Netdev List
 help / color / mirror / Atom feed
From: Selvamani Rajagopal via B4 Relay <devnull+Selvamani.Rajagopal.onsemi.com@kernel.org>
To: Selva Rajagopal <selvamani.rajagopal@onsemi.com>,
	 Andrew Lunn <andrew+netdev@lunn.ch>,
	 "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	 Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,  Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Piergiorgio Beruto <pier.beruto@onsemi.com>,
	 Parthiban Veerasooran <parthiban.veerasooran@microchip.com>,
	 Simon Horman <horms@kernel.org>,
	Jonathan Corbet <corbet@lwn.net>,
	 Shuah Khan <skhan@linuxfoundation.org>,
	 Randy Dunlap <rdunlap@infradead.org>,
	 Richard Cochran <richardcochran@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	 Heiner Kallweit <hkallweit1@gmail.com>,
	 Russell King <linux@armlinux.org.uk>
Cc: Selva Rajagopal <Selvamani.Rajagopal@onsemi.com>,
	 netdev@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	 Jerry Ray <jerry.ray@microchip.com>,
	 Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH net-next v8 01/11] dt-bindings: net: add onsemi's S2500
Date: Mon, 28 Sep 2026 15:25:08 -0700	[thread overview]
Message-ID: <20260928-s2500-mac-phy-support-v8-1-7e011aacc309@onsemi.com> (raw)
In-Reply-To: <20260928-s2500-mac-phy-support-v8-0-7e011aacc309@onsemi.com>

From: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>

Add device tree binding for the onsemi S2500 IEEE 802.3cg
compliant Ethernet transceiver device.

S2500 has both Media Access Controller (MAC) and 10Base-T1S
Ethernet PHY. MAC implements 10 Mbps half duplex Ethernet
MAC. Communication between the host and MAC-PHY is defined in
OPEN Alliance 10BASE-T1x MACPHY Serial Interface document

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>

---
changes in v8
  - Changed the interrupt type to level triggered
  - Added reset-gpio entry that was recently supported.
changes in v7
  - Added the missing review tag
  - Removed the word YAML from the commit message
changes in v6
  - Moved the signed off information to the right place.
changes in v5
  - no changes
changes in v4:
  - added spi-max-frequency as suggested by AI review
  - changed interrupt to IRQ_TYPE_EDGE_FALLING as it is
    being taken care in net (stable) branch
changes in v3
  - Removed URL link that failed verification
changes in v2
  - removed spi-max-frequency entry
  - changed the compatible string to s2500
changes in v1
  - Added the first version of YAML file for onsemi MAC-PHY
---
 .../devicetree/bindings/net/onnn,s2500.yaml        | 72 ++++++++++++++++++++++
 MAINTAINERS                                        |  7 +++
 2 files changed, 79 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/onnn,s2500.yaml b/Documentation/devicetree/bindings/net/onnn,s2500.yaml
new file mode 100644
index 000000000000..97d1cda36683
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/onnn,s2500.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/onnn,s2500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: onsemi S2500 10BASE-T1S MACPHY Ethernet Controllers
+
+maintainers:
+  - Piergiorgio Beruto <pier.beruto@onsemi.com>
+  - Selva Rajagopal <Selvamani.Rajagopal@onsemi.com>
+
+description:
+  The S2500 combines a Media Access Controller (MAC) and an
+  Ethernet PHY to enable 10BASE‑T1S networks. The Ethernet Media Access
+  Controller (MAC) module implements a 10 Mbps half duplex Ethernet MAC,
+  compatible with the IEEE 802.3 standard and a 10BASE-T1S physical layer
+  transceiver integrated into the S2500. The communication between
+  the host and the MAC-PHY is specified in the OPEN Alliance 10BASE-T1x
+  MACPHY Serial Interface (TC6).
+
+allOf:
+  - $ref: /schemas/net/ethernet-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: onnn,s2500
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt from MAC-PHY asserted in the event of Receive Chunks
+      Available, Transmit Chunk Credits Available and Extended Status
+      Event.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO connected to the active-low RST_N pin of the MAC-PHY.
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 25000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ethernet@0 {
+        compatible = "onnn,s2500";
+        reg = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&eth0_pins>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        spi-max-frequency = <15000000>;
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 6de1ff058db6..64da809e4602 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20426,6 +20426,13 @@ S:	Supported
 W:	http://www.onsemi.com
 F:	drivers/net/phy/ncn*
 
+ONSEMI S2500 10BASE-T1S MACPHY ETHERNET DRIVER
+M:	Selva Rajagopal <selvamani.rajagopal@onsemi.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/net/onnn,s2500.yaml
+F:	drivers/net/ethernet/onsemi/s2500/s2500_*
+
 OP-TEE DRIVER
 M:	Jens Wiklander <jenswi@kernel.org>
 L:	op-tee@lists.trustedfirmware.org (moderated for non-subscribers)

-- 
2.43.0



  reply	other threads:[~2026-09-28 22:25 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-28 22:25 [PATCH net-next v8 00/11] Support for onsemi's S2500 10Base-T1S MAC-PHY Selvamani Rajagopal via B4 Relay
2026-09-28 22:25 ` Selvamani Rajagopal via B4 Relay [this message]
2026-09-28 22:46   ` [PATCH net-next v8 01/11] dt-bindings: net: add onsemi's S2500 Selvamani Rajagopal
2026-09-28 22:25 ` [PATCH net-next v8 02/11] Documentation: networking: Add timestamp related APIs to OA TC6 framework Selvamani Rajagopal via B4 Relay
2026-10-06 12:15   ` Andrew Lunn
2026-09-28 22:25 ` [PATCH net-next v8 03/11] net: ethernet: oa_tc6: Move oa_tc6.c to its own directory Selvamani Rajagopal via B4 Relay
2026-10-06 12:22   ` Andrew Lunn
2026-09-28 22:25 ` [PATCH net-next v8 04/11] net: ethernet: oa_tc6: Move constant definitions to header file Selvamani Rajagopal via B4 Relay
2026-10-06 12:24   ` Andrew Lunn
2026-09-28 22:25 ` [PATCH net-next v8 05/11] net: ethernet: oa_tc6: Support for hardware timestamp Selvamani Rajagopal via B4 Relay
2026-10-06  1:08   ` Jakub Kicinski
2026-10-06 16:19     ` Selvamani Rajagopal
2026-10-06 12:48   ` Andrew Lunn
2026-10-08  0:33     ` Selvamani Rajagopal
2026-09-28 22:25 ` [PATCH net-next v8 06/11] net: ethernet: oa_tc6: Support for vendor specific MMS Selvamani Rajagopal via B4 Relay
2026-09-28 22:25 ` [PATCH net-next v8 07/11] net: phy: ncn26000: Support for onsemi's S2500 internal phy Selvamani Rajagopal via B4 Relay
2026-09-28 22:50   ` Selvamani Rajagopal
2026-09-29 11:54     ` Andrew Lunn
2026-09-28 22:25 ` [PATCH net-next v8 08/11] net: phy: ncn26000: Enable enhanced noise immunity Selvamani Rajagopal via B4 Relay
2026-09-28 22:25 ` [PATCH net-next v8 09/11] net: phy: ncn26000: Support for loopback Selvamani Rajagopal via B4 Relay
2026-10-06 13:05   ` Andrew Lunn
2026-10-07 19:18     ` Selvamani Rajagopal
2026-10-07 20:04       ` Andrew Lunn
2026-10-06 13:06   ` Andrew Lunn
2026-09-28 22:25 ` [PATCH net-next v8 10/11] onsemi: s2500: Add driver support for S2500 MAC-PHY Selvamani Rajagopal via B4 Relay
2026-10-06 13:54   ` Andrew Lunn
2026-10-07 18:27     ` Selvamani Rajagopal
2026-10-07 18:29       ` Andrew Lunn
2026-09-28 22:25 ` [PATCH net-next v8 11/11] onsemi: s2500: Added selftest support to onsemi's S2500 driver Selvamani Rajagopal via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260928-s2500-mac-phy-support-v8-1-7e011aacc309@onsemi.com \
    --to=devnull+selvamani.rajagopal.onsemi.com@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=jerry.ray@microchip.com \
    --cc=krzk+dt@kernel.org \
    --cc=krzysztof.kozlowski@oss.qualcomm.com \
    --cc=kuba@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=parthiban.veerasooran@microchip.com \
    --cc=pier.beruto@onsemi.com \
    --cc=rdunlap@infradead.org \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=selvamani.rajagopal@onsemi.com \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox