* [PATCH net v3] net: phy: DP83TC811: add reading of abilities
@ 2026-05-11 14:56 Sven Schuchmann
2026-05-11 15:10 ` Andrew Lunn
0 siblings, 1 reply; 2+ messages in thread
From: Sven Schuchmann @ 2026-05-11 14:56 UTC (permalink / raw)
To: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Florian Fainelli,
Dan Murphy, netdev, linux-kernel
Cc: maxime.chevallier, Sven Schuchmann
At this time the driver is not listing any speeds
it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT
for DP83TC811. Add the missing call for phylib to read the abilities.
v3:
- Fixed indentitation problems. no code changes.
v2:
- Fixed subject and added fixes tag. no code changes.
Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
---
drivers/net/phy/dp83tc811.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
index e480c2a07450..252fb12b3e68 100644
--- a/drivers/net/phy/dp83tc811.c
+++ b/drivers/net/phy/dp83tc811.c
@@ -393,6 +393,7 @@ static struct phy_driver dp83811_driver[] = {
.config_init = dp83811_config_init,
.config_aneg = dp83811_config_aneg,
.soft_reset = dp83811_phy_reset,
+ .get_features = genphy_c45_pma_read_ext_abilities,
.get_wol = dp83811_get_wol,
.set_wol = dp83811_set_wol,
.config_intr = dp83811_config_intr,
--
2.43.0
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH net v3] net: phy: DP83TC811: add reading of abilities
2026-05-11 14:56 [PATCH net v3] net: phy: DP83TC811: add reading of abilities Sven Schuchmann
@ 2026-05-11 15:10 ` Andrew Lunn
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Lunn @ 2026-05-11 15:10 UTC (permalink / raw)
To: Sven Schuchmann
Cc: Heiner Kallweit, Russell King, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Florian Fainelli, Dan Murphy, netdev,
linux-kernel, maxime.chevallier
On Mon, May 11, 2026 at 04:56:30PM +0200, Sven Schuchmann wrote:
> At this time the driver is not listing any speeds
> it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT
> for DP83TC811. Add the missing call for phylib to read the abilities.
>
> v3:
> - Fixed indentitation problems. no code changes.
> v2:
> - Fixed subject and added fixes tag. no code changes.
>
> Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
> Suggested-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-05-11 15:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-05-11 14:56 [PATCH net v3] net: phy: DP83TC811: add reading of abilities Sven Schuchmann
2026-05-11 15:10 ` Andrew Lunn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox