From: <alejandro.lucero-palau@amd.com>
To: <netdev@vger.kernel.org>, <kuba@kernel.org>,
<davem@davemloft.net>, <edumazet@google.com>, <pabeni@redhat.com>,
<horms@kernel.org>, <dave.jiang@intel.com>
Cc: Alejandro Lucero <alucerop@amd.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Edward Cree <ecree.xilinx@gmail.com>,
"Alison Schofield" <alison.schofield@intel.com>,
Dan Williams <dan.j.williams@intel.com>
Subject: [PATCH net 3/7] sfc: add cxl support
Date: Wed, 1 Jul 2026 12:38:01 +0100 [thread overview]
Message-ID: <20260701113805.14072-4-alejandro.lucero-palau@amd.com> (raw)
In-Reply-To: <20260701113805.14072-1-alejandro.lucero-palau@amd.com>
From: Alejandro Lucero <alucerop@amd.com>
Add CXL initialization based on new CXL API for accel drivers and make
it dependent on kernel CXL configuration.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260630151346.31201-2-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
drivers/net/ethernet/sfc/Kconfig | 9 +++++
drivers/net/ethernet/sfc/Makefile | 1 +
drivers/net/ethernet/sfc/efx.c | 16 ++++++++-
drivers/net/ethernet/sfc/efx_cxl.c | 50 +++++++++++++++++++++++++++
drivers/net/ethernet/sfc/efx_cxl.h | 29 ++++++++++++++++
drivers/net/ethernet/sfc/net_driver.h | 8 +++++
6 files changed, 112 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/sfc/efx_cxl.c
create mode 100644 drivers/net/ethernet/sfc/efx_cxl.h
diff --git a/drivers/net/ethernet/sfc/Kconfig b/drivers/net/ethernet/sfc/Kconfig
index c4c43434f314..979f2801e2a8 100644
--- a/drivers/net/ethernet/sfc/Kconfig
+++ b/drivers/net/ethernet/sfc/Kconfig
@@ -66,6 +66,15 @@ config SFC_MCDI_LOGGING
Driver-Interface) commands and responses, allowing debugging of
driver/firmware interaction. The tracing is actually enabled by
a sysfs file 'mcdi_logging' under the PCI device.
+config SFC_CXL
+ bool "Solarflare SFC9100-family CXL support"
+ depends on SFC && CXL_BUS >= SFC
+ default SFC
+ help
+ This enables SFC CXL support if the kernel is configuring CXL for
+ using CTPIO with CXL.mem. The SFC device with CXL support and
+ with a CXL-aware firmware can be used for minimizing latencies
+ when sending through CTPIO.
source "drivers/net/ethernet/sfc/falcon/Kconfig"
source "drivers/net/ethernet/sfc/siena/Kconfig"
diff --git a/drivers/net/ethernet/sfc/Makefile b/drivers/net/ethernet/sfc/Makefile
index d99039ec468d..bb0f1891cde6 100644
--- a/drivers/net/ethernet/sfc/Makefile
+++ b/drivers/net/ethernet/sfc/Makefile
@@ -13,6 +13,7 @@ sfc-$(CONFIG_SFC_SRIOV) += sriov.o ef10_sriov.o ef100_sriov.o ef100_rep.o \
mae.o tc.o tc_bindings.o tc_counters.o \
tc_encap_actions.o tc_conntrack.o
+sfc-$(CONFIG_SFC_CXL) += efx_cxl.o
obj-$(CONFIG_SFC) += sfc.o
obj-$(CONFIG_SFC_FALCON) += falcon/
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 8f136a11d396..61cbb6cfc360 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -34,6 +34,7 @@
#include "selftest.h"
#include "sriov.h"
#include "efx_devlink.h"
+#include "efx_cxl.h"
#include "mcdi_port_common.h"
#include "mcdi_pcol.h"
@@ -981,12 +982,14 @@ static void efx_pci_remove(struct pci_dev *pci_dev)
efx_pci_remove_main(efx);
efx_fini_io(efx);
+
+ probe_data = container_of(efx, struct efx_probe_data, efx);
+
pci_dbg(efx->pci_dev, "shutdown successful\n");
efx_fini_devlink_and_unlock(efx);
efx_fini_struct(efx);
free_netdev(efx->net_dev);
- probe_data = container_of(efx, struct efx_probe_data, efx);
kfree(probe_data);
};
@@ -1190,6 +1193,17 @@ static int efx_pci_probe(struct pci_dev *pci_dev,
if (rc)
goto fail2;
+ /* A successful cxl initialization implies a CXL region created to be
+ * used for PIO buffers. If there is no CXL support legacy PIO buffers
+ * defined at specific PCI BAR regions will be used. If there is CXL
+ * support and the cxl initialization fails, the driver probe fails.
+ */
+ rc = efx_cxl_init(probe_data);
+ if (rc) {
+ pci_err(pci_dev, "CXL initialization failed with error %d\n", rc);
+ goto fail3;
+ }
+
rc = efx_pci_probe_post_io(efx);
if (rc) {
/* On failure, retry once immediately.
diff --git a/drivers/net/ethernet/sfc/efx_cxl.c b/drivers/net/ethernet/sfc/efx_cxl.c
new file mode 100644
index 000000000000..be252af972ab
--- /dev/null
+++ b/drivers/net/ethernet/sfc/efx_cxl.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/****************************************************************************
+ *
+ * Driver for AMD network controllers and boards
+ * Copyright (C) 2025, Advanced Micro Devices, Inc.
+ */
+
+#include <linux/pci.h>
+
+#include "net_driver.h"
+#include "efx_cxl.h"
+
+#define EFX_CTPIO_BUFFER_SIZE SZ_256M
+
+int efx_cxl_init(struct efx_probe_data *probe_data)
+{
+ struct efx_nic *efx = &probe_data->efx;
+ struct pci_dev *pci_dev = efx->pci_dev;
+ struct efx_cxl *cxl;
+ u16 dvsec;
+
+ /* Is the device configured with and using CXL? */
+ if (!pcie_is_cxl(pci_dev))
+ return 0;
+
+ dvsec = pci_find_dvsec_capability(pci_dev, PCI_VENDOR_ID_CXL,
+ PCI_DVSEC_CXL_DEVICE);
+ if (!dvsec) {
+ pci_info(pci_dev, "CXL_DVSEC_PCIE_DEVICE capability not found\n");
+ return 0;
+ }
+
+ pci_dbg(pci_dev, "CXL_DVSEC_PCIE_DEVICE capability found\n");
+
+ /* Create a cxl_dev_state embedded in the cxl struct using cxl core api
+ * specifying no mbox available.
+ */
+ cxl = devm_cxl_dev_state_create(&pci_dev->dev, CXL_DEVTYPE_DEVMEM,
+ pci_get_dsn(pci_dev), dvsec,
+ struct efx_cxl, cxlds, false);
+
+ if (!cxl)
+ return -ENOMEM;
+
+ probe_data->cxl = cxl;
+
+ return 0;
+}
+
+MODULE_IMPORT_NS("CXL");
diff --git a/drivers/net/ethernet/sfc/efx_cxl.h b/drivers/net/ethernet/sfc/efx_cxl.h
new file mode 100644
index 000000000000..04e46278464d
--- /dev/null
+++ b/drivers/net/ethernet/sfc/efx_cxl.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/****************************************************************************
+ * Driver for AMD network controllers and boards
+ * Copyright (C) 2025, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_CXL_H
+#define EFX_CXL_H
+
+#ifdef CONFIG_SFC_CXL
+
+#include <cxl/cxl.h>
+
+struct efx_probe_data;
+
+struct efx_cxl {
+ struct cxl_dev_state cxlds;
+ struct cxl_memdev *cxlmd;
+};
+
+int efx_cxl_init(struct efx_probe_data *probe_data);
+#else
+static inline int efx_cxl_init(struct efx_probe_data *probe_data) { return 0; }
+#endif
+#endif
diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index b98c259f672d..563e6a6e85f1 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -1197,14 +1197,22 @@ struct efx_nic {
atomic_t n_rx_noskb_drops;
};
+#ifdef CONFIG_SFC_CXL
+struct efx_cxl;
+#endif
+
/**
* struct efx_probe_data - State after hardware probe
* @pci_dev: The PCI device
* @efx: Efx NIC details
+ * @cxl: details of related cxl objects
*/
struct efx_probe_data {
struct pci_dev *pci_dev;
struct efx_nic efx;
+#ifdef CONFIG_SFC_CXL
+ struct efx_cxl *cxl;
+#endif
};
static inline struct efx_nic *efx_netdev_priv(struct net_device *dev)
--
2.34.1
next prev parent reply other threads:[~2026-07-01 10:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 11:37 [PATCH net 0/7] pull request: sfc 2026-07-01 alejandro.lucero-palau
2026-07-01 11:37 ` [PATCH net 1/7] cxl: Support Type2 cxl regs mapping alejandro.lucero-palau
2026-07-01 11:38 ` [PATCH net 2/7] cxl: Support dpa without a mailbox alejandro.lucero-palau
2026-07-01 11:38 ` alejandro.lucero-palau [this message]
2026-07-01 11:38 ` [PATCH net 4/7] sfc: Map cxl regs alejandro.lucero-palau
2026-07-01 11:38 ` [PATCH net 5/7] sfc: Initialize cxl dpa alejandro.lucero-palau
2026-07-01 11:38 ` [PATCH net 6/7] sfc: obtain and map cxl range using devm_cxl_probe_mem alejandro.lucero-palau
2026-07-01 11:38 ` [PATCH net 7/7] sfc: support pio mapping based on cxl alejandro.lucero-palau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260701113805.14072-4-alejandro.lucero-palau@amd.com \
--to=alejandro.lucero-palau@amd.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=alucerop@amd.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=davem@davemloft.net \
--cc=ecree.xilinx@gmail.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox