From: "Michael S. Tsirkin" <mst@redhat.com>
To: Eric Dumazet <edumazet@kernel.org>
Cc: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Willem de Bruijn <willemb@google.com>,
Simon Horman <horms@kernel.org>,
netdev@vger.kernel.org, edumazet@google.com
Subject: Re: [PATCH v3 net 0/3] net: always dissect GSO packets in __virtio_net_hdr_to_skb()
Date: Tue, 6 Oct 2026 18:37:45 -0400 [thread overview]
Message-ID: <20261006183410-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20261001191140.2818991-1-edumazet@kernel.org>
On Thu, Oct 01, 2026 at 07:11:37PM +0000, Eric Dumazet wrote:
> This series fixes a bypass of untrusted GSO flow dissection in
> __virtio_net_hdr_to_skb() when VIRTIO_NET_HDR_F_NEEDS_CSUM is not set,
> and adds a kselftest covering VLAN-tagged GSO packets without NEEDS_CSUM:
>
> - Patch 1 fixes __skb_flow_dissect(), which computes key_control->thoff
> with min_t(u16, ...). This truncates skb->len and returns a bogus small
> transport offset when skb->len modulo 65536 is smaller than the
> transport offset. Offsets that do not fit in the u16 thoff now fail the
> dissection instead of being silently truncated.
>
> - Patch 2 initializes skb->dev and skb->network_header before calling
> virtio_net_hdr_*_to_skb() in tun_get_user(), tun_xdp_one(),
> virtnet_receive_done(), and raw_verify_header(), removes the
> '&& skb->network_header' condition and the unvalidated
> 'else if (gso_type)' fallback in __virtio_net_hdr_to_skb(), and moves
> virtio_net_hdr_match_proto() after skb_flow_dissect_flow_keys_basic()
> so it validates the dissected L3 protocol (keys.basic.n_proto) rather
> than the outer L2 protocol.
>
> - Patch 3 adds kselftests in tools/testing/selftests/net/tun.c verifying
> that VLAN-tagged (802.1Q) TCPv4 GSO packets without NEEDS_CSUM (both
> flags = 0 and flags = VIRTIO_NET_HDR_F_DATA_VALID) are accepted on a
> TAP device, that mismatched GSO types and truncated TCP headers without
> NEEDS_CSUM are rejected with -EINVAL, and that a 65540-byte frame is
> accepted.
>
> v3:
> - New patch 1: avoid u16 truncation of skb->len when computing thoff in
> __skb_flow_dissect(). Patch 2 makes tun_get_user() dissect IFF_TAP
> frames before eth_type_trans(), with skb->len up to 65549 for a GSO
> frame carrying a maximal IPv4 packet (Sashiko).
> - Patch 3: truncate the TCP header after 10 bytes so that the test
> requires the transport offset found by flow dissection, and add a
> 65540-byte frame test (Sashiko).
> - Link to v2: https://lore.kernel.org/netdev/20260928144254.3361044-1-edumazet@kernel.org/
>
> v2:
> - Patch 2: drop the pre-dissection virtio_net_hdr_match_proto() check
> inside 'if (!skb->protocol)' so VLAN-tagged GSO frames without
> NEEDS_CSUM are not rejected before flow dissection (Michael S. Tsirkin).
> - Patch 2: clarify the changelog regarding why skb->network_header was 0
> in those callers and why skb_reset_mac_header() is dropped in
> tun_get_user() for IFF_TUN (Michael S. Tsirkin).
> - Patch 3: add selftest in tools/testing/selftests/net/tun.c based on
> Michael's reproducer.
> - Link to v1: https://lore.kernel.org/netdev/20260927195536.2489079-1-edumazet@google.com/
Not without trepidation about the amount of stuff we are shoving
into virtio_net_hdr_to_skb which, believe me or not, used to be 50 LOC
of trivial code in 2019:
Acked-by: Michael S. Tsirkin <mst@redhat.com>
> Eric Dumazet (3):
> flow_dissector: avoid u16 truncation of skb->len when computing thoff
> net: always dissect GSO packets in __virtio_net_hdr_to_skb()
> selftests: net: tun: add test for VLAN-tagged GSO without NEEDS_CSUM
>
> arch/um/drivers/vector_transports.c | 1 +
> drivers/net/tun.c | 23 +++--
> drivers/net/virtio_net.c | 2 +
> include/linux/virtio_net.h | 60 +++++-------
> net/core/flow_dissector.c | 9 +-
> tools/testing/selftests/net/tun.c | 136 ++++++++++++++++++++++++++++
> 6 files changed, 186 insertions(+), 45 deletions(-)
>
> --
> 2.56.0.rc1.315.gc6ed9934b7-goog
next prev parent reply other threads:[~2026-10-06 22:37 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-01 19:11 [PATCH v3 net 0/3] net: always dissect GSO packets in __virtio_net_hdr_to_skb() Eric Dumazet
2026-10-01 19:11 ` [PATCH v3 net 1/3] flow_dissector: avoid u16 truncation of skb->len when computing thoff Eric Dumazet
2026-10-01 23:30 ` Willem de Bruijn
2026-10-05 15:30 ` netdev-bot+sashiko
2026-10-05 19:38 ` Eric Dumazet
2026-10-01 19:11 ` [PATCH v3 net 2/3] net: always dissect GSO packets in __virtio_net_hdr_to_skb() Eric Dumazet
2026-10-01 19:11 ` [PATCH v3 net 3/3] selftests: net: tun: add test for VLAN-tagged GSO without NEEDS_CSUM Eric Dumazet
2026-10-01 23:37 ` Willem de Bruijn
2026-10-06 22:37 ` Michael S. Tsirkin [this message]
2026-10-06 23:26 ` [PATCH v3 net 0/3] net: always dissect GSO packets in __virtio_net_hdr_to_skb() Willem de Bruijn
2026-10-06 23:49 ` Michael S. Tsirkin
2026-10-07 0:13 ` Willem de Bruijn
2026-10-07 0:18 ` Michael S. Tsirkin
2026-10-07 0:30 ` Willem de Bruijn
2026-10-07 8:04 ` Michael S. Tsirkin
2026-10-07 14:21 ` Willem de Bruijn
2026-10-06 23:00 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261006183410-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=edumazet@kernel.org \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox