwca_change_mode(priv, GWMC_OPC_DISABLE);
-	if (err < 0)
-		return err;
 	err = rswitch_gwca_change_mode(priv, GWMC_OPC_CONFIG);
 	if (err < 0)
 		return err;
@@ -717,9 +721,6 @@ static int rswitch_gwca_hw_init(struct rswitch_private *priv)
 			return err;
 	}
 
-	err = rswitch_gwca_change_mode(priv, GWMC_OPC_DISABLE);
-	if (err < 0)
-		return err;
 	return rswitch_gwca_change_mode(priv, GWMC_OPC_OPERATION);
 }
 
@@ -727,9 +728,6 @@ static int rswitch_gwca_hw_deinit(struct rswitch_private *priv)
 {
 	int err;
 
-	err = rswitch_gwca_change_mode(priv, GWMC_OPC_DISABLE);
-	if (err < 0)
-		return err;
 	err = rswitch_gwca_change_mode(priv, GWMC_OPC_RESET);
 	if (err < 0)
 		return err;
@@ -1116,14 +1114,20 @@ static int rswitch_etha_change_mode(struct rswitch_etha *etha,
 	if (!rswitch_agent_clock_is_enabled(etha->coma_addr, etha->index))
 		rswitch_agent_clock_ctrl(etha->coma_addr, etha->index, 1);
 
-	iowrite32(mode, etha->addr + EAMC);
-
-	ret = rswitch_reg_wait(etha->addr, EAMS, EAMS_OPS_MASK, mode);
+	iowrite32(EAMC_OPC_DISABLE, etha->addr + EAMC);
+	ret = rswitch_reg_wait(etha->addr, EAMS, EAMS_OPS_MASK, EAMC_OPC_DISABLE);
+	if (ret < 0)
+		return ret;
 
-	if (mode == EAMC_OPC_DISABLE)
+	if (mode == EAMC_OPC_DISABLE) {
 		rswitch_agent_clock_ctrl(etha->coma_addr, etha->index, 0);
 
-	return ret;
+		return ret;
+	}
+
+	iowrite32(mode, etha->addr + EAMC);
+
+	return rswitch_reg_wait(etha->addr, EAMS, EAMS_OPS_MASK, mode);
 }
 
 static void rswitch_etha_read_mac_address(struct rswitch_etha *etha)
@@ -1203,9 +1207,6 @@ static int rswitch_etha_hw_init(struct rswitch_etha *etha, const u8 *mac)
 {
 	int err;
 
-	err = rswitch_etha_change_mode(etha, EAMC_OPC_DISABLE);
-	if (err < 0)
-		return err;
 	err = rswitch_etha_change_mode(etha, EAMC_OPC_CONFIG);
 	if (err < 0)
 		return err;

-- 
2.43.0


  reply	other threads:[~2026-05-11  8:57 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-11  8:52 [net-next PATCH v4 00/13] net: renesas: rswitch: R-Car S4 add VLAN aware switching Michael Dege
2026-05-11  8:52 ` Michael Dege [this message]
2026-05-11  8:52 ` [PATCH net-next v4 02/13] net: renesas: rswitch: use device instead of net_device Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 03/13] net: renesas: rswitch: fix FWPC2 register access macros Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 04/13] net: renesas: rswitch: add register definitions for vlan support Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 05/13] net: renesas: rswitch: add exception path for packets with unknown dst MAC Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 06/13] net: renesas: rswitch: add forwarding rules for gwca Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 07/13] net: renesas: rswitch: make helper functions available to whole driver Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 08/13] net: renesas: rswitch: add basic vlan init to rswitch_fwd_init Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 09/13] net: renesas: rswitch: update port HW init Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 10/13] net: renesas: rswitch: clean up is_rdev rswitch_device checking Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 11/13] net: renesas: rswitch: add passing of rswitch_private into notifiers Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 12/13] net: renesas: rswitch: add handler for FDB notification Michael Dege
2026-05-11  8:52 ` [PATCH net-next v4 13/13] net: renesas: rswitch: add vlan aware switching Michael Dege

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260511-rswitch_add_vlans-v4-1-a5a225f8faae@renesas.com \
    --to=michael.dege@renesas.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=pabeni@redhat.com \
    --cc=paul@pbarker.dev \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox