From: Inochi Amaoto <inochiama@gmail.com>
To: Inochi Amaoto <inochiama@gmail.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Yixun Lan <dlan@kernel.org>,
"Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-riscv@lists.infradead.org, spacemit@lists.linux.dev,
linux-kernel@vger.kernel.org, Yixun Lan <dlan@gentoo.org>,
Longbin Li <looong.bin@gmail.com>
Subject: [PATCH net] net: stmmac: dwmac-spacemit: Fix wrong ctrl register definition
Date: Thu, 18 Jun 2026 14:41:43 +0800 [thread overview]
Message-ID: <20260618064143.1102179-1-inochiama@gmail.com> (raw)
There register layout of the phy ctrl register has something wrong,
fix it to match the right layout
Fixes: 30f0ba420ed3 ("net: stmmac: Add glue layer for Spacemit K3 SoC")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-spacemit.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
index 223754cc5c79..6feffaa3ef3a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
@@ -18,10 +18,12 @@
#include "stmmac_platform.h"
/* ctrl register bits */
-#define CTRL_PHY_INTF_RGMII BIT(3)
-#define CTRL_PHY_INTF_MII BIT(4)
-#define CTRL_WAKE_IRQ_EN BIT(9)
-#define CTRL_PHY_IRQ_EN BIT(12)
+#define CTRL_PHY_INTF_MODE GENMASK(4, 3)
+#define CTRL_PHY_INTF_RMII FIELD_PREP(CTRL_PHY_INTF_MODE, 0)
+#define CTRL_PHY_INTF_RGMII FIELD_PREP(CTRL_PHY_INTF_MODE, 1)
+#define CTRL_PHY_INTF_MII FIELD_PREP(CTRL_PHY_INTF_MODE, 3)
+#define CTRL_PHY_IRQ_EN BIT(9)
+#define CTRL_WAKE_IRQ_EN BIT(12)
/* dline register bits */
#define RGMII_RX_DLINE_EN BIT(0)
@@ -118,7 +120,7 @@ static void spacemit_get_interfaces(struct stmmac_priv *priv, void *bsp_priv,
static int spacemit_set_phy_intf_sel(void *bsp_priv, u8 phy_intf_sel)
{
- unsigned int mask = CTRL_PHY_INTF_MII | CTRL_PHY_INTF_RGMII;
+ unsigned int mask = CTRL_PHY_INTF_MODE;
struct spacmit_dwmac *dwmac = bsp_priv;
unsigned int val = 0;
@@ -128,6 +130,7 @@ static int spacemit_set_phy_intf_sel(void *bsp_priv, u8 phy_intf_sel)
break;
case PHY_INTF_SEL_RMII:
+ val = CTRL_PHY_INTF_RMII;
break;
case PHY_INTF_SEL_RGMII:
--
2.54.0
next reply other threads:[~2026-06-18 6:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-18 6:41 Inochi Amaoto [this message]
2026-06-18 7:03 ` [PATCH net] net: stmmac: dwmac-spacemit: Fix wrong ctrl register definition Maxime Chevallier
2026-06-18 7:12 ` Inochi Amaoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260618064143.1102179-1-inochiama@gmail.com \
--to=inochiama@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=dlan@gentoo.org \
--cc=dlan@kernel.org \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=looong.bin@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox