[PATCH net-next v2 0/2] net: lan743x: add RMII support for PCI11x1x

[Thangaraj Samynathan <thangaraj.s@microchip.com>]

This series adds RMII interface support for the Microchip PCI11x1x
Ethernet controller.

The PCI11x1x device supports RMII as an alternative MAC-PHY interface,
selected via the STRAP_READ software strap register. Patch 1 reads the
RMII strap bits from this register and sets the is_rmii_en flag. Patch 2
uses this flag to configure the PHY interface mode, phylink supported
interfaces, and enables RMII in hardware via the RMII_CTL register.

Change Log:
===========
v1 -> v2:
  - Remove redundant mac_capabilities &= ~MAC_1000FD; phylink already
    handles capability reduction for RMII via phy_caps_from_interface()
    [patch 2/2]

Thangaraj Samynathan (2):
  net: lan743x: add RMII strap status detection for PCI11x1x
  net: lan743x: add support for RMII interface

 drivers/net/ethernet/microchip/lan743x_main.c | 24 +++++++++++++++++++
 drivers/net/ethernet/microchip/lan743x_main.h |  6 +++++
 2 files changed, 30 insertions(+)

-- 
2.34.1