Netdev List
 help / color / mirror / Atom feed
* [PATCH net-next v3 0/3] net: pse-pd: decouple controller lookup from MDIO probe
@ 2026-06-26 16:59 Carlo Szelinsky
  2026-06-26 16:59 ` [PATCH net-next v3 1/3] net: pse-pd: add notifier chain for controller lifecycle events Carlo Szelinsky
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Carlo Szelinsky @ 2026-06-26 16:59 UTC (permalink / raw)
  To: Oleksij Rempel, Kory Maincent, Andrew Lunn, Heiner Kallweit,
	Russell King, David S . Miller, Eric Dumazet, Jakub Kicinski,
	Paolo Abeni
  Cc: Corey Leavitt, Jonas Jelonek, Simon Horman, netdev, linux-kernel,
	Carlo Szelinsky

This is v3 of Corey's series [1]. It takes the PSE controller lookup out
of the MDIO probe path, so a modular PSE driver no longer makes the
PHY/DSA probe spin on -EPROBE_DEFER until the PSE module loads.

v2 was four patches. The first one (a regulator handle fix) is a
self-contained bug fix, so on Jakub's suggestion it is going to net on
its own [2] and is not part of this series. The three patches here are
the notifier rework and target net-next. net-next was closed for the
merge window when v2 was posted; it is open again now, so here they are.

How it works: pse_core gets a notifier chain (REGISTERED / UNREGISTERED).
The phy layer subscribes, owns phydev->psec, and attaches the PSE handle
when the controller shows up instead of during probe. fwnode_mdio loses
its PSE awareness, so no -EPROBE_DEFER leaves it and the probe-retry loop
is gone.

Tested on a Realtek rtl93xx PoE switch with two HS104 PSE controllers on
i2c:

 - clean boot, no probe-retry loop, no watchdog reset
 - 10G SFP+ port: module hotplug works, no deadlock
 - ethtool --set-pse enable/disable cuts and restores power to a PD
 - i2c unbind -> rmmod -> modprobe: PSE detaches on unbind and re-attaches
   on reload with power restored, no reboot. No lockdep splats.

Tested-by: Carlo Szelinsky <github@szelinsky.de>

Changes in v3:
 - Drop patch 1 (regulator handle fix); it goes to net separately [2].
 - Rebase on current net-next. No code changes to the three patches.

v1 was an RFC by Corey [3].

[1] https://lore.kernel.org/netdev/20260620112440.1734404-1-github@szelinsky.de/
[2] https://lore.kernel.org/netdev/20260624204017.2752934-1-github@szelinsky.de/
[3] https://lore.kernel.org/netdev/20260423-pse-notifier-decouple-v1-0-86ed750a9d62@leavitt.info/

Corey Leavitt (3):
  net: pse-pd: add notifier chain for controller lifecycle events
  net: pse-pd: fire lifecycle events on controller register/unregister
  net: phy: own phydev->psec via PSE notifier and remove fwnode_mdio
    hook

 drivers/net/mdio/fwnode_mdio.c |  34 -------
 drivers/net/phy/phy_device.c   | 168 +++++++++++++++++++++++++++++++--
 drivers/net/phy/sfp.c          |   2 +-
 drivers/net/pse-pd/pse_core.c  |  54 +++++++++++
 include/linux/phy.h            |   2 +
 include/linux/pse-pd/pse.h     |  41 ++++++++
 6 files changed, 258 insertions(+), 43 deletions(-)


base-commit: 805185b7c7a1069e407b6f7b3bc98e44d415f484
-- 
2.43.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2026-06-26 17:00 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-26 16:59 [PATCH net-next v3 0/3] net: pse-pd: decouple controller lookup from MDIO probe Carlo Szelinsky
2026-06-26 16:59 ` [PATCH net-next v3 1/3] net: pse-pd: add notifier chain for controller lifecycle events Carlo Szelinsky
2026-06-26 16:59 ` [PATCH net-next v3 2/3] net: pse-pd: fire lifecycle events on controller register/unregister Carlo Szelinsky
2026-06-26 16:59 ` [PATCH net-next v3 3/3] net: phy: own phydev->psec via PSE notifier and remove fwnode_mdio hook Carlo Szelinsky

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox