* [PATCH v2] net/mlx5: don't printk garbage when transceiver overheats
@ 2026-05-12 7:32 Will Mortensen
0 siblings, 0 replies; only message in thread
From: Will Mortensen @ 2026-05-12 7:32 UTC (permalink / raw)
To: Saeed Mahameed, Leon Romanovsky, Tariq Toukan, Mark Bloch, netdev
Cc: Shahar Shitrit, Carolina Jubran, Andrew Lunn, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Will Mortensen,
Jeremy Royal
When the mlx5 driver processes a temperature warning event, in events.c
and hwmon.c, temp_warn() calls print_sensor_names_in_bit_set(), which
calls hwmon_get_sensor_name() to get the NUL-terminated name of the
relevant sensor, and then prints it to dmesg. In particular,
print_sensor_names_in_bit_set() passes the bit index ("sensor index")
within the 128-bit vector in the warning event to
hwmon_get_sensor_name(). But hwmon_get_sensor_name() was expecting the
index of the hwmon channel, and the driver registers hwmon channels for
at most only two sensors: the ASIC sensor (sensor index 0) and the
module sensor (sensor index 64 or 65 if we're on a 2-port NIC). So when
the warning event concerned a module, hwmon_get_sensor_name() took the
64th or 65th element of the likely 2-element temp_channel_desc array and
thus returned a pointer to some other kernel memory past the end of it,
which was printed to dmesg up to the first NUL byte.
A further difficulty is that, at least in testing on our CX-8 C8240 with
firmware 40.47.1088, the warning event can have bits set for other
modules, e.g. if this PCI physical function is associated with
port/module 0, we might expect bit 64 to be set, but bit 65 (for port/
module 1) can also be set.
Fix this by clarifying that the argument to hwmon_get_sensor_name() is
the raw sensor index, and correctly converting it to the hwmon channel
index. Return NULL if the sensor index doesn't correspond to a hwmon
channel (e.g. because it's for the other port's module).
Fixes: 46fd50cfcc12 ("net/mlx5: Add sensor name to temperature event message")
Signed-off-by: Will Mortensen <will@extrahop.com>
Reviewed-by: Jeremy Royal <jeremyr@extrahop.com>
---
| 2 ++
| 15 ++++++++++++++-
| 2 +-
3 files changed, 17 insertions(+), 2 deletions(-)
--git a/drivers/net/ethernet/mellanox/mlx5/core/events.c b/drivers/net/ethernet/mellanox/mlx5/core/events.c
index 4d7f35b96876..9372551c7f90 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/events.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/events.c
@@ -165,6 +165,8 @@ static void print_sensor_names_in_bit_set(struct mlx5_core_dev *dev, struct mlx5
for_each_set_bit(i, bit_set_ptr, num_bits) {
const char *sensor_name = hwmon_get_sensor_name(hwmon, i + bit_set_offset);
+ if (!sensor_name)
+ continue;
mlx5_core_warn(dev, "Sensor name[%d]: %s\n", i + bit_set_offset, sensor_name);
}
}
--git a/drivers/net/ethernet/mellanox/mlx5/core/hwmon.c b/drivers/net/ethernet/mellanox/mlx5/core/hwmon.c
index afcdebac9c4f..747ff30362f1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/hwmon.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/hwmon.c
@@ -417,7 +417,20 @@ void mlx5_hwmon_dev_unregister(struct mlx5_core_dev *mdev)
mdev->hwmon = NULL;
}
-const char *hwmon_get_sensor_name(struct mlx5_hwmon *hwmon, int channel)
+const char *hwmon_get_sensor_name(struct mlx5_hwmon *hwmon, int sensor_idx)
{
+ int channel;
+
+ if (sensor_idx >= 64) {
+ if (hwmon->module_scount == 0)
+ return NULL;
+ channel = hwmon->asic_platform_scount;
+ if (sensor_idx != hwmon->temp_channel_desc[channel].sensor_index)
+ return NULL;
+ } else {
+ if (sensor_idx >= hwmon->asic_platform_scount)
+ return NULL;
+ channel = sensor_idx;
+ }
return hwmon->temp_channel_desc[channel].sensor_name;
}
--git a/drivers/net/ethernet/mellanox/mlx5/core/hwmon.h b/drivers/net/ethernet/mellanox/mlx5/core/hwmon.h
index f38271c22c10..b2476bf54ce5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/hwmon.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/hwmon.h
@@ -10,7 +10,7 @@
int mlx5_hwmon_dev_register(struct mlx5_core_dev *mdev);
void mlx5_hwmon_dev_unregister(struct mlx5_core_dev *mdev);
-const char *hwmon_get_sensor_name(struct mlx5_hwmon *hwmon, int channel);
+const char *hwmon_get_sensor_name(struct mlx5_hwmon *hwmon, int sensor_idx);
#else
static inline int mlx5_hwmon_dev_register(struct mlx5_core_dev *mdev)
---
base-commit: 70390501d1944d4e5b8f7352be180fceb3a44132
change-id: 20260508-b4-mlx5-sensor-fix-043d4a22f641
Best regards,
--
Will Mortensen <will@extrahop.com>
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-05-12 7:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-05-12 7:32 [PATCH v2] net/mlx5: don't printk garbage when transceiver overheats Will Mortensen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox