[PATCH net] net/mlx5: Skip disabled vports when setting max TX speed

[PATCH net] net/mlx5: Skip disabled vports when setting max TX speed

[Tariq Toukan]

From: Or Har-Toov <ohartoov@nvidia.com>

When setting vports max TX speed during LAG activation or bond state
changes, the code iterates over all eswitch vports. However, some
vports may not be enabled yet.

Skip vports that are not enabled to avoid sending FW commands for
uninitialized vports. Save the LAG aggregated speed in the vport
struct so it can be applied when the vport is enabled later.

Fixes: 50f1d188c580 ("net/mlx5: Propagate LAG effective max_tx_speed to vports")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
---
 .../net/ethernet/mellanox/mlx5/core/eswitch.c | 21 +++++++++++++++++++
 .../net/ethernet/mellanox/mlx5/core/eswitch.h |  1 +
 .../net/ethernet/mellanox/mlx5/core/lag/lag.c |  5 +++++
 3 files changed, 27 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 123c96716a54..7c8311f41232 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -908,6 +908,24 @@ static void esw_vport_cleanup(struct mlx5_eswitch *esw, struct mlx5_vport *vport
 	esw_vport_cleanup_acl(esw, vport);
 }
 
+static void mlx5_esw_vport_set_max_tx_speed(struct mlx5_eswitch *esw,
+					    struct mlx5_vport *vport)
+{
+	int ret;
+
+	if (!MLX5_CAP_ESW(esw->dev, esw_vport_state_max_tx_speed))
+		return;
+
+	ret = mlx5_modify_vport_max_tx_speed(esw->dev,
+					     MLX5_VPORT_STATE_OP_MOD_ESW_VPORT,
+					     vport->vport, true,
+					     vport->agg_max_tx_speed);
+	if (ret)
+		mlx5_core_dbg(esw->dev,
+			      "Failed to set vport %d speed %d, err=%d\n",
+			      vport->vport, vport->agg_max_tx_speed, ret);
+}
+
 int mlx5_esw_vport_enable(struct mlx5_eswitch *esw, struct mlx5_vport *vport,
 			  enum mlx5_eswitch_vport_event enabled_events)
 {
@@ -948,6 +966,9 @@ int mlx5_esw_vport_enable(struct mlx5_eswitch *esw, struct mlx5_vport *vport,
 
 	esw->enabled_vports++;
 	esw_debug(esw->dev, "Enabled VPORT(%d)\n", vport_num);
+
+	if (vport->agg_max_tx_speed)
+		mlx5_esw_vport_set_max_tx_speed(esw, vport);
 done:
 	mutex_unlock(&esw->state_lock);
 	return ret;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
index 5128f5020dae..e9cf7c592ce9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
@@ -247,6 +247,7 @@ struct mlx5_vport {
 	enum mlx5_eswitch_vport_event enabled_events;
 	int index;
 	struct mlx5_devlink_port *dl_port;
+	u32 agg_max_tx_speed;
 };
 
 struct mlx5_esw_indir_table;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
index 449e4bd86c06..f8e70ac5a85b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
@@ -1274,6 +1274,11 @@ static void mlx5_lag_modify_device_vports_speed(struct mlx5_core_dev *mdev,
 		if (vport->vport == MLX5_VPORT_UPLINK)
 			continue;
 
+		vport->agg_max_tx_speed = speed;
+
+		if (!vport->enabled)
+			continue;
+
 		ret = mlx5_modify_vport_max_tx_speed(mdev, op_mod,
 						     vport->vport, true, speed);
 		if (ret)

base-commit: f5b2772d14884f4be9e718644f1203d4d0e6f0d6
-- 
2.44.0