[PATCH net-next v8 08/11] net: phy: ncn26000: Enable enhanced noise immunity

[Selvamani Rajagopal via B4 Relay <devnull+Selvamani.Rajagopal.onsemi.com@kernel.org>]

From: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>

By setting ENI bit, noise immunity is improved and it is
specifically meant for PLCA enabled nodes.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>

---
changes in v8
  - No change
changes in v7
  - No change
changes in v6
  - No change
changes in v5
  - No changes
changes in v4
  - No changes
changes in v3
  - Moved as a separate patch
---
 drivers/net/phy/ncn26000.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/ncn26000.c b/drivers/net/phy/ncn26000.c
index 374684e11fac..b362e85c7911 100644
--- a/drivers/net/phy/ncn26000.c
+++ b/drivers/net/phy/ncn26000.c
@@ -36,6 +36,10 @@
 
 #define TO_TMR_DEFAULT			32
 
+#define NCN26000_REG_PHYCFG1		0x8001
+#define NCN26000_PHYCFG1_ENI		BIT(7)
+#define NCN26000_PHYCFG1_ENI_MASK	BIT(7)
+
 static int ncn26000_config_init(struct phy_device *phydev)
 {
 	int ret = 0;
@@ -106,6 +110,24 @@ static int ncn26000_read_status(struct phy_device *phydev)
 	return 0;
 }
 
+/* Intercept PLCA enable/disable request to
+ * set the proprietary, ENI mode accordingly
+ */
+static int ncn26000_c45_plca_set_cfg(struct phy_device *phydev,
+				     const struct phy_plca_cfg *plca_cfg)
+{
+	int ret = genphy_c45_plca_set_cfg(phydev, plca_cfg);
+	u16 eni_cfg = 0;
+
+	if (ret || plca_cfg->enabled < 0)
+		return ret;
+
+	eni_cfg = (plca_cfg->enabled) ? NCN26000_PHYCFG1_ENI : 0;
+	return phy_modify_mmd(phydev, MDIO_MMD_VEND2,
+			      NCN26000_REG_PHYCFG1,
+			      NCN26000_PHYCFG1_ENI_MASK, eni_cfg);
+}
+
 static irqreturn_t ncn26000_handle_interrupt(struct phy_device *phydev)
 {
 	int ret;
@@ -156,7 +178,7 @@ static struct phy_driver ncn26000_driver[] = {
 		.config_aneg           = ncn26000_config_aneg,
 		.read_status           = ncn26000_read_status,
 		.handle_interrupt      = ncn26000_handle_interrupt,
-		.set_plca_cfg          = genphy_c45_plca_set_cfg,
+		.set_plca_cfg          = ncn26000_c45_plca_set_cfg,
 		.get_plca_cfg          = genphy_c45_plca_get_cfg,
 		.get_plca_status       = genphy_c45_plca_get_status,
 		.soft_reset            = genphy_soft_reset,
@@ -177,7 +199,7 @@ static struct phy_driver ncn26000_driver[] = {
 		.read_status		= ncn26000_read_status,
 		.handle_interrupt       = ncn26000_handle_interrupt,
 		.get_plca_cfg		= genphy_c45_plca_get_cfg,
-		.set_plca_cfg		= genphy_c45_plca_set_cfg,
+		.set_plca_cfg		= ncn26000_c45_plca_set_cfg,
 		.get_plca_status	= genphy_c45_plca_get_status,
 		.soft_reset             = genphy_soft_reset,
 	},

-- 
2.43.0