From: Jacob Keller <jacob.e.keller@intel.com>
To: Intel Wired LAN <intel-wired-lan@lists.osuosl.org>
Cc: netdev@vger.kernel.org,
Maciej Machnikowski <maciej.machnikowski@intel.com>,
Anthony Nguyen <anthony.l.nguyen@intel.com>,
Przemyslaw Korba <przemyslaw.korba@intel.com>,
Grzegorz Nitka <grzegorz.nitka@intel.com>,
Petr Oros <poros@redhat.com>,
alexander.nowlin@intel.com, kevin.bross@intel.com,
ranjit.cavatur@intel.com,
Jacob Keller <jacob.e.keller@intel.com>,
Maciek Machnikowski <maciej.machnikowski@intel.com>
Subject: [PATCH iwl-net v2 10/14] ice: wait for in-flight Tx timestamps before flushing the tracker
Date: Tue, 25 Aug 2026 15:53:34 -0700 [thread overview]
Message-ID: <20260825-jk-e825c-minimized-fixes-v2-10-8223f95d26e3@intel.com> (raw)
In-Reply-To: <20260825-jk-e825c-minimized-fixes-v2-0-8223f95d26e3@intel.com>
From: Petr Oros <poros@redhat.com>
ice_ptp_flush_tx_tracker() frees every tracked request, but a request
whose timestamp is still being captured by the PHY at that moment is
freed without touching the PHY entry. The ready bit published shortly
after has no tracked owner, and the PHY does not raise another Tx
timestamp interrupt until every outstanding ready bit is read, so
delivery for the whole quad degrades to the periodic work.
Wait up to 10 ms for in-flight captures to publish their ready bits
before flushing, so the flush clears them together with the rest.
Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Maciek Machnikowski <maciej.machnikowski@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
drivers/net/ethernet/intel/ice/ice_ptp.c | 33 ++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index c535658b30fb..59972de1eda2 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -740,6 +740,37 @@ ice_ptp_alloc_tx_tracker(struct ice_ptp_tx *tx)
return 0;
}
+static void
+ice_ptp_wait_for_tracker_drain(struct ice_pf *pf, struct ice_ptp_tx *tx)
+{
+ unsigned long deadline = jiffies + msecs_to_jiffies(10);
+ struct ice_hw *hw = &pf->hw;
+ u64 tstamp_ready;
+ bool pending;
+ u8 idx;
+
+ if (hw->reset_ongoing)
+ return;
+
+ do {
+ if (ice_get_phy_tx_tstamp_ready(hw, tx->block, &tstamp_ready))
+ return;
+
+ pending = false;
+ for_each_set_bit(idx, tx->in_use, tx->len) {
+ if (!(tstamp_ready & BIT_ULL(idx + tx->offset)))
+ pending = true;
+ }
+ if (!pending)
+ return;
+
+ usleep_range(500, 1000);
+ } while (time_before(jiffies, deadline));
+
+ dev_dbg(ice_pf_to_dev(pf), "Timed out waiting for in-flight Tx timestamps on block %u\n",
+ tx->block);
+}
+
/**
* ice_ptp_flush_tx_tracker - Flush any remaining timestamps from the tracker
* @pf: Board private structure
@@ -756,6 +787,8 @@ ice_ptp_flush_tx_tracker(struct ice_pf *pf, struct ice_ptp_tx *tx)
int err;
u8 idx;
+ ice_ptp_wait_for_tracker_drain(pf, tx);
+
err = ice_get_phy_tx_tstamp_ready(hw, tx->block, &tstamp_ready);
if (err) {
dev_dbg(ice_pf_to_dev(pf), "Failed to get the Tx tstamp ready bitmap for block %u, err %d\n",
--
2.55.0.814.gc42f45431d0f
next prev parent reply other threads:[~2026-08-25 22:55 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-25 22:53 [PATCH iwl-net v2 00/14] ice: E82x: timestamp processing logic fixes Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 01/14] ice: use reference counting and RCU for PTP port access Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 02/14] ice: fix removal of PTP timestamp tracker during reset Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 03/14] ice: set in_use only after preparing Tx timestamp index Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 04/14] ice: E822: keep Tx timestamps disabled during offset calibration Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 05/14] ice: E822: cancel offset verification work during reset preparation Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 06/14] ice: call PTP link change only from link events Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 07/14] ice: E825: stop clearing PHY_REG_TX_OFFSET_READY Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 08/14] ice: E825: clear PHY_REG_TX_MEMORY_STATUS prior to soft reset Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 09/14] ice: E825: perform a soft reset when starting the PHY timer Jacob Keller
2026-08-25 22:53 ` Jacob Keller [this message]
2026-08-25 22:53 ` [PATCH iwl-net v2 11/14] ice: keep Tx timestamp slots tracked until completion or timeout Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 12/14] ice: remove unnecessary discarding of timestamps after clock adjust Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 13/14] ice: skip reading Tx ready bitmap on ports with no timestamps Jacob Keller
2026-08-25 22:53 ` [PATCH iwl-net v2 14/14] ice: don't clear in_use until HW clears ready bitmap Jacob Keller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260825-jk-e825c-minimized-fixes-v2-10-8223f95d26e3@intel.com \
--to=jacob.e.keller@intel.com \
--cc=alexander.nowlin@intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=grzegorz.nitka@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=kevin.bross@intel.com \
--cc=maciej.machnikowski@intel.com \
--cc=netdev@vger.kernel.org \
--cc=poros@redhat.com \
--cc=przemyslaw.korba@intel.com \
--cc=ranjit.cavatur@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox