Netdev List
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
	edumazet@kernel.org, andrew+netdev@lunn.ch,
	netdev@vger.kernel.org
Cc: Jacob Keller <jacob.e.keller@intel.com>,
	anthony.l.nguyen@intel.com, maciej.machnikowski@intel.com,
	przemyslaw.korba@intel.com, grzegorz.nitka@intel.com,
	sergey.temerkhanov@intel.com, arkadiusz.kubalewski@intel.com,
	poros@redhat.com, richardcochran@gmail.com, horms@kernel.org
Subject: [PATCH net v3 04/14] ice: set in_use only after preparing Tx timestamp index
Date: Thu, 15 Oct 2026 12:10:50 -0700	[thread overview]
Message-ID: <20261015191102.1174111-5-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20261015191102.1174111-1-anthony.l.nguyen@intel.com>

From: Jacob Keller <jacob.e.keller@intel.com>

The ice_ptp_request_ts() function is used to request a timestamp index for
use with a packet. When reserving an index, it sets the start time and
saves a pointer to the skb into the appropriate index. The function marks
the in_use bit first before doing any of these steps. The IRQ handler which
clears the timestamps reads the in_use bits uses a lockless flow for
reading the in_use bits to determine which ones are in-use. This is
necessary as actually processing a complete timestamp must be able to sleep
so we cannot hold the timestamp tracker lock over the entire sequence.
Additionally, blocking the Tx hotpath with such a lock indefinitely would
be problematic.

However, the existing flow now has a very narrow window where the IRQ
handler could see a timestamp as in-use but read a stale value for its
"start" time.

Fix this by ordering the sequence to mark the in_use bit last, and add a
memory barrier to prevent re-ordering of the previous writes to setup the
index.

This was found and reported by Sashiko while reviewing an unrelated change.

Closes: https://sashiko.dev/#/patchset/20260821-jk-e825c-minimized-fixes-v1-0-9d0731eb4858%40intel.com?part=7
Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ptp.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index d1cdd38ea27c..11416e23dade 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -592,6 +592,12 @@ static void ice_ptp_process_tx_tstamp(struct ice_ptp_tx *tx)
 		bool drop_ts = !link_up;
 		struct sk_buff *skb;
 
+		/* Paired with smp_mb__before_atomic() in ice_ptp_request_ts()
+		 * to ensure ordering the in_use bitmap and the indexed fields
+		 * in the tstamps array.
+		 */
+		smp_rmb();
+
 		/* Drop packets which have waited for more than 2 seconds */
 		if (time_is_before_jiffies(tx->tstamps[idx].start + 2 * HZ)) {
 			drop_ts = true;
@@ -2674,11 +2680,13 @@ s8 ice_ptp_request_ts(struct ice_ptp_tx *tx, struct sk_buff *skb)
 		 * a reference to the skb and the start time to allow discarding old
 		 * requests.
 		 */
-		set_bit(idx, tx->in_use);
-		clear_bit(idx, tx->stale);
 		tx->tstamps[idx].start = jiffies;
 		tx->tstamps[idx].skb = skb_get(skb);
 		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+		clear_bit(idx, tx->stale);
+		/* Ensure index is setup before marking it as used */
+		smp_mb__before_atomic();
+		set_bit(idx, tx->in_use);
 		ice_trace(tx_tstamp_request, skb, idx);
 	}
 
-- 
2.47.1


  parent reply	other threads:[~2026-10-15 19:11 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-15 19:10 [PATCH net v3 00/14][pull request] ice: E82x: timestamp processing logic fixes Tony Nguyen
2026-10-15 19:10 ` [PATCH net v3 01/14] ice: fix removal of PTP timestamp tracker during reset Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-19 23:14     ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 02/14] ice: use reference counting and SRCU for PTP port access Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-19 23:16     ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 03/14] ice: fix PHY port restart serialization Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-19 23:21     ` Jacob Keller
2026-10-15 19:10 ` Tony Nguyen [this message]
2026-10-15 19:10 ` [PATCH net v3 05/14] ice: call PTP link change only from link events Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-19 23:35     ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 06/14] ice: E822: keep Tx timestamps disabled during offset calibration Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-19 23:37     ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 07/14] ice: E822: cancel offset verification work during reset preparation Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-19 23:40     ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 08/14] ice: E825: stop clearing PHY_REG_TX_OFFSET_READY Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-19 23:42     ` Jacob Keller
2026-10-20  1:53       ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 09/14] ice: E825: clear PHY_TSTAMP memory prior to soft reset Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-19 23:49     ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 10/14] ice: E825: perform a soft reset when starting the PHY timer Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-19 23:57     ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 11/14] ice: wait for in-flight Tx timestamps before removing the tracker Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-20  0:05     ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 12/14] ice: keep Tx timestamp slots tracked until completion or timeout Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-20  0:11     ` Jacob Keller
2026-10-15 19:10 ` [PATCH net v3 13/14] ice: skip reading Tx ready bitmap on ports with no timestamps Tony Nguyen
2026-10-15 19:11 ` [PATCH net v3 14/14] ice: don't clear in_use until HW clears ready bitmap Tony Nguyen
2026-10-19 20:14   ` netdev-bot+sashiko
2026-10-20  0:18     ` Jacob Keller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261015191102.1174111-5-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=arkadiusz.kubalewski@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=grzegorz.nitka@intel.com \
    --cc=horms@kernel.org \
    --cc=jacob.e.keller@intel.com \
    --cc=kuba@kernel.org \
    --cc=maciej.machnikowski@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=poros@redhat.com \
    --cc=przemyslaw.korba@intel.com \
    --cc=richardcochran@gmail.com \
    --cc=sergey.temerkhanov@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox