From: Eric Dumazet <edumazet@google.com>
To: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>,
netdev@vger.kernel.org, eric.dumazet@gmail.com,
Eric Dumazet <edumazet@google.com>,
syzbot+586af68eb819833c2d91@syzkaller.appspotmail.com,
Xuanqiang Luo <xuanqiang.luo@linux.dev>,
Allison Henderson <achender@kernel.org>,
rds-devel@oss.oracle.com
Subject: [PATCH v2 net] net: skbuff: do not leave stale header offsets after pskb_carve()
Date: Tue, 15 Sep 2026 13:04:23 +0000 [thread overview]
Message-ID: <20260915130423.3956471-1-edumazet@google.com> (raw)
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove
the first bytes of a packet and reallocate skb->head.
All the headers that were present before the operation are gone,
but both functions call skb_headers_offset_update(skb, 0), which
is a no-op : skb->mac_header, skb->network_header,
skb->transport_header and skb->csum_start keep their old values and
now describe bytes which are no longer there.
Both helpers size the new head from the old skb_end_offset(), so the
stale offsets still land inside the new allocation. They point past
skb_tail_pointer() though, to bytes that were never initialized.
pskb_carve_inside_nonlinear() is the worst case, because it leaves a
zombie skb with an empty linear part (skb->data ==
skb_tail_pointer(skb), skb_headlen(skb) == 0), while
skb_mac_header_was_set() is still true and skb->mac_header is way
ahead of skb->data.
The only user of pskb_extract() is rds_tcp_data_recv(), and the
carved skb is queued on tinc->ti_skb_list. When the RDS incoming
message is released, rds_tcp_inc_free() calls skb_queue_purge(),
which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is
visible from drop_monitor, which then tries to pull back to the
(bogus) mac header :
skbuff: __skb_pull(len=234)
skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0
end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288
shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5))
csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0)
hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60
------------[ cut here ]------------
kernel BUG at ./include/linux/skbuff.h:2847!
Add skb_carve_reset_headers() to mark the mac and transport headers
as not set, reset the network header, clear skb->mac_len, and drop
a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes
anything).
Invalidate the inner offsets as well. Unlike mac_header and
transport_header they have no "unset" sentinel, so a leftover
non-zero value still looks like a real header. Zero
skb->inner_mac_header, skb->inner_network_header,
skb->inner_transport_header, skb->inner_protocol and
skb->encapsulation, so that all the header state is invalidated in
one place.
v2: fixed an inaccurate changelog. The stale offsets stay inside the
new skb->head, which is never smaller than the old one, they
simply point past skb_tail_pointer() to bytes that are gone.
Thanks to Xuanqiang Luo for insisting on this.
Also invalidate the inner header state, as suggested by the
netdev AI review :
https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com
Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function")
Reported-by: syzbot+586af68eb819833c2d91@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6aa3e9d3.f2639fcc.29487d.0028.GAE@google.com/
Cc: Xuanqiang Luo <xuanqiang.luo@linux.dev>
Cc: Allison Henderson <achender@kernel.org>
Cc: rds-devel@oss.oracle.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
---
net/core/skbuff.c | 32 ++++++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index cc3b4b70288b4e3f17984cd4f4e4b7a330353e15..609f2c7f4a47ad7a81426af149727fa47be12bb5 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -6832,6 +6832,34 @@ struct sk_buff *alloc_skb_with_frags(unsigned long header_len,
}
EXPORT_SYMBOL(alloc_skb_with_frags);
+/* pskb_carve_inside_header() and pskb_carve_inside_nonlinear()
+ * remove the first bytes of a packet and reallocate skb->head.
+ *
+ * Whatever headers were present before the operation are gone,
+ * we must not leave stale offsets, otherwise users of this skb
+ * (skb_dump(), drop_monitor, taps, ...) would read or pull garbage.
+ */
+static void skb_carve_reset_headers(struct sk_buff *skb)
+{
+ skb_unset_mac_header(skb);
+ skb_unset_transport_header(skb);
+ skb_reset_network_header(skb);
+ skb->mac_len = 0;
+
+ /* Inner offsets have no "unset" marker, zero them so that
+ * skb_inner_network_header_was_set() becomes false and no
+ * consumer mistakes them for a real (and long gone) header.
+ */
+ skb->inner_mac_header = 0;
+ skb->inner_network_header = 0;
+ skb->inner_transport_header = 0;
+ skb->inner_protocol = 0;
+ skb->encapsulation = 0;
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ skb->ip_summed = CHECKSUM_NONE;
+}
+
/* carve out the first off bytes from skb when off < headlen */
static int pskb_carve_inside_header(struct sk_buff *skb, const u32 off,
const int headlen, gfp_t gfp_mask)
@@ -6887,7 +6915,7 @@ static int pskb_carve_inside_header(struct sk_buff *skb, const u32 off,
skb->head_frag = 0;
skb_set_end_offset(skb, size);
skb_set_tail_pointer(skb, skb_headlen(skb));
- skb_headers_offset_update(skb, 0);
+ skb_carve_reset_headers(skb);
skb->cloned = 0;
skb->hdr_len = 0;
skb->nohdr = 0;
@@ -7027,7 +7055,7 @@ static int pskb_carve_inside_nonlinear(struct sk_buff *skb, const u32 off,
skb->data = data;
skb_set_end_offset(skb, size);
skb_reset_tail_pointer(skb);
- skb_headers_offset_update(skb, 0);
+ skb_carve_reset_headers(skb);
skb->cloned = 0;
skb->hdr_len = 0;
skb->nohdr = 0;
--
2.55.0.1032.g73a4cd73de-goog
next reply other threads:[~2026-09-15 13:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-15 13:04 Eric Dumazet [this message]
2026-09-15 14:18 ` [PATCH v2 net] net: skbuff: do not leave stale header offsets after pskb_carve() Xuanqiang Luo
2026-09-16 13:05 ` netdev-bot+sashiko
2026-09-17 14:03 ` Paolo Abeni
2026-09-17 14:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260915130423.3956471-1-edumazet@google.com \
--to=edumazet@google.com \
--cc=achender@kernel.org \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rds-devel@oss.oracle.com \
--cc=syzbot+586af68eb819833c2d91@syzkaller.appspotmail.com \
--cc=xuanqiang.luo@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox