[PATCH 4/5] dt-bindings: net: maxlinear: add MxL86211C lane mapping support

[Robert Marko <robert.marko@sartura.hr>]

Describe the optional lane-to-ASP mapping for the MxL86211C PHY.

The mapping accounts for board-level swaps between its physical TPI
lanes and analog signal processing lanes.

MxL86211C supports per lane mapping.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
 .../bindings/net/maxlinear,gpy2xx.yaml        | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
index 0645e885f1747..b98cb3c3e6d49 100644
--- a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
+++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
@@ -22,6 +22,21 @@ allOf:
 
     then:
       properties:
+        maxlinear,lane-asp-map:
+          description: |
+            Mapping of the physical TPI lanes A through D to the PHY's
+            analog signal processing lanes (ASPs). The array index identifies
+            physical lane A, B, C, or D, while its value identifies ASP A, B,
+            C, or D, encoded as 0 through 3. Each ASP must be mapped exactly
+            once. Omit the property to retain the hardware reset mapping.
+          $ref: /schemas/types.yaml#/definitions/uint32-array
+          minItems: 4
+          maxItems: 4
+          uniqueItems: true
+          items:
+            minimum: 0
+            maximum: 3
+
         mdio-regulator:
           type: object
           description: |
@@ -34,6 +49,7 @@ allOf:
 
     else:
       properties:
+        maxlinear,lane-asp-map: false
         mdio-regulator: false
 
 properties:
@@ -78,6 +94,9 @@ examples:
                          "ethernet-phy-ieee802.3-c45";
             reg = <0>;
 
+            /* Swap physical TPI lanes C and D. */
+            maxlinear,lane-asp-map = <0 1 3 2>;
+
             mdio: mdio-regulator {
                 regulator-min-microvolt = <1800000>;
                 regulator-max-microvolt = <1800000>;
-- 
2.55.0