From: Linus Walleij <linusw@kernel.org>
To: "Hans Ulli Kroll" <ulli.kroll@googlemail.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
"Myeonghun Pak" <mhun512@gmail.com>,
"Eric Dumazet" <edumazet@kernel.org>
Cc: netdev@vger.kernel.org, Linus Walleij <linusw@kernel.org>
Subject: [PATCH net-next v3 01/12] net: ethernet: cortina: Keep PHY-less port bound for shared IRQ
Date: Fri, 02 Oct 2026 18:24:40 +0200 [thread overview]
Message-ID: <20261002-gemini-ethernet-fixes-3-v3-1-3e1f25890ae8@kernel.org> (raw)
In-Reply-To: <20261002-gemini-ethernet-fixes-3-v3-0-3e1f25890ae8@kernel.org>
The software free queue interrupt is routed through port 1 even on
boards which only connect a PHY to port 0. Since PHY setup was moved
into probe, the PHY-less port fails to bind after installing its parent
pointer. This leaves a dangling port pointer and releases the threaded
handler needed by the shared queue.
Keep children without a PHY description bound as IRQ-only ports. Clear
parent pointers on genuine probe failures and removal, and reject queue
setup cleanly if the port providing the shared interrupt is absent.
Fixes: 3e813d61401a ("net: gemini: Clean up phy registration")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
drivers/net/ethernet/cortina/gemini.c | 29 ++++++++++++++++++++++++++---
1 file changed, 26 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index 2fe7fd0202d2..2be3e9051981 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -1048,10 +1048,15 @@ static int geth_resize_freeq(struct gemini_ethernet_port *port)
u32 en;
int ret;
+ /* The software free queue interrupt is routed through port 1. */
+ if (!geth->port1)
+ return -ENODEV;
+
if (netdev->dev_id == 0)
- other_netdev = geth->port1->netdev;
+ other_port = geth->port1;
else
- other_netdev = geth->port0->netdev;
+ other_port = geth->port0;
+ other_netdev = other_port ? other_port->netdev : NULL;
if (other_netdev && netif_running(other_netdev))
return -EBUSY;
@@ -1062,7 +1067,6 @@ static int geth_resize_freeq(struct gemini_ethernet_port *port)
new_size,
port->rxq_order);
if (other_netdev) {
- other_port = netdev_priv(other_netdev);
new_size += 1 << (other_port->rxq_order + 1);
netdev_dbg(other_netdev, "port %d size: %d order %d\n",
other_netdev->dev_id,
@@ -2384,6 +2388,16 @@ static irqreturn_t gemini_port_irq(int irq, void *data)
return ret;
}
+static void gemini_port_clear(struct gemini_ethernet_port *port)
+{
+ struct gemini_ethernet *geth = port->geth;
+
+ if (!port->id && geth->port0 == port)
+ geth->port0 = NULL;
+ else if (port->id && geth->port1 == port)
+ geth->port1 = NULL;
+}
+
static void gemini_port_remove(struct gemini_ethernet_port *port)
{
if (port->netdev) {
@@ -2392,6 +2406,7 @@ static void gemini_port_remove(struct gemini_ethernet_port *port)
}
clk_disable_unprepare(port->pclk);
geth_cleanup_freeq(port->geth);
+ gemini_port_clear(port);
}
static void gemini_ethernet_init(struct gemini_ethernet *geth)
@@ -2598,6 +2613,13 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
if (ret)
goto unprepare;
+ if (!of_property_present(np, "phy-handle") &&
+ !of_phy_is_fixed_link(np)) {
+ dev_info(dev, "no PHY, keeping port for shared IRQ\n");
+ port->netdev = NULL;
+ return 0;
+ }
+
ret = gmac_setup_phy(netdev);
if (ret) {
netdev_err(netdev,
@@ -2612,6 +2634,7 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
return 0;
unprepare:
+ gemini_port_clear(port);
clk_disable_unprepare(port->pclk);
return ret;
}
--
2.55.0
next prev parent reply other threads:[~2026-10-02 16:24 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-02 16:24 [PATCH net-next v3 00/12] net: ethernet: cortina: Fix Gemini RX buffer management Linus Walleij
2026-10-02 16:24 ` Linus Walleij [this message]
2026-10-06 17:19 ` [PATCH net-next v3 01/12] net: ethernet: cortina: Keep PHY-less port bound for shared IRQ netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 02/12] net: ethernet: cortina: Keep shared free queue parent-owned Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 03/12] net: ethernet: cortina: Drain free queue IRQ before resize Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 04/12] net: ethernet: cortina: Correct free queue DMA mappings Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 05/12] net: ethernet: cortina: Index free queue fragments with XArray Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 06/12] net: ethernet: cortina: Preserve in-flight free queue pages Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 07/12] net: ethernet: cortina: Rebuild free queue metadata for RX ring changes Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 08/12] net: ethernet: cortina: Rotate free queue page allocation Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 09/12] net: ethernet: cortina: Recycle claimed free queue pages Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 10/12] net: ethernet: cortina: Validate RX fragment lengths Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 11/12] net: ethernet: cortina: Release partial RX frames on stop Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 12/12] net: ethernet: cortina: Scale Gemini RX queues to system memory Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261002-gemini-ethernet-fixes-3-v3-1-3e1f25890ae8@kernel.org \
--to=linusw@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=kuba@kernel.org \
--cc=mhun512@gmail.com \
--cc=mirq-linux@rere.qmqm.pl \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ulli.kroll@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox