* [PATCH next] net: phylink: print correct c45 phy id when missing PHY driver
@ 2026-06-20 13:00 Aleksander Jan Bajkowski
0 siblings, 0 replies; only message in thread
From: Aleksander Jan Bajkowski @ 2026-06-20 13:00 UTC (permalink / raw)
To: linux, andrew, hkallweit1, davem, edumazet, kuba, pabeni,
rmk+kernel, vladimir.oltean, netdev, linux-kernel
Cc: Aleksander Jan Bajkowski
If no PHY driver is found, `phy_id` is returned. `phy_id` holds the c22 ID.
Modules with a rollball bridge support only c45 transfers. The c45 IDs are
stored in the `c45_ids` structure. In the current code these modules report
an ID 0x00000000. This may lead users to mistakenly conclude that the
rollball bridge isn't properly implemented in their SFP module. This patch
fixes the wrong IDs for c45 modules when a driver cannot be found.
Tested on Fiberstore SFP-GB-BE-T (C22) and ONTi ONT-C1TE-R05 (Rollball).
Before:
[ 2440.373985] mtk_soc_eth 15100000.ethernet sfp-lan: PHY i2c:sfp2:11 (id 0x00000000) has no driver loaded
[ 2440.383385] mtk_soc_eth 15100000.ethernet sfp-lan: Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY
[ 2440.395274] sfp sfp2: sfp_add_phy failed: -EINVAL
After:
[ 82.573700] mtk_soc_eth 15100000.ethernet sfp-lan: PHY i2c:sfp2:11 (id 0x001cc898) has no driver loaded
[ 82.583098] mtk_soc_eth 15100000.ethernet sfp-lan: Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY
[ 82.594996] sfp sfp2: sfp_add_phy failed: -EINVAL
Fixes: ffcbfb5f9779 ("net: phylink: improve phylink_sfp_config_phy() error message with missing PHY driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
drivers/net/phy/phylink.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 087ac63f9193..7d7595158bf9 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -3917,13 +3917,30 @@ static void phylink_sfp_link_up(void *upstream)
phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_LINK);
}
+static u32 phylink_get_phy_id(struct phy_device *phy)
+{
+ if (phy->is_c45) {
+ const int num_ids = ARRAY_SIZE(phy->c45_ids.device_ids);
+ int i;
+
+ for (i = 1; i < num_ids; i++) {
+ if (phy->c45_ids.mmds_present & BIT(i))
+ return (phy->c45_ids.device_ids[i]);
+ }
+
+ return 0;
+ } else {
+ return phy->phy_id;
+ }
+}
+
static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
{
struct phylink *pl = upstream;
if (!phy->drv) {
- phylink_err(pl, "PHY %s (id 0x%.8lx) has no driver loaded\n",
- phydev_name(phy), (unsigned long)phy->phy_id);
+ phylink_err(pl, "PHY %s (id 0x%.8x) has no driver loaded\n",
+ phydev_name(phy), phylink_get_phy_id(phy));
phylink_err(pl, "Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY\n");
return -EINVAL;
}
--
2.53.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-06-20 13:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-20 13:00 [PATCH next] net: phylink: print correct c45 phy id when missing PHY driver Aleksander Jan Bajkowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox