From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de, Fan Wu <fanwu01@zju.edu.cn>,
stable@vger.kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH net 02/19] can: esd_usb: kill anchored URBs before freeing netdevs
Date: Thu, 16 Jul 2026 17:47:27 +0200 [thread overview]
Message-ID: <20260716155528.809908-3-mkl@pengutronix.de> (raw)
In-Reply-To: <20260716155528.809908-1-mkl@pengutronix.de>
From: Fan Wu <fanwu01@zju.edu.cn>
esd_usb_disconnect() frees each CAN netdev with free_candev() inside
its per-netdev loop and only calls unlink_all_urbs(dev) afterwards.
The per-netdev private data (struct esd_usb_net_priv) is embedded in
the net_device allocation returned by alloc_candev(), so once
free_candev() has run, dev->nets[i] points to freed memory.
unlink_all_urbs() then dereferences the freed dev->nets[i] to kill the
per-netdev TX anchor (usb_kill_anchored_urbs(&priv->tx_submitted)),
clear active_tx_jobs, and reset priv->tx_contexts[].
Reorder the teardown so the anchored URBs are killed before the netdevs
are freed, matching other CAN/USB drivers in the same directory such as
ems_usb, usb_8dev and mcba_usb, which unregister, then unlink, then
free: unregister the netdevs first (which stops their TX queues), call
unlink_all_urbs(dev) once, then free the netdevs.
This issue was found by an in-house static analysis tool.
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.5
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260709164159.497640-1-fanwu01@zju.edu.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/usb/esd_usb.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index d257440fa01f..f41d4a0d140f 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -1390,10 +1390,13 @@ static void esd_usb_disconnect(struct usb_interface *intf)
netdev = dev->nets[i]->netdev;
netdev_info(netdev, "unregister\n");
unregister_netdev(netdev);
- free_candev(netdev);
}
}
unlink_all_urbs(dev);
+ for (i = 0; i < dev->net_count; i++) {
+ if (dev->nets[i])
+ free_candev(dev->nets[i]->netdev);
+ }
kfree(dev);
}
}
--
2.53.0
next prev parent reply other threads:[~2026-07-16 15:56 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-16 15:47 [PATCH net 0/19] pull-request: can 2026-07-16 Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 01/19] can: vxcan: Kconfig: fix description stating no local echo provided Marc Kleine-Budde
2026-07-17 9:50 ` patchwork-bot+netdevbpf
2026-07-16 15:47 ` Marc Kleine-Budde [this message]
2026-07-16 15:47 ` [PATCH net 03/19] can: raw: add locking for raw flags bitfield Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 04/19] can: j1939: fix lockless local-destination check Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 05/19] can: peak: Modification of references to email accounts being deleted Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 06/19] can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 07/19] can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 08/19] can: bcm: add locking when updating filter and timer values Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 09/19] can: bcm: fix CAN frame rx/tx statistics Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 10/19] can: bcm: add missing rcu list annotations and operations Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 11/19] can: bcm: extend bcm_tx_lock usage for data and timer updates Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 12/19] can: bcm: validate frame length in bcm_rx_setup() for RTR replies Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 13/19] can: bcm: add missing device refcount for CAN filter removal Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 14/19] can: bcm: fix stale rx/tx ops after device removal Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 15/19] can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 16/19] can: bcm: track a single source interface for ANYDEV timeout/throttle ops Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 17/19] can: isotp: use unconditional synchronize_rcu() in isotp_release() Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 18/19] can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER Marc Kleine-Budde
2026-07-16 15:47 ` [PATCH net 19/19] can: isotp: serialize TX state transitions under so->rx_lock Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260716155528.809908-3-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=fanwu01@zju.edu.cn \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox