From: Linus Walleij <linusw@kernel.org>
To: "Hans Ulli Kroll" <ulli.kroll@googlemail.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
"Myeonghun Pak" <mhun512@gmail.com>,
"Eric Dumazet" <edumazet@kernel.org>
Cc: netdev@vger.kernel.org, Linus Walleij <linusw@kernel.org>
Subject: [PATCH net-next v3 10/12] net: ethernet: cortina: Validate RX fragment lengths
Date: Fri, 02 Oct 2026 18:24:49 +0200 [thread overview]
Message-ID: <20261002-gemini-ethernet-fixes-3-v3-10-3e1f25890ae8@kernel.org> (raw)
In-Reply-To: <20261002-gemini-ethernet-fixes-3-v3-0-3e1f25890ae8@kernel.org>
RX descriptor lengths are used to adjust the page offset and populate skb
fragments without checking that the resulting range remains inside the
posted free queue fragment. A zero-length descriptor is logged but is still
appended.
The backing page is larger than the default 2 KiB DMA fragment, so checking
only the page boundary would allow a malformed descriptor for the first
half of a page to consume data from the sibling fragment. That fragment may
still be owned by the device.
Reject a short initial fragment before applying NET_IP_ALIGN, reject frame
length underflow and ranges extending beyond either the DMA fragment or the
page, and drop zero-length fragments instead of adding them to the skb.
Account these descriptor inconsistencies as drops rather than wire length
errors.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
drivers/net/ethernet/cortina/gemini.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index a0186cc4b943..6b333eb81f9c 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -1697,6 +1697,7 @@ static unsigned int gmac_rx(struct net_device *netdev, unsigned int budget,
struct gemini_ethernet_port *port = netdev_priv(netdev);
unsigned short m = (1 << port->rxq_order) - 1;
struct gemini_ethernet *geth = port->geth;
+ unsigned int freeq_frag_len = 1 << geth->freeq_frag_order;
void __iomem *ptr_reg = port->rxq_rwptr;
unsigned int frag_nr = port->rx_frag_nr;
struct sk_buff *skb = port->rx_skb;
@@ -1771,6 +1772,9 @@ static unsigned int gmac_rx(struct net_device *netdev, unsigned int budget,
if (!skb)
goto err_drop;
+ if (frag_len < NET_IP_ALIGN)
+ goto err_drop;
+
page_offs += NET_IP_ALIGN;
frag_len -= NET_IP_ALIGN;
frag_nr = 0;
@@ -1779,15 +1783,26 @@ static unsigned int gmac_rx(struct net_device *netdev, unsigned int budget,
goto err_drop;
}
- if (word3.bits32 & EOF_BIT)
+ if (word3.bits32 & EOF_BIT) {
+ if (frame_len < skb->len)
+ goto err_drop;
frag_len = frame_len - skb->len;
+ }
/* append page frag to skb */
if (frag_nr == MAX_SKB_FRAGS)
goto err_drop;
+ if (frag_len > freeq_frag_len -
+ (page_offs & (freeq_frag_len - 1)) ||
+ frag_len > PAGE_SIZE - page_offs)
+ goto err_drop;
- if (frag_len == 0 && net_ratelimit())
- netdev_err(netdev, "Received fragment with len = 0\n");
+ if (!frag_len) {
+ if (net_ratelimit())
+ netdev_err(netdev,
+ "Received fragment with len = 0\n");
+ goto err_drop;
+ }
skb_fill_page_desc(skb, frag_nr, page, page_offs, frag_len);
skb->len += frag_len;
--
2.55.0
next prev parent reply other threads:[~2026-10-02 16:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-02 16:24 [PATCH net-next v3 00/12] net: ethernet: cortina: Fix Gemini RX buffer management Linus Walleij
2026-10-02 16:24 ` [PATCH net-next v3 01/12] net: ethernet: cortina: Keep PHY-less port bound for shared IRQ Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 02/12] net: ethernet: cortina: Keep shared free queue parent-owned Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 03/12] net: ethernet: cortina: Drain free queue IRQ before resize Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 04/12] net: ethernet: cortina: Correct free queue DMA mappings Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 05/12] net: ethernet: cortina: Index free queue fragments with XArray Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 06/12] net: ethernet: cortina: Preserve in-flight free queue pages Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 07/12] net: ethernet: cortina: Rebuild free queue metadata for RX ring changes Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 08/12] net: ethernet: cortina: Rotate free queue page allocation Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 09/12] net: ethernet: cortina: Recycle claimed free queue pages Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` Linus Walleij [this message]
2026-10-06 17:19 ` [PATCH net-next v3 10/12] net: ethernet: cortina: Validate RX fragment lengths netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 11/12] net: ethernet: cortina: Release partial RX frames on stop Linus Walleij
2026-10-06 17:19 ` netdev-bot+sashiko
2026-10-02 16:24 ` [PATCH net-next v3 12/12] net: ethernet: cortina: Scale Gemini RX queues to system memory Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261002-gemini-ethernet-fixes-3-v3-10-3e1f25890ae8@kernel.org \
--to=linusw@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=kuba@kernel.org \
--cc=mhun512@gmail.com \
--cc=mirq-linux@rere.qmqm.pl \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ulli.kroll@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox