[PATCH 1/2 net-next,v1] i40e: move ATR sample rate from ring to PF level

[PATCH 1/2 net-next,v1] i40e: move ATR sample rate from ring to PF level

[mheib]

From: Mohammad Heib <mheib@redhat.com>

The ATR sample rate is currently stored per-ring and initialized when each
TX ring is configured. Since the sample rate is a global policy that
applies uniformly across all rings, it makes more sense to store it at
the PF level.

Move atr_sample_rate from struct i40e_ring to struct i40e_pf and initialize
it once during i40e_sw_init(). Update i40e_atr() to reference the PF-level
field. Change atr_count from u8 to u32 to match the sample rate type.

Signed-off-by: Mohammad Heib <mheib@redhat.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h      | 1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++------
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++--
 drivers/net/ethernet/intel/i40e/i40e_txrx.h | 3 +--
 4 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 1b6a8fbaa648..88eb40ee45f0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -487,6 +487,7 @@ struct i40e_pf {
 	u16 rss_size_max;          /* HW defined max RSS queues */
 	u16 fdir_pf_filter_count;  /* num of guaranteed filters for this PF */
 	u16 num_alloc_vsi;         /* num VSIs this driver supports */
+	u32 atr_sample_rate;
 	bool wol_en;
 
 	struct hlist_head fdir_filter_list;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d59750c490f4..9695d160bc59 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3457,12 +3457,7 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)
 		ring->xsk_pool = i40e_xsk_pool(ring);
 
 	/* some ATR related tx ring init */
-	if (test_bit(I40E_FLAG_FD_ATR_ENA, vsi->back->flags)) {
-		ring->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
-		ring->atr_count = 0;
-	} else {
-		ring->atr_sample_rate = 0;
-	}
+	ring->atr_count = 0;
 
 	/* configure XPS */
 	i40e_config_xps_tx_ring(ring);
@@ -12745,6 +12740,8 @@ static int i40e_sw_init(struct i40e_pf *pf)
 		}
 	}
 
+	pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
+
 	if ((pf->hw.func_caps.fd_filters_guaranteed > 0) ||
 	    (pf->hw.func_caps.fd_filters_best_effort > 0)) {
 		set_bit(I40E_FLAG_FD_ATR_ENA, pf->flags);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 61525ab7d21e..da94cb2ce94d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2882,7 +2882,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 		return;
 
 	/* if sampling is disabled do nothing */
-	if (!tx_ring->atr_sample_rate)
+	if (!pf->atr_sample_rate)
 		return;
 
 	/* Currently only IPv4/IPv6 with TCP is supported */
@@ -2934,7 +2934,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	if (!th->fin &&
 	    !th->syn &&
 	    !th->rst &&
-	    (tx_ring->atr_count < tx_ring->atr_sample_rate))
+	    (tx_ring->atr_count < pf->atr_sample_rate))
 		return;
 
 	tx_ring->atr_count = 0;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index bb741ff3e5f2..be587f804e7a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -372,8 +372,7 @@ struct i40e_ring {
 	u16 next_to_clean;
 	u16 xdp_tx_active;
 
-	u8 atr_sample_rate;
-	u8 atr_count;
+	u32 atr_count;
 
 	bool ring_active;		/* is ring online or not */
 	bool arm_wb;		/* do something to arm write back */
-- 
2.53.0

[PATCH 2/2 net-next,v2] i40e: add devlink parameter for Flow Director ATR sample rate

[mheib]

From: Mohammad Heib <mheib@redhat.com>

The i40e driver uses Flow Director ATR to periodically update flow
steering information for active TCP flows. The update frequency is
currently controlled by I40E_DEFAULT_ATR_SAMPLE_RATE and is fixed at
driver build time.

On systems with a large number of queues and high-rate TCP workloads,
the default sampling interval can result in frequent Flow Director
reprogramming for long-lived flows.

The amount of TCP packet reordering observed on some systems is
sensitive to the ATR sampling interval. Increasing the interval reduces
Flow Director programming activity and can significantly reduce the
associated reordering.

Since the optimal sampling interval depends on the workload and system
configuration, a single fixed value is not suitable for all deployments.

Add a devlink parameter to allow administrators to tune the ATR sample
rate at runtime without rebuilding the driver or disabling ATR
functionality entirely.

Signed-off-by: Mohammad Heib <mheib@redhat.com>
---
 Documentation/networking/devlink/i40e.rst     | 20 +++++++++++
 .../net/ethernet/intel/i40e/i40e_devlink.c    | 36 +++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/Documentation/networking/devlink/i40e.rst b/Documentation/networking/devlink/i40e.rst
index 51c887f0dc83..2cea98b631ba 100644
--- a/Documentation/networking/devlink/i40e.rst
+++ b/Documentation/networking/devlink/i40e.rst
@@ -40,6 +40,26 @@ Parameters
 
         The default value is ``0`` (internal calculation is used).
 
+.. list-table:: Driver specific parameters implemented
+    :widths: 5 5 90
+
+    * - Name
+      - Mode
+      - Description
+    * - ``atr_sample_rate``
+      - runtime
+      - Controls how frequently Flow Director ATR updates flow steering
+        information for active TCP flows.
+
+        ATR programs Flow Director entries based on sampled transmitted
+        packets. The sampling interval is specified as the number of
+        transmitted packets between ATR updates.
+
+        Lower values increase Flow Director programming activity, while
+        higher values reduce the update frequency.
+
+        Setting to ``0`` disables ATR sampling (no filters will be programmed)
+        The default value is ``20``.
 
 Info versions
 =============
diff --git a/drivers/net/ethernet/intel/i40e/i40e_devlink.c b/drivers/net/ethernet/intel/i40e/i40e_devlink.c
index 229179ccc131..cf487efdd803 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_devlink.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_devlink.c
@@ -33,12 +33,48 @@ static int i40e_max_mac_per_vf_get(struct devlink *devlink,
 	return 0;
 }
 
+static int i40e_atr_sample_rate_set(struct devlink *devlink,
+				    u32 id,
+				    struct devlink_param_gset_ctx *ctx,
+				    struct netlink_ext_ack *extack)
+{
+	struct i40e_pf *pf = devlink_priv(devlink);
+	u32 sample_rate = ctx->val.vu32;
+
+	pf->atr_sample_rate = sample_rate;
+	return 0;
+}
+
+static int i40e_atr_sample_rate_get(struct devlink *devlink,
+				    u32 id,
+				    struct devlink_param_gset_ctx *ctx,
+				    struct netlink_ext_ack *extack)
+{
+	struct i40e_pf *pf = devlink_priv(devlink);
+
+	ctx->val.vu32 = pf->atr_sample_rate;
+
+	return 0;
+}
+
+enum i40e_dl_param_id {
+	I40E_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
+	I40E_DEVLINK_PARAM_ID_ATR_SAMPLE_RATE,
+};
+
 static const struct devlink_param i40e_dl_params[] = {
 	DEVLINK_PARAM_GENERIC(MAX_MAC_PER_VF,
 			      BIT(DEVLINK_PARAM_CMODE_RUNTIME),
 			      i40e_max_mac_per_vf_get,
 			      i40e_max_mac_per_vf_set,
 			      NULL),
+	DEVLINK_PARAM_DRIVER(I40E_DEVLINK_PARAM_ID_ATR_SAMPLE_RATE,
+			     "atr_sample_rate",
+			     DEVLINK_PARAM_TYPE_U32,
+			     BIT(DEVLINK_PARAM_CMODE_RUNTIME),
+			     i40e_atr_sample_rate_get,
+			     i40e_atr_sample_rate_set,
+			     NULL),
 };
 
 static void i40e_info_get_dsn(struct i40e_pf *pf, char *buf, size_t len)
-- 
2.53.0