[PATCH net 01/19] can: vxcan: Kconfig: fix description stating no local echo provided

[Marc Kleine-Budde <mkl@pengutronix.de>]

From: Alexander Hölzl <alexander.hoelzl@gmx.net>

The Kconfig description of the vxcan kernel module erroneously states the
the vxcan interface does not provide a local echo of sent can frames.
However this behavior changed in commit 259bdba27e32 ("vxcan: enable local
echo for sent CAN frames") and vxcan interfaces now provide a local echo.

Change the description of the vxcan module in the Kconfig to reflect this
change.

Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260619090035.17769-1-alexander.hoelzl@gmx.net
[mkl: rephrase patch description]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/Kconfig | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index e4058708ae68..a8fad6fe5302 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -40,11 +40,8 @@ config CAN_VXCAN
 	  When one end receives the packet it appears on its pair and vice
 	  versa. The vxcan can be used for cross namespace communication.
 
-	  In opposite to vcan loopback devices the vxcan only forwards CAN
-	  frames to its pair and does *not* provide a local echo of sent
-	  CAN frames. To disable a potential echo in af_can.c the vxcan driver
-	  announces IFF_ECHO in the interface flags. To have a clean start
-	  in each namespace the CAN GW hop counter is set to zero.
+	  To have a clean start in each namespace the CAN GW hop counter is
+	  set to zero.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called vxcan.

base-commit: 3f1f755366687d051174739fb99f7d560202f60b
-- 
2.53.0