[PATCH net-next] selftests/xsk: preserve UMEM view in bidi test

[PATCH net-next] selftests/xsk: preserve UMEM view in bidi test

[Maciej Fijalkowski]

The UMEM state refactor made __send_pkts() use xsk->umem for Tx
address generation. At the same time, the shared-UMEM Tx setup copies the
Rx UMEM state into a Tx-local state object and resets base_addr and
next_buffer before configuring the Tx socket.

Passing that Tx-local object to xsk_configure() makes xsk->umem point to
the zero-based Tx allocator state. This breaks the BIDIRECTIONAL test once
the roles are switched: the same socket is then used for Rx validation, but
received descriptors from the other logical UMEM half are checked against
base_addr == 0. With the new UMEM bounds check, a valid address such as
base_addr + XDP_PACKET_HEADROOM is rejected as being outside the UMEM
window.

Keep xsk->umem as the shared/Rx UMEM view used for socket configuration
and Rx validation. Use the ifobject-local UMEM copy only for Tx descriptor
address generation, preserving the BIDIRECTIONAL test's intent of using
the proper logical UMEM half after the direction switch.

Fixes: b17631032769 ("selftests/xsk: Move UMEM state from ifobject to xsk_socket_info")
Signed-off-by: Maciej Fijalkowski maciej.fijalkowski@intel.com
---
 tools/testing/selftests/bpf/prog_tests/test_xsk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/test_xsk.c b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
index d8a1c0d40e5a..50a8dbacb63d 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_xsk.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
@@ -1169,8 +1169,8 @@ static int receive_pkts(struct test_spec *test)
 static int __send_pkts(struct ifobject *ifobject, struct xsk_socket_info *xsk, bool timeout)
 {
 	u32 i, idx = 0, valid_pkts = 0, valid_frags = 0, buffer_len;
+	struct xsk_umem_info *umem = ifobject->xsk_arr[0].umem_real;
 	struct pkt_stream *pkt_stream = xsk->pkt_stream;
-	struct xsk_umem_info *umem = xsk->umem;
 	bool use_poll = ifobject->use_poll;
 	struct pollfd fds = { };
 	int ret;
@@ -1524,7 +1524,7 @@ static int thread_common_ops_tx(struct test_spec *test, struct ifobject *ifobjec
 	umem_tx->base_addr = 0;
 	umem_tx->next_buffer = 0;
 
-	ret = xsk_configure(test, ifobject, umem_tx, true);
+	ret = xsk_configure(test, ifobject, umem_rx, true);
 	if (ret)
 		return ret;
 	ifobject->xsk = &ifobject->xsk_arr[0];
-- 
2.43.0

RE: [PATCH net-next] selftests/xsk: preserve UMEM view in bidi test

[Vyavahare, Tushar]

> -----Original Message-----
> From: Fijalkowski, Maciej <maciej.fijalkowski@intel.com>
> Sent: Tuesday, June 23, 2026 2:40 PM
> To: netdev@vger.kernel.org
> Cc: bpf@vger.kernel.org; Karlsson, Magnus <magnus.karlsson@intel.com>;
> stfomichev@gmail.com; kuba@kernel.org; pabeni@redhat.com;
> horms@kernel.org; Vyavahare, Tushar <tushar.vyavahare@intel.com>;
> kerneljasonxing@gmail.com; Fijalkowski, Maciej
> <maciej.fijalkowski@intel.com>
> Subject: [PATCH net-next] selftests/xsk: preserve UMEM view in bidi test
> 
> The UMEM state refactor made __send_pkts() use xsk->umem for Tx address
> generation. At the same time, the shared-UMEM Tx setup copies the Rx
> UMEM state into a Tx-local state object and resets base_addr and next_buffer
> before configuring the Tx socket.
> 
> Passing that Tx-local object to xsk_configure() makes xsk->umem point to the
> zero-based Tx allocator state. This breaks the BIDIRECTIONAL test once the
> roles are switched: the same socket is then used for Rx validation, but received
> descriptors from the other logical UMEM half are checked against base_addr
> == 0. With the new UMEM bounds check, a valid address such as base_addr +
> XDP_PACKET_HEADROOM is rejected as being outside the UMEM window.
> 
> Keep xsk->umem as the shared/Rx UMEM view used for socket configuration
> and Rx validation. Use the ifobject-local UMEM copy only for Tx descriptor
> address generation, preserving the BIDIRECTIONAL test's intent of using the
> proper logical UMEM half after the direction switch.
> 
> Fixes: b17631032769 ("selftests/xsk: Move UMEM state from ifobject to
> xsk_socket_info")
> Signed-off-by: Maciej Fijalkowski maciej.fijalkowski@intel.com

Reviewed-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Tested-by: Tushar Vyavahare <tushar.vyavahare@intel.com>

> ---
>  tools/testing/selftests/bpf/prog_tests/test_xsk.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/tools/testing/selftests/bpf/prog_tests/test_xsk.c
> b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
> index d8a1c0d40e5a..50a8dbacb63d 100644
> --- a/tools/testing/selftests/bpf/prog_tests/test_xsk.c
> +++ b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
> @@ -1169,8 +1169,8 @@ static int receive_pkts(struct test_spec *test)  static
> int __send_pkts(struct ifobject *ifobject, struct xsk_socket_info *xsk, bool
> timeout)  {
>  	u32 i, idx = 0, valid_pkts = 0, valid_frags = 0, buffer_len;
> +	struct xsk_umem_info *umem = ifobject->xsk_arr[0].umem_real;
>  	struct pkt_stream *pkt_stream = xsk->pkt_stream;
> -	struct xsk_umem_info *umem = xsk->umem;
>  	bool use_poll = ifobject->use_poll;
>  	struct pollfd fds = { };
>  	int ret;
> @@ -1524,7 +1524,7 @@ static int thread_common_ops_tx(struct test_spec
> *test, struct ifobject *ifobjec
>  	umem_tx->base_addr = 0;
>  	umem_tx->next_buffer = 0;
> 
> -	ret = xsk_configure(test, ifobject, umem_tx, true);
> +	ret = xsk_configure(test, ifobject, umem_rx, true);
>  	if (ret)
>  		return ret;
>  	ifobject->xsk = &ifobject->xsk_arr[0];
> --
> 2.43.0

Re: [PATCH net-next] selftests/xsk: preserve UMEM view in bidi test

[Jakub Kicinski]

On Tue, 23 Jun 2026 11:10:08 +0200 Maciej Fijalkowski wrote:
> Subject: [PATCH net-next] selftests/xsk: preserve UMEM view in bidi test

Do you want it in net? Either way - we'll need a rebase

> Signed-off-by: Maciej Fijalkowski maciej.fijalkowski@intel.com

missing <> around the email