From: Michael Dege <michael.dege@renesas.com>
To: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"Paul Barker" <paul@pbarker.dev>
Cc: netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Michael Dege <michael.dege@renesas.com>
Subject: [PATCH net-next v4 07/13] net: renesas: rswitch: make helper functions available to whole driver
Date: Mon, 11 May 2026 10:52:10 +0200 [thread overview]
Message-ID: <20260511-rswitch_add_vlans-v4-7-a5a225f8faae@renesas.com> (raw)
In-Reply-To: <20260511-rswitch_add_vlans-v4-0-a5a225f8faae@renesas.com>
These functions will be needed in L2 and vlan handling. Remove static
declaration and add function prototype to rswitch.h.
Signed-off-by: Michael Dege <michael.dege@renesas.com>
---
drivers/net/ethernet/renesas/rswitch.h | 6 ++++--
drivers/net/ethernet/renesas/rswitch_main.c | 12 ++++++------
2 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/renesas/rswitch.h b/drivers/net/ethernet/renesas/rswitch.h
index 8415f52a239e..d7a8866a3993 100644
--- a/drivers/net/ethernet/renesas/rswitch.h
+++ b/drivers/net/ethernet/renesas/rswitch.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* Renesas Ethernet Switch device driver
*
- * Copyright (C) 2022-2025 Renesas Electronics Corporation
+ * Copyright (C) 2022-2026 Renesas Electronics Corporation
*/
#ifndef __RSWITCH_H__
@@ -1219,5 +1219,7 @@ struct rswitch_private {
bool is_rdev(const struct net_device *ndev);
void rswitch_modify(void __iomem *addr, enum rswitch_reg reg, u32 clear, u32 set);
-
+int rswitch_reg_wait(void __iomem *addr, u32 offs, u32 mask, u32 expected);
+int rswitch_gwca_change_mode(struct rswitch_private *priv, enum rswitch_gwca_mode mode);
+int rswitch_etha_change_mode(struct rswitch_etha *etha, enum rswitch_etha_mode mode);
#endif /* #ifndef __RSWITCH_H__ */
diff --git a/drivers/net/ethernet/renesas/rswitch_main.c b/drivers/net/ethernet/renesas/rswitch_main.c
index bf26c1a3384a..7d85905f2be2 100644
--- a/drivers/net/ethernet/renesas/rswitch_main.c
+++ b/drivers/net/ethernet/renesas/rswitch_main.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/* Renesas Ethernet Switch device driver
*
- * Copyright (C) 2022-2025 Renesas Electronics Corporation
+ * Copyright (C) 2022-2026 Renesas Electronics Corporation
*/
#include <linux/clk.h>
@@ -32,7 +32,7 @@
#define RSWITCH_GPTP_OFFSET_S4 0x00018000
-static int rswitch_reg_wait(void __iomem *addr, u32 offs, u32 mask, u32 expected)
+int rswitch_reg_wait(void __iomem *addr, u32 offs, u32 mask, u32 expected)
{
u32 val;
@@ -168,8 +168,8 @@ static int rswitch_fwd_init(struct rswitch_private *priv)
}
/* Gateway CPU agent block (GWCA) */
-static int rswitch_gwca_change_mode(struct rswitch_private *priv,
- enum rswitch_gwca_mode mode)
+int rswitch_gwca_change_mode(struct rswitch_private *priv,
+ enum rswitch_gwca_mode mode)
{
int ret;
@@ -1168,8 +1168,8 @@ static int rswitch_gwca_ts_request_irqs(struct rswitch_private *priv)
}
/* Ethernet TSN Agent block (ETHA) and Ethernet MAC IP block (RMAC) */
-static int rswitch_etha_change_mode(struct rswitch_etha *etha,
- enum rswitch_etha_mode mode)
+int rswitch_etha_change_mode(struct rswitch_etha *etha,
+ enum rswitch_etha_mode mode)
{
int ret;
--
2.43.0
next prev parent reply other threads:[~2026-05-11 8:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-11 8:52 [net-next PATCH v4 00/13] net: renesas: rswitch: R-Car S4 add VLAN aware switching Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 01/13] net: renesas: rswitch: improve port change mode functions Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 02/13] net: renesas: rswitch: use device instead of net_device Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 03/13] net: renesas: rswitch: fix FWPC2 register access macros Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 04/13] net: renesas: rswitch: add register definitions for vlan support Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 05/13] net: renesas: rswitch: add exception path for packets with unknown dst MAC Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 06/13] net: renesas: rswitch: add forwarding rules for gwca Michael Dege
2026-05-11 8:52 ` Michael Dege [this message]
2026-05-11 8:52 ` [PATCH net-next v4 08/13] net: renesas: rswitch: add basic vlan init to rswitch_fwd_init Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 09/13] net: renesas: rswitch: update port HW init Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 10/13] net: renesas: rswitch: clean up is_rdev rswitch_device checking Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 11/13] net: renesas: rswitch: add passing of rswitch_private into notifiers Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 12/13] net: renesas: rswitch: add handler for FDB notification Michael Dege
2026-05-11 8:52 ` [PATCH net-next v4 13/13] net: renesas: rswitch: add vlan aware switching Michael Dege
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260511-rswitch_add_vlans-v4-7-a5a225f8faae@renesas.com \
--to=michael.dege@renesas.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=niklas.soderlund@ragnatech.se \
--cc=pabeni@redhat.com \
--cc=paul@pbarker.dev \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox