From: Thangaraj Samynathan <thangaraj.s@microchip.com>
To: <netdev@vger.kernel.org>
Cc: <andrew+netdev@lunn.ch>, <davem@davemloft.net>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
<bryan.whitehead@microchip.com>, <UNGLinuxDriver@microchip.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH net-next v2 1/2] net: lan743x: add RMII strap status detection for PCI11x1x
Date: Tue, 26 May 2026 21:10:53 +0530 [thread overview]
Message-ID: <20260526154054.19829-2-thangaraj.s@microchip.com> (raw)
In-Reply-To: <20260526154054.19829-1-thangaraj.s@microchip.com>
Extend pci11x1x_strap_get_status() to read the RMII strap bits from
the STRAP_READ register. The is_rmii_en flag is initialized to
false and updated based on the hardware strap only if SGMII is not
already enabled. This ensures correct interface identification during
adapter initialization.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
---
drivers/net/ethernet/microchip/lan743x_main.c | 7 +++++++
drivers/net/ethernet/microchip/lan743x_main.h | 3 +++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index f3332417162e..7d6ffaf13b5e 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -42,6 +42,7 @@ static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
u32 strap;
int ret;
+ adapter->is_rmii_en = false;
/* Timeout = 100 (i.e. 1 sec (10 msce * 100)) */
ret = lan743x_hs_syslock_acquire(adapter, 100);
if (ret < 0) {
@@ -73,6 +74,12 @@ static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
adapter->is_sgmii_en = false;
}
}
+
+ if (!adapter->is_sgmii_en && strap & STRAP_READ_USE_RMII_EN_) {
+ if (strap & STRAP_READ_RMII_EN_)
+ adapter->is_rmii_en = true;
+ }
+
netif_dbg(adapter, drv, adapter->netdev,
"SGMII I/F %sable\n", adapter->is_sgmii_en ? "En" : "Dis");
}
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index 160d94a7cee6..1d7d37456553 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -36,7 +36,9 @@
#define FPGA_SGMII_OP BIT(24)
#define STRAP_READ (0x0C)
+#define STRAP_READ_USE_RMII_EN_ BIT(23)
#define STRAP_READ_USE_SGMII_EN_ BIT(22)
+#define STRAP_READ_RMII_EN_ BIT(7)
#define STRAP_READ_SGMII_EN_ BIT(6)
#define STRAP_READ_SGMII_REFCLK_ BIT(5)
#define STRAP_READ_SGMII_2_5G_ BIT(4)
@@ -1071,6 +1073,7 @@ struct lan743x_adapter {
struct lan743x_rx rx[LAN743X_USED_RX_CHANNELS];
bool is_pci11x1x;
bool is_sgmii_en;
+ bool is_rmii_en;
/* protect ethernet syslock */
spinlock_t eth_syslock_spinlock;
bool eth_syslock_en;
--
2.34.1
next prev parent reply other threads:[~2026-05-26 15:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-26 15:40 [PATCH net-next v2 0/2] net: lan743x: add RMII support for PCI11x1x Thangaraj Samynathan
2026-05-26 15:40 ` Thangaraj Samynathan [this message]
2026-05-26 16:40 ` [PATCH net-next v2 1/2] net: lan743x: add RMII strap status detection " Andrew Lunn
2026-05-26 15:40 ` [PATCH net-next v2 2/2] net: lan743x: add support for RMII interface Thangaraj Samynathan
2026-05-26 16:49 ` Andrew Lunn
2026-05-26 19:59 ` Nicolai Buchwitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260526154054.19829-2-thangaraj.s@microchip.com \
--to=thangaraj.s@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew+netdev@lunn.ch \
--cc=bryan.whitehead@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox